First of all, don't kill me, I swear I searched and read half of the forum looking for an answer.

I'm looking at a tire size that I haven't seen discussed along with a wheel bs/offset combo that I haven't seen used either. My question is will this wheel/tire combo fit without a lift (excluding cranking the torsion bars to level). If they will not fit without lifting, will a 1-1.5" lift do the trick? I'm ok with some minor trimming of the cladding and a little bfh work inside the wheel wells.

Also, as an afterthought, would these tires fit the stock 16x7 wheel with minimal drama?

So here are the potential/proposed items in the combo...

Wheels: Eagle Alloy Series 137 in Black w/polished lip
16x8
4.625" backspacing
+6mm offset
6 on 5.5 lug pattern



Tires: Yokohama Geolander A/T-S
275/70R16



"Lift": Daystar KC09102BK or KC09103BK
1" or 1.5" spring spacers