Rain + Wet Roads + 2wd = :)

[PK]

Jap VX's have subtle differences -a 2wd option being one of them. Cloth seats, different headlights and marker lights, mirror on fender, rear view camera, 3.2 L motor...

Did not realise we have different headlights??

Unless it is just the LHD vs RHD aiming of the low beam??

PK

[Greasemonkey]

US headlights are clear whereas the JDM have the lens in glass behind the plastic cover like an older car
cheers
Steve

[rowhard]

US headlights are clear whereas the JDM have the lens in glass behind the plastic cover like an older car
cheers
Steve

and they dip to the left

[CIAUS]

US headlights are clear whereas the JDM have the lens in glass behind the plastic cover like an older car
cheers
Steve

US type, plastic reflector



JDM type, metal reflector+ round glass cover



JDM type converted to bixenon lenses (donor is BMW X5, D2S\D2R), before polishing.

[Sprey]

US type, plastic reflector



JDM type, metal reflector+ round glass cover



JDM type converted to bixenon lenses (donor is BMW X5, D2S\D2R), before polishing.

omg those biexenon lights are sick !!!

they actualy look light eye balls

[don moore]

i want some jdm lights

[VCrossfan]

More info on the BMW X5 Conversion. I know some others have started a conversion but I haven't seen a finished product ( unless I've missed the post) And does the X5 conversion use the original BMW starters, ballast, (if they use this process) wiring etc...

[CIAUS]

More info on the BMW X5 Conversion. I know some others have started a conversion but I haven't seen a finished product ( unless I've missed the post) And does the X5 conversion use the original BMW starters, ballast, (if they use this process) wiring etc...

Everybody likes a xenon light, but if you just put the H4 xenon bulb in to VX headlamp it will light like sh.. mmm not so well))). I would like to explain how to insert bixenon lenses to VX headlamp, for the exellent light ).
All this pics shown a JDM headlamps wich is little different, but I think, technology is the same vith US VX headlamps. I used Hella lenses only, all the rest (bulbs, starters etc) is SHOME.

1. First, you have to put you headlamp in to the oven with temperature approx 100 C (Celsium!!!) for a 10-15 min, until hermetic bekame soft, than use screw driver or knife for removing a front glass (use gloves - it is HOT)



2. Take out all the parts, remove a reflector, for the next step



3. prepare reflector for lens applying



4. 90 mm Hella bixenon lens (a lot of europinean cars produsers using it) bulb type is D2S/D2R.


5. apply lens in reflector's body, you have to remember about "horizont line" when applyuing lens.


6. when the horizont and vertical position is right, fix the lens in reflector's body



7. install reflector back in to the headlamp


8. Than we can see ugly cuted reflectors surface, I used a plastic folder to make a cover



9 make a cover and put in