Results 1 to 15 of 15

Thread: Another "Clunk"..... This is where you tell me this is normal and not to worry.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jan 2009
    Location
    1999, Ebony Black, VX, 1614
    Posts
    1,852
    Thanked: 1

    Another "Clunk"..... This is where you tell me this is normal and not to worry.

    When I turn the wheel full turn to the left and back up and give it some gas, using a little bit of a heavy foot, I get a clunk similar to the clunk that is normal when you let off the gas then apply the gas, or when you move from drive to park, or when you come to a stop, or when its a full moon, etc.

    My tires are ???? but I do know that they are over size. My first thought was maybe they caught the cladding closest to my door.

    Its normal right, everything is fine, go back to enjoying my VX?


    Thanks!

  2. #2
    Member Since
    Apr 2004
    Location
    2000, Ebony, VX, 0370
    Posts
    2,503
    Thanked: 12
    Just don't turn it full left.

    Seriously; unless there is some accompanying grinding or "cat in a blender" sounds I wouldn't worry about it too much. I tend to get some clunking in my steering wheel (more of a feel than a sound), and I'm wondering if things are just starting to get sloppy in there. The truck is nine years old now, so things are bound to start slopping up.

    There may be some "binding" issue when the wheel is in full lock under hard acceleration. Maybe get the front end up in the air (on jack stands, not launching a jump) and grab the wheels to see if there is any play in them. Maybe the bearings are tired?

    I'm not mechanic, and I can't tell you that this same thing has happened to me, but it doesn't sound catastrophic so I would say "Get out there and enjoy your VX."
    "The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
    -Douglas Adams, Mostly Harmless

  3. #3
    Member Since
    Jun 2002
    Location
    2001 Ebony S/C #1304
    Posts
    3,647
    Thanked: 10
    I get the same clunk with a hard turn while reversing. I only started getting it after a front end collision about 6-7 years ago and much of my suspension and steering was replaced. I looked and looked and looked and never saw a single thing that stood out, nor has anything gone wrong since, so I just ignored it. I would say, don't worry about it. Now if it happened going forward, I might find room for concern.
    Gary Noonan
    '01 S/C VX / '18 Forester XT

  4. #4
    Member Since
    Jan 2009
    Location
    1999, Ebony Black, VX, 1614
    Posts
    1,852
    Thanked: 1
    Thanks.

    Yeah, I wasnt too worried about it. I just was hoping no one would chime in with ...."Oh man! You better fix that now or the whole thing is going to melt down and turn into a honda civic"....

    I am pretty sure that it falls under the whole "lash" thing.

    Its only when I give it quick and heavy gas which according to the service bulletin "This clearance or free play (also known as lash) can translate into a clunk noise whenever the gear is loaded and unloaded quickly"

    The VX hasnt been in any wrecks, only has 52k on it and fits the mold for everything that is "normal" with VXes so I am sure its fine.

    Listen to me answer my own questions. Somtimes I just want to be hugged and told everything is okay.

  5. #5
    Member Since
    Nov 2008
    Location
    1999,Astral Silver,VX,1238
    Posts
    269
    Thanked: 0
    Quote Originally Posted by JAMAS View Post

    Listen to me answer my own questions. Somtimes I just want to be hugged and told everything is okay.

    Everything is gonna be okay.

  6. #6
    Member Since
    Jan 2009
    Location
    1999, Ebony Black, VX, 1614
    Posts
    1,852
    Thanked: 1
    Its kinda interesting.......

    With the number of questions and worries about the VX and the driveline lash(search "clunk") I was kinda under the impression it was an Isuzu thing. "Isuzus are loud". However, if you google "driveline lash" anybody with an AWD vehicle tends to complain about it and it all seems to be considered "normal"

  7. #7
    Member Since
    Jan 2008
    Location
    1999 Astral Silver 0481
    Posts
    2,672
    Thanked: 0

    Turning clunk

    Hi guys!
    My horse also suffer this clunk noise almost every time i steer 100% to any direction,like when doing a tight "U" turn.
    I think it has to do with the steering turning ratio (which in fact is very shot)against the VX curb weight causing the whole linkage to momentairly exceed its capacity
    Dakar was just the begining.

  8. #8
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0
    the only thing i would say is to check your steering components because if you have heavy tires it would wear them out quickly....other than that, it doesnt sound major
    "Do Not Seek Praise. Seek Criticism."

    "If You Can't Solve A Problem, It's Because You're Playing By The Rules."

    "The Perosn Who Doesn't Make Mistakes Is Unlikely To Make Anything."

    -Paul Arden

  9. #9
    Member Since
    Jan 2009
    Location
    1999, Ebony Black, VX, 1614
    Posts
    1,852
    Thanked: 1
    I will have the Isuzu service guys give it a full "checkup" on Monday.

    I am taking it in for an ALL FLUIDS SWAP. Swapping everything for new synthetic.

    Can't wait for my synthetic coolant and synthetic windshield washer fluid.

    I am assuming by "Steering Components" you mean CV-Joints, tie-rods, etc.

    I guess the other thing I neglected to mention is that this doesnt happen everytime I turn left. Its happened a total of 3 times and once was when I was trying to make it happen so I am only guessing at the cause, but it was only when I turned hard left from backing out of a parking space and doing a quick smokie and the bandit back out and leave. I will try leaving my wheel straight and doing that when I leave work and see if I get the same results. If so, I would say standard driveline lash.

    I'll keep you guys posted.

    Thanks again for the feedback.

Similar Threads

  1. Loud "clunk" when shifting out of Park
    By JoeU in forum VX Troubleshooting...
    Replies: 12
    Last Post: 06/16/2012, 11:18 AM
  2. Replies: 35
    Last Post: 10/04/2010, 02:37 PM
  3. Replies: 36
    Last Post: 10/12/2008, 06:59 PM
  4. "normal" tire sizes
    By Joe Isuzu in forum VX Troubleshooting...
    Replies: 18
    Last Post: 05/10/2007, 10:52 AM
  5. Suspension "clunk"
    By Triathlete in forum VX Troubleshooting...
    Replies: 8
    Last Post: 05/02/2006, 11:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails