Well, I cut out light mounts, drilled holes for turn signals. I screwed up and cut the wrong size hole for lights, could have sworn they were 4.5", gotta figure something out now, I think that door seal trim will do the best, it will be flexible, good seal, and still give me room for fudge factor such as aiming and whatnot. I am in the process of putting the bedliner on, it actually goes on pretty good. At 30 bucks a quart, it better be nice.
I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.
Thomas Jefferson
Bart, you crack me up
I see Jonny 5 or Wal-E when I look at the newest pix....
[SIGPIC][/SIGPIC]
I have a Sith sense....I see Darth people...
Wait, it isn't staying gray, when its black it won't be so fugly...wait, you just have to trust me...I also forgot to mention, those pieces aren't mounted yet, they were just sitting on there, they sit a little further back, and once the lights are mounted, that gap around the foglights will be gone, so no more Johnny 5 look. Good reference though...maybe I should mount the turn signals at an angle above them to look like eyebrows.......
You've gone this far, ya might as well make 'em eyebrows
ya, i was gonna say that the grey just doesnt fit... definately needs to be black..
"Do Not Seek Praise. Seek Criticism."
"If You Can't Solve A Problem, It's Because You're Playing By The Rules."
"The Perosn Who Doesn't Make Mistakes Is Unlikely To Make Anything."
-Paul Arden
VX KAT
....the adventure BEGINS ANEW! ...2015......
Remember that life is not measured in the breaths you take, but rather in the moments that take your breath away.
Marlin,
I dunno what to say.
Peace.
Tom
p.s.
I did have to chuckle at Bart and Zues' comments. I'm sorry.
"Through Great Sacrifice..... Great Rewards Will Be Achieved"
Yup...
That just about sums it up.
The scale is wrong ...'just' my opinion!
The aesthetics are 'questionable' ...just my opinion!
And honestly...it aint gonna be better 'black'.
Please...remind me again WHY ya purchased a VX???
Disclaimer...no offense intended...ya want opinion...ya got it!
jo
Last edited by JoFotoz : 09/10/2009 at 10:19 PM
VX.info...PLEASE SUPPORT THIS SITE WITH YOUR VOLUNTARY $20 DONATION...
Absolutely the best $20 you'll spend per year on your VX.
~ ~ > OFF ROAD WHORE <~ ~
[SIGPIC][/SIGPIC]
[QUOTE=Marlin;172264]
I know you're not finished yet, & maybe already aware, but the angles on the ends, where it angles back look different from one side to the other...
.
Ldub, very astute of you, the angles are actually the same, the driver side plate is just an inch longer, so I need to trim that off today. I forgot about the fact that one side of the crossbar is an inch longer than the other. No worries, the angles are the exact same, if you measure the distance from the crease to where the cut begins, or look at it with respect to the turn signals, they match up.
The glory of all this, it is completely removeable, and I would be willing to wager that none of you would be 100% successful at attempting something on this scale on your first try, and I don't mean first try at building your bumper, but first try at welding, cutting steel, fabrication and so on.
It is easy to say "I would make it curved, and match the lines" but in reality, without very specialized equipment, you can't just "curve" 1/4" thick steel. I also did all of this in my garage, on my own dime with my own tools, vice access to tools at work or whatnot. My bumper is more than 5 times as thick as the factory bumper and is essentially bullet proof. I understand that it is not the most aesthetically pleasing (bit of an understatement), but it is my first one, and I cannot begin to tell you how much I have learned doing it. Let me fill in the empty space, get the lights wired up, the skid plate mounted, and it will not be near as bad as you think. I have a vision...when I bought the VX at first, everyone here made fun of how ridiculous it looked, sitting low to the ground, looked like a ballooned up ricer hatchback.
I told them to give me a few months, and now they admit that it looks pretty mean, more like a truck should look. I had a vision of what I wanted, and now it is there. (except the bumper). I also have a vision of how the bumper will turn out...
I, for one, am not beating up on your idea, Chris... just the results thus far. I like the idea of a Road Armor style winch bumper. The thing is... it's best to learn how to walk before you learn how to run. So I don't get why someone with no skills or experience with metal work would take on something this massive, except, of course, to say you were the first to build a bumper. To me, telling people "I bet you couldn't do this your first time out" is like saying "I bet you guys wouldn't have as much success at learning how NOT to do something". But, at the same time nobody has ever said anything negative about your growing skills as we all know you are not done and we all know you are learning as you go; however, your bumper mimics that, and now your VX mimics that, and that is where all the flack is coming from.
Sent from my "two hands on a keyboard"