Results 1 to 10 of 10

Thread: Is this compatible and worth it?

  1. #1
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0

    Is this compatible and worth it?

    I just came across this, should I run and get it? Pretty sure it fits?

    http://charleston.craigslist.org/pts/1531221798.html

    I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.
    Thomas Jefferson

  2. #2
    Member Since
    Jan 2008
    Location
    Formerly 2000 Kaiser #0486
    Posts
    180
    Thanked: 0
    Wasn't the axiom Direct injection at one point or something? Not sure if that'd make any difference but something to look into more and consider. I guess if ya got the money might as well pick it up and you could always resell it or even trade for one that does fit down the road.
    nznsi

  3. #3
    Member Since
    Apr 2008
    Location
    2000 Foxfire Red Mica, 0555 (RIP) & 0717
    Posts
    6,229
    Thanked: 3
    2002 is just fine - iamironman put a 2002 in his VX, and Axiom's didn't get DI until 2004.

  4. #4
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0
    Gonna call tomorrow and go get it, the sensors alone should be worth that much. Try for $75

  5. #5
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    Worst that could happen is it don't work and you put it up for resale to an Axiom owner (on the Planet).
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  6. #6
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0
    It will be mine tomorrow and I will clean it up. Never know when the VX is gonna puke something up. I will also have an extra tranny soon, my VX comes out of the shop sometime next week, and I get to keep the original tranny, no core turn in. So I can have it rebuilt at my leisure as needed.

  7. #7
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    Better yet, rebuild it yourself and learn to do it...if you mess up, what are you out?

  8. #8
    Member Since
    Jun 2002
    Location
    2001, Proton Yellow, #0580
    Posts
    1,887
    Thanked: 5
    I ended up paying about $50 for mine (came from a slightly earlier model Trooper - a 3.2 I think - so I couldn't use it - the opening for the intake is smaller) - that one should be fine though. You're basically buying a used MAF and getting the extra fuel rail, 6 injectors and FPR for free (price an injector and you'll see you're doing well) - not to mention the extra manifold itself...

    -- John
    John Eaton
    Original Owner
    2001 Proton Yellow #580
    Atlanta GA

    http://wildtoys.com/vehicross/
    http://vehicross.blogspot.com/

    "Metaphors be with you"

  9. #9
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0
    Quote Originally Posted by Triathlete View Post
    Better yet, rebuild it yourself and learn to do it...if you mess up, what are you out?
    That is possible, but the rebuild kit is not free, and if I need a tranny and I screw this one up, now I need to buy a new one again, as well as the labor for install and removal.

    Quote Originally Posted by johnnyapollo View Post
    I ended up paying about $50 for mine (came from a slightly earlier model Trooper - a 3.2 I think - so I couldn't use it - the opening for the intake is smaller) - that one should be fine though. You're basically buying a used MAF and getting the extra fuel rail, 6 injectors and FPR for free (price an injector and you'll see you're doing well) - not to mention the extra manifold itself...

    That is what I was thinking, I will let you guys know when I pick it up, the lister hasn't responded as of yet. I asked if he had any other parts off the axiom. It would be nice to get some other stuff, starter, AC compressor (I think is the same as the trooper, so I know how to work that out), alternator and so on.
    -- John

  10. #10
    Member Since
    May 2009
    Location
    1999 Ebony Black/Red
    Posts
    145
    Thanked: 0
    im about 40% done with my engine overhaul (spunned bearing as well) - if anybody interested, I could sell the whole bklown engine instead of taking it to scrap metal. and 40% complete hopefully will turn to 100% by monday morning

Similar Threads

  1. Power Mirrors JDM vs USA compatible?
    By Jheyson VX in forum VX Talk...
    Replies: 8
    Last Post: 10/02/2014, 10:25 PM
  2. Replies: 3
    Last Post: 01/02/2014, 09:11 PM
  3. What is my rig worth?????
    By jamessmith in forum VX Talk...
    Replies: 12
    Last Post: 03/05/2012, 08:08 AM
  4. VX compatible drivers side half haft
    By MSHardeman in forum VX Troubleshooting...
    Replies: 18
    Last Post: 10/21/2010, 03:55 PM
  5. What's it worth
    By smcneal in forum VX Talk...
    Replies: 1
    Last Post: 09/02/2003, 11:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails