Results 1 to 9 of 9

Thread: Door handle problem

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jan 2009
    Location
    1999 Silver VX, 2021
    Posts
    186
    Thanked: 0

    Door handle problem

    I've got a problem with my driver's door. I starting opening it and I could hear something slipped and the door wouldn't open. I opened the passenger door and was able to open my door from inside.

    I took the door pannel off and found out that the plastic connector came off the handle that is supposed to make that arm that goes from the lock to the handle stay in the handle. I pushed it back in the handle and it clicked so I thought I got it fixed. I put the pannel back on and three days later it came off again. So now I don't have the pannel on at all so that I could quickly put it back on. That's quite annoying.

    Has anyone ever had problems with that and where would I be able to buy a new platic connector like that? I tried to find a Rodeo, Trooper or Amigo on local junk yards but only one of them had a Trooper that was about 1994 and that's it and I'm not sure it's it has the same part.

    Can I order it anywhere?

  2. #2
    Member Since
    Aug 2006
    Location
    1999, Astral, Vehicross, 1619
    Posts
    1,822
    Thanked: 1
    I have had this problem and yes its VERY annoying. Im sure you can get the clip thru the dealer. I used a grommet and a zip tie to fix mine. I was tired of going thru the passenger side and didnt want to wait for parts to get here.

  3. #3
    Member Since
    Sep 2008
    Location
    2000,Kaiser silver,VX,0576
    Posts
    902
    Thanked: 0
    Boy, Mikemol, mine just did the same thing this past MON. Drivers side and all. Call merlin at St Charles isuzu 1-800-727-8066. the part you need is: 897037509-0 (drivers side). i ordered 3, one to fix it now and a couple of spares. i also ordered 2 for the pass. side #897037508-0 , plus I ordered 12 of the door clips ( the things that hold the door panel to the door) #894318803-1. I think the order was like $17.00 total. shipped and to arrive in 5 days...plus I mentioned vehicross forums for a 15% discount (included in the approx.$17.00 total).
    Last edited by handeeman : 09/17/2009 at 01:24 PM
    So I said to myself, I said "Handee"
    and this voice came back and said..
    "He's not in, may we take a message?"

  4. #4
    Member Since
    Nov 2004
    Location
    1999 Ex-Ebony..Fully Line-X'd ..0189...THE "ORW".....matching Line-X'd Trailer made from a written off 2001 Ebony.
    Posts
    4,403
    Thanked: 14
    X2...I did exactly the same..its lasted 2 years so far!

    Quote Originally Posted by CrnCnn View Post
    I used a grommet and a zip tie to fix mine.


    jo
    VX.info...PLEASE SUPPORT THIS SITE WITH YOUR VOLUNTARY $20 DONATION...
    Absolutely the best $20 you'll spend per year on your VX.


    ~ ~ > OFF ROAD WHORE <~ ~
    [SIGPIC][/SIGPIC]

  5. #5
    Member Since
    Jan 2009
    Location
    1999 Silver VX, 2021
    Posts
    186
    Thanked: 0
    Thank you so much, I'll order them too.

  6. #6
    Member Since
    Sep 2008
    Location
    2000,Kaiser silver,VX,0576
    Posts
    902
    Thanked: 0
    One other thing, I was told that one of the reasons this occurs is when your hand slips off the door handle while opening and the handle springs back. So the door handle non slip tape (thread by VCrossfan) prolly helps prevent this from happening.

  7. #7
    Member Since
    Jan 2009
    Location
    1999 Silver VX, 2021
    Posts
    186
    Thanked: 0
    Quote Originally Posted by handeeman View Post
    One other thing, I was told that one of the reasons this occurs is when your hand slips off the door handle while opening and the handle springs back. So the door handle non slip tape (thread by VCrossfan) prolly helps prevent this from happening.
    I'm not sure if slipping has anything to do with it. Mine is just worn out a lot. I just tried to open the door handle and was looking down the glass to see if it's sliding off or not. It took anywhere from 10 to 20 tried for it to slide off the rod and I never let the door handle slip.

  8. #8
    Member Since
    Sep 2008
    Location
    2000,Kaiser silver,VX,0576
    Posts
    902
    Thanked: 0
    Quote Originally Posted by rowhard View Post
    Guess you got it figured out. I wrote a how to on this a couple of years ago. http://www.vehicross.info/modules.ph...warticle&id=22
    Quote Originally Posted by mikemol View Post
    I'm not sure if slipping has anything to do with it. Mine is just worn out a lot. I just tried to open the door handle and was looking down the glass to see if it's sliding off or not. It took anywhere from 10 to 20 tried for it to slide off the rod and I never let the door handle slip.
    Actually, I got the parts numbers from rowhard's how to...Funny thing now I will have to follow his thread to fix it..Thank ya rowhard that's just one of the ways this forum gives back more than it cost to be a site supporter.

    Mikemol, my mechanic buddy is the one that suggested the possible cause for this part to fail was snapping back the handle over the years. As far as I know it's just and old age thing.

  9. #9
    Member Since
    Dec 2005
    Location
    2001, Dragon Green, 1342
    Posts
    2,393
    Thanked: 0
    Quote Originally Posted by mikemol View Post
    I've got a problem with my driver's door. I starting opening it and I could hear something slipped and the door wouldn't open. I opened the passenger door and was able to open my door from inside.
    Guess you got it figured out. I wrote a how to on this a couple of years ago. http://www.vehicross.info/modules.ph...warticle&id=22
    Greetings, Earthling. We come in peace... Never mind "Paris to Dakar", the VehiCROSS looks ready for the Martian desert.

Similar Threads

  1. Door handle not working
    By Anita in forum VX Troubleshooting...
    Replies: 3
    Last Post: 01/22/2016, 09:01 AM
  2. Help w/ replacing Door Handle Pin
    By tysamigo in forum VX Troubleshooting...
    Replies: 15
    Last Post: 05/17/2013, 09:37 AM
  3. Rear door handle
    By braaus in forum VX Modifications...
    Replies: 19
    Last Post: 02/18/2012, 07:28 AM
  4. Door handle????????
    By BigJoe in forum VX Troubleshooting...
    Replies: 2
    Last Post: 12/08/2007, 04:48 PM
  5. Door handle HELP
    By Cyrk in forum VX Troubleshooting...
    Replies: 9
    Last Post: 10/30/2003, 09:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails