Results 1 to 11 of 11

Thread: Medium Duty vs Heavy Duty springs

  1. #1
    Member Since
    Oct 2007
    Location
    2001, foxfire red #1096
    Posts
    368
    Thanked: 0

    Thumbs up Medium Duty vs Heavy Duty springs

    What is the difference between these two? is there any difference in handling? 912 springs is my next mod and rocky-roads.com offers both kinds, i do some offroading once in a while. Which are better?
    Tried finding an answer by doing a search but didnt come up with anything
    Thank you!
    ----------------------
    A question that sometimes drives me hazy: am I or are the others crazy?
    Albert Einstein

  2. #2
    Member Since
    Aug 2008
    Location
    2001, PROTON YELLOW, VehiCROSS, 1451
    Posts
    1,955
    Thanked: 0
    Do a forum "search" for a thread by RICKSHAW entitled: "The 913 Experiment"

  3. #3
    Member Since
    Oct 2007
    Location
    2001, foxfire red #1096
    Posts
    368
    Thanked: 0
    i have seen that thread but dont remember seeing anything about the difference between medium duty and heavy duty, let me recheck it again.

  4. #4
    Member Since
    Oct 2007
    Location
    2001, foxfire red #1096
    Posts
    368
    Thanked: 0
    Did check that thread and didnt find an answer other than comparing the 919's super heavy duty springs or something like that. I kinda got that the Heavy duty springs should be stiffer and able to carry more load right?

  5. #5
    Member Since
    Aug 2008
    Location
    2001, PROTON YELLOW, VehiCROSS, 1451
    Posts
    1,955
    Thanked: 0
    Hmmm, Ok. Send a PM to fellow member "MARLIN". If I recall correctly, MARLIN went through a comparison dilema between the different springs available. MARLIN is a straight-shooter, and he'll be upfront with you regarding pros/cons.

  6. #6
    Member Since
    Jun 2004
    Location
    99 Astral Silver VX #1872 + 99 Ironman WIP
    Posts
    10,613
    Thanked: 1

    Lightbulb

    Post #9 should answer your question, but read the entire thread for further clarification...

    http://www.vehicross.info/forums/sho...hlight=OME+912

  7. #7
    Member Since
    Oct 2007
    Location
    2001, foxfire red #1096
    Posts
    368
    Thanked: 0
    Thank you all for your help!
    I just ordered a set of 912's from www.davesport.com
    They didnt give me the option of choosing Medium Duty or Heavy Duty so whatever they send will be fine. Is the same place Rickshaw ordered his from so i think it will be fine

    Thanks again!

    Juan

  8. #8
    Member Since
    Oct 2007
    Location
    2001, foxfire red #1096
    Posts
    368
    Thanked: 0
    Also got the Daystar Spring Spacers - KC09103BK from Amazon.com
    Unfortunatly I am out of the country untill the end of august so i wont get to install anything i bought till then. But i cant wait!

  9. #9
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0
    I got the 919s, they fit perfect, of course, I talked to the folks over at indy4x, the 919s are a tiny bit taller, but they have a much higher weight capacity, so if you plan on hauling stuff or towing, that would be the difference. Not sure if they ride different or not...

    I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.
    Thomas Jefferson

  10. #10
    Member Since
    Nov 2002
    Location
    2001 Dragon #0467
    Posts
    195
    Thanked: 0
    This may help



    OME913

    Free Height: 390 mm., 15.35 in.

    Number of Coils: 9.3

    lbf/in spring rate: 180-300

    Application: (medium Amigo/Rodeo 5door coil spring 98-02)

    ________________________________________________



    OME912

    Free Height: 420 mm., 16.54 in.

    Number of Coils: 10.8

    lbf/in spring rate: 180-300

    Application: (medium load Trooper 92-02)

    ________________________________________________



    OME919

    Free Height: 430 mm., 16.93 in.

    Number of Coils: 10.8

    lbf/in spring rate: 200-280

    Application: (heavy load Trooper 92-02)

    ________________________________________________

    Source: OME 912 vs. 913 post #9



    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>







    Source: ARB Application Guide
    rickshaw
    Original Owner
    2001 Dragon #0467

  11. #11
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0
    Nice post, that is the same info I used in my decision, if it requires more lbf/in to compress the 919 spring, that means it will sit higher under normal load or loaded than the 912 or 913, which equals more lift Add a spacer, and voila, you are that much higher. But that requires that much more torsion bar crank as well. Its just a matter of what you want, and the ultimate reason, the 912s and 913s were a 6-8 week, 919s were in stock shipped the next day

Similar Threads

  1. Replies: 20
    Last Post: 07/12/2012, 03:41 AM
  2. IFS Heavy Duty tie rods & misc. installed
    By Kenny in forum VX Modifications...
    Replies: 6
    Last Post: 10/22/2006, 04:43 PM
  3. Heavy Duty CV Boot?
    By JULIAN911 in forum VX Talk...
    Replies: 5
    Last Post: 10/24/2005, 02:22 PM
  4. Heavy duty brush guard for VX
    By Jorge in forum Austin Robot Technology
    Replies: 14
    Last Post: 05/07/2005, 07:14 AM
  5. Stinkyfab Heavy Duty TieRods
    By StinkBug in forum VX Talk...
    Replies: 17
    Last Post: 01/17/2005, 09:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails