Rear Door Spare Tire Mount

[Marlin]

Here are the pics as requested...the plate is centered on the outside, I just drilled one of the holes crooked, so bolts is actually at a slight angle...I know, pathetic.







As far as the lights, I correct my previous post, the 20 dollar procomp fixtures are not H11s, the H11s are 80 bucks, I apologize, so now the project will be around 200 vice 100:
http://4wheeloutfitters.com/store/in...d&productId=26

The HID kit is the same one I have on my VX for the headlights. No flickering or any of the other problems people whine about. Took about a week from Hong Kong, they will send you whatever color bulb you want. Their customer service was great too.

http://cgi.ebay.com/H1-H3-H4-H7-H11-9004-9006-9007-xenon-hid-conversion-kit_W0QQitemZ200348168964QQcmdZViewItemQQptZLH_Def aultDomain_0?hash=item2ea5ae7304&_trksid=p3286.c0. m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1205|240% 3A1309|301%3A1|293%3A1|294%3A50

[tom4bren]

Marlin,

I finally saw your pix. Good job. It looks like the mounting bracket carries your spare just a tad farther away from the door than mine. I can't even get my hand between the door and the tire to clean or wax or treat the cladding.

BTW, you could just mount your license plate on your bully bar but I like it on my receiver better.

Tom

[Marlin]

Marlin,

I finally saw your pix. Good job. It looks like the mounting bracket carries your spare just a tad farther away from the door than mine. I can't even get my hand between the door and the tire to clean or wax or treat the cladding.

BTW, you could just mount your license plate on your bully bar but I like it on my receiver better.

Tom

Thanks Tom,
I tried to find the deepest bracket I could, so if I go to a larger tire or different offset wheel, I have room to spare...get it.....spare
Anyway, I am happy with the results and I have no indication of deformation of any kind.
I haven't decided what to do with the palte, now that I am making skid plates, I have put it on the back burner. I am gonna try to knock out half a dozen plates this weekend if I can, and then wait until I get some feedback for finishing touches and ship those out. That money will go toward my bumper project and manual hubs. Then the next batch of money will help fund my new trail tires and wheels. I would guess once my bumper is done, that will put me into the medium modded category? I have done so much to it, it is getting hard to keep track.

[Triathlete]

Marlin, make sure to take pics and do a write up on that light conversion!

[Marlin]

Huh, I knew Chris was a Jeeper! He is even driving a strange Jeep Recovery - it must be the latest concept vehicle from Jeep cuz it looks way futuristic and with a name like Recovery it signals the economy! I hope it sells well... I wonder why they put the badge on the window tho.

Damn, can I not get away from you!!!!