Results 1 to 15 of 31

Thread: If you plan on an ARB for the rear of your VX...

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jan 2008
    Location
    Formerly 2000 Kaiser #0486
    Posts
    180
    Thanked: 0
    Well the JDM VX's don't have the tod case or bigger engine? so maybe we got the modified? Is there a strength difference between the two then?
    nznsi

  2. #2
    Member Since
    Oct 2004
    Location
    99 Astral VX 1032
    Posts
    202
    Thanked: 0
    Actually, yes, the modified 12 bolt is a stronger axle, but very little, and getting smaller, aftermarket support. Has a bigger ring gear, and I believe it actually has stronger axle shafts, but I am not certain about that.
    Ryan Christiansen

    Trooper Skid Plates, OME 912's, Stric9 Sliders, Load Warrior with extension, Apline sub in rear door, Apline front speakers, Alpine head unit, Definity Dakota MT 285/75 R16, Aussie Lockers Front and Rear, 4.77 gears and Warn Manual Hubs.http://picasaweb.google.com/RyanVehiX

Similar Threads

  1. CV Boot Replacement Plan - Correct me where I am wrong
    By JAMAS in forum VX Troubleshooting...
    Replies: 30
    Last Post: 05/06/2014, 12:39 PM
  2. Front and rear (rear) driveshaft joints are different?
    By 89Vette in forum VX Troubleshooting...
    Replies: 26
    Last Post: 10/05/2013, 09:02 PM
  3. Should I expect and plan for the worst?
    By JHarris1385 in forum VX Troubleshooting...
    Replies: 10
    Last Post: 04/30/2013, 11:08 AM
  4. Researched, and now have a plan
    By Polie in forum VX Talk...
    Replies: 8
    Last Post: 12/14/2009, 11:16 AM
  5. Perfect Plan... from Robin Williams...
    By coachreed in forum VX Talk...
    Replies: 8
    Last Post: 05/05/2003, 11:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails