Custom Bumper Project

[Marlin]

if you don't want to hear what the planet board says, don't post updates there.

You are right, but I do want to hear what they have to say, they just aren't too friendly about it. I rescind my previous comments about the Planet, my apologies.

[VX1032]

Marlin, I know you are taking as if they are not being too friendly, but they are really looking out for you. They just want to save you time and effort and money with their experience. How you take that advice is up to you, though not everyone is eloquent. You seem to be taking a lot of their advice and really considering some of it, which shows your strengths in learning a new trade. I just hate hearing your remarks, I know they are coming from your frustration at your hard work and their non-approval, but I would hate to see any long term bridges burned. Just remeber, a lot of planet members are VX owners too.

Keep up the work.

[Marlin]

I picked up some new steel yesterday, I got some 1/4" thick angle irons, some 1/8" plate, and some 1//4" plate. I will weld the angle iron on top of the crossbar, then weld the 1/8" plate on the top for the horizontal surface. To pretty it up, I am going back to the diamond deck, I can bend it easily and make it look nice. This thing will be heavy duty to say the least. I may also replace the front part of the skid plate, with some Naval ship deck plate. It is basically 1/8" thick expanded metal, but the ribs are 1" diameter. It holds thousands of pounds of motor and pumps on a ship. I have to think about it though. We shall see. The project will be on hold for a bit, the garage epoxy starts thursday. I am also buying that trailer I brought out to Moab. He is letting me have it for 1200 bucks, sweet!!!!! I just have to spend 400 to get new wheels and tires and get those junk Impala wheels off of it.

I will post up pics soon.

[Triathlete]

I am also buying that trailer I brought out to Moab. He is letting me have it for 1200 bucks, sweet!!!!! I just have to spend 400 to get new wheels and tires and get those junk Impala wheels off of it.

I will post up pics soon.

What? No more bling?

[Marlin]

What? No more bling?

Turns out I am not a big fan of changing tires in the snow...

[Marlin]

Weird, I have posted anything to the thread since the 11th, yet it says I posted this afternoon? It has done that a few times. But there is never a post?

Well, anyway, the garage should be done next weekend. I "back to black"ed my cladding today, took almost half a bottle, good stuff. Gotta see how long it lasts though.

I will be making some mods to the bumper, the sheet metal is coming off, angle iron going on, ,and I figured out how to fill the gap. Gasket rubber, similar to the rubber used for flexible mud flaps. It is easy to work with, will blend in, form fits, and if it gets hot during wheelin, I can easily take it off to give more air flow. bear with me ya'll, its getting there.

[tom4bren]

Maybe Boss Man put a sticky on it to try to keep you on track to getr done.

BTW, 4000 hits on this thread - Impressive.

[circmand]

Weird, I have posted anything to the thread since the 11th, yet it says I posted this afternoon? It has done that a few times. But there is never a post?

Well, anyway, the garage should be done next weekend. I "back to black"ed my cladding today, took almost half a bottle, good stuff. Gotta see how long it lasts though.

I will be making some mods to the bumper, the sheet metal is coming off, angle iron going on, ,and I figured out how to fill the gap. Gasket rubber, similar to the rubber used for flexible mud flaps. It is easy to work with, will blend in, form fits, and if it gets hot during wheelin, I can easily take it off to give more air flow. bear with me ya'll, its getting there.

you posted you were not a fan of changing tires in the snow or triathlete quoting you it is considering the quote as a new post