Page 2 of 2 FirstFirst 1 2
Results 16 to 22 of 22

Thread: Easy Task for Most of You

  1. #16
    Member Since
    Sep 2009
    Location
    1999 Astral 1052
    Posts
    59
    Thanked: 0
    Quote Originally Posted by SlowPro48 View Post
    The trim around the CD changer just pulls out. Give it yank - you'll see. Once you remove the trim piece, you'll see the screws you need to remove in order to get the CD changer out. You don't need to remove the "rounded panel" below it - that's just a cover for the powertrain control module.
    SlowPro48 and pbkid what you said is correct. I took a deep breath and started. I removed the ash tray and cig. lighter first then put a little pressure on the back side of the trim where the ash tray came out and it began to come out. Took a little more guts but the whole thing came out and there was the changer with it's four screws holding it in. I removed it and tried everything mentioned on this site to shake the cd's loose but not luck. I then unpluged the changer and brought it inside to work on. I did remove some of the metal plates while still in the car and a couple little pieces of plastic came out - looks like someone had been here before and not done good. I posted pictures on photobucket (can't post pictures here yet) for all of those who are like me and do better with pictures than words (http://s292.photobucket.com/albums/mm37/etnemo/). Want to thank everyone for their input and I have not decided what I will do it the cd is trash (I know parts would be impossible to get).

    nemo

  2. #17
    Member Since
    Apr 2004
    Location
    2000, Ebony, VX, 0370
    Posts
    2,503
    Thanked: 12
    nemo, if you can't get your CD changer fixed and you want to keep the original look, there are a few people here who have sold, or are looking to sell, their old CD changers.
    "The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
    -Douglas Adams, Mostly Harmless

  3. #18
    Member Since
    Sep 2008
    Location
    2000,Kaiser silver,VX,0576
    Posts
    902
    Thanked: 0
    Here's a pic of Nemo's VX . Nice huh ?
    So I said to myself, I said "Handee"
    and this voice came back and said..
    "He's not in, may we take a message?"

  4. #19
    Member Since
    Sep 2009
    Location
    1999 Astral 1052
    Posts
    59
    Thanked: 0
    Quote Originally Posted by handeeman View Post
    Here's a pic of Nemo's VX . Nice huh ?
    Yea and it runs and rides great too.............

  5. #20
    Member Since
    Sep 2009
    Location
    1999 Astral 1052
    Posts
    59
    Thanked: 0
    Quote Originally Posted by MSHardeman View Post
    nemo, if you can't get your CD changer fixed and you want to keep the original look, there are a few people here who have sold, or are looking to sell, their old CD changers.
    MSHardeman, I am going to take it apart (saw post about that here somewhere) and see what has happened then decide. I never have had a cd changer and don't really listen to the radio that much so will see what I find. I figured there might be some for sale since I read some replaced with better units.

  6. #21
    Member Since
    Jun 2002
    Location
    '99
    Posts
    1,158
    Thanked: 0
    This is a least worth a look-
    http://www.oemautosound.com/pc-91-156-isuzu-indash-single-cd-player-1998-to-2003.aspx

    If you Google CDT-107MP3, it looks like that unit is used in Isuzu's and the Honda Passport made by Isuzu, along with Toyota's.

    It still may be a risk, but that's a nice price if it's a simple plug 'n play deal. A single disc player should be more reliable.

    If someone has the guts to give this unit a try, we'd all appreciate it.

    Mark
    Last edited by deermagnet : 10/28/2009 at 07:37 PM

  7. #22
    Member Since
    Sep 2009
    Location
    1999 Astral 1052
    Posts
    59
    Thanked: 0
    Thanks deermagnet, I am not sure what I will do yet. I may put my CB in there or may try a CD changer but since I am retired (dirt poor) I have to get the money before I can get anything else. The wife wants me to get rid of my Sami before I spend any more moeny. Thanks again will keep the site info in case I do replace the changer.

Similar Threads

  1. Easy TOD off switch!!
    By kodiak in forum VX Modifications...
    Replies: 38
    Last Post: 06/04/2009, 11:02 PM
  2. Easy Huh!? Shock Install help...
    By xdfarrx in forum VX Modifications...
    Replies: 4
    Last Post: 07/25/2007, 04:01 PM
  3. Easy Horsepower
    By Joe_Black in forum VX Modifications...
    Replies: 4
    Last Post: 06/24/2004, 02:34 PM
  4. Easy fix for CD changer problem?
    By Heraclid in forum VX Talk...
    Replies: 24
    Last Post: 06/18/2004, 06:07 PM
  5. Go easy on me I'm new!
    By tritonsmoon in forum VX Troubleshooting...
    Replies: 1
    Last Post: 02/18/2003, 04:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails