Door handle Mod-Prolly not a good idea

[handeeman]

I was thinking how every once in a while your hand slips off the door handle when you try to open it. I know some people have used the grip tape under the handle with success, but I was wanting a better solution. So I thought has any one tried to put a cabinet drawer pull on their door handle ? Like this:Attachment 1190


So using a cordless drill and metal bit like this:Attachment 1193



I drilled a couple of holes in the door handle like this:Attachment 1191


Then attached the cabinet pull like this:Attachment 1192


Not bad huh? I used the silver pulls from Home Depot, $2.39 each.
Wife say's she thinks it looks funny but it's practical.

[circmand]

I was thinking how every once in a while your hand slips off the door handle when you try to open it. I know some people have used the grip tape under the handle with success, but I was wanting a better solution. So I thought has any one tried to put a cabinet drawer pull on their door handle ? Like this:Attachment 1190


So using a cordless drill and metal bit like this:Attachment 1193



I drilled a couple of holes in the door handle like this:Attachment 1191


Then attached the cabinet pull like this:Attachment 1192


Not bad huh? I used the silver pulls from Home Depot, $2.39 each.
Wife say's she thinks it looks funny but it's practical.

to be shot at dawn

[ZEUS]

I wanna see a pic from further away b4 I say anything... pleeeease...

[vt_maverick]

I wanna see a pic from further away b4 I say anything... pleeeease...

+1 - I'll withold the official cry of blasphemy until I've seen the pics. But mounting cabinet hardware on your automobile may be difficult to recover from even if the pics aren't bad.

[Grif]

"handleeman" will never live it down.

[pbkid]

"handleeman" will never live it down.

LOL.

ya, lets see it from farther away handlee

[Hiredgoon]

Is it April first already?

[VCrossfan]

Pleeeeeease tell me this is a joke... If not, YOU KNOW YOUR A REDNECK WHEN....

[Ldub]

Yer jerkin' our chain here...right Handee?...

[don moore]

you know ..his name is "handleeman"...get it...

[LittleBeast]

This is a joke right? Even if I had to use my pinky to open the door I would still never think about seriously doing this one, this cannot be serious.

[tom4bren]

I remember a certain someone on the forum who had a rope instead of an inside door handle. This ain't much worse.

Think of all the great uses that handlee will have in the future as well:

You can hang the transmission fluid bottle from there when you're servicing your tranny.

If you're on a long road trip, you can hang your laundry from there to dry.

You could integrate a can holder so you don't spill your beer inside the VX.


The possibilities are endless.

[Ldub]

I remember a certain someone on the forum who had a rope instead of an inside door handle. This ain't much worse.

What was their username?...J.D. Clampett?...

of all the great uses that handlee will have in the future as well:
If you're on a long road trip, you can hang your laundry from there to dry.

The possibilities are endless.

Moabian granny panties spring to mind for some reason...

[tom4bren]

Moabian granny panties spring to mind for some reason...

That came to mind for me as well but ... that was YOUR story.

[JAMAS]

I remember a certain someone on the forum who had a rope instead of an inside door handle. This ain't much worse.

Think of all the great uses that handlee will have in the future as well:

You can hang the transmission fluid bottle from there when you're servicing your tranny.

If you're on a long road trip, you can hang your laundry from there to dry.

You could integrate a can holder so you don't spill your beer inside the VX.


The possibilities are endless.

It WOULD make a nice towel rack.

Perhaps we are being quick to judge. Let us see a "zoomed out" picture so we can be more comfortable judging you.

Heck....maybe the next step is curtains around the windows instead of tinting......maybe a white picket fence around the bottom......

I kid...I kid....

Keep thinking outside the box. I know that's what EVERYONE here does and we have had some real great ideas surface because of it.