factory wheel question

[etlsport]

havent had any luck finding this searching.. anyone have any idea what the stock 18's weigh?

I have a chance to get a set of new 18's for a great price so im thinking about it.. but the weight seems high at 29 lbs per wheel.. prob not a big deal in the scheme of things with oversized tires too but mostly curiosity at this point

[navistar]

I have a set of four of the 18s. Three weighted in at 28.0 lbs and one weighted 28.2 lbs. All had a small number of balancing weights attached. I used a digital scale with unknown accuracy.

Navi

[etlsport]

thanks navistar! i ordered my wheels today... im pumped! 392 shipped to my door!

[Mile High VX]

Very nice...

[vt_maverick]

Very nice...

^ +1

[Scott Harness]

Are those wheels heavier or lighter than stock?

[VX KAT]

thanks navistar! i ordered my wheels today... im pumped! 392 shipped to my door!

WOW!! That's an amazing wheel at an price! What wheel are they and where'd ya get 'em or does it involve your Sears connection?

[etlsport]

they are about 1 lb heavier than stock.. so no biggie.. they are 18x8.5 w/ a 4.75" backspacing so they are gonna stick out a tad, should be about the same as wormgod and kenny's enkie's.. they are 89 a piece in chrome or 79 a piece in flat black w/ machined face on www.tirerack.com just put the VX in as your vehicle (may have to be a 2001, not sure) but then i just sorted price low to high and they are the first two..

they are Granite Alloy GA5

[Scott Harness]

they are about 1 lb heavier than stock.. so no biggie.. they are 18x8.5 w/ a 4.75" backspacing so they are gonna stick out a tad, should be about the same as wormgod and kenny's enkie's.. they are 89 a piece in chrome or 79 a piece in flat black w/ machined face on www.tirerack.com just put the VX in as your vehicle (may have to be a 2001, not sure) but then i just sorted price low to high and they are the first two..

they are Granite Alloy GA5

NICE!!!

[circmand]

they are about 1 lb heavier than stock.. so no biggie.. they are 18x8.5 w/ a 4.75" backspacing so they are gonna stick out a tad, should be about the same as wormgod and kenny's enkie's.. they are 89 a piece in chrome or 79 a piece in flat black w/ machined face on www.tirerack.com just put the VX in as your vehicle (may have to be a 2001, not sure) but then i just sorted price low to high and they are the first two..

they are Granite Alloy GA5

I got the flat black and machined I wanted to avoid peeling chrome and I love the look even better

[slutty22]

cant wait to see those mounted on the VX

[etlsport]

they arrived today sadly i have class tonight, but i do work tomorrow, so the first chance i get that we slow down i will be mounting them.. look for pics tomorrow night or sunday


anyone have a photo of the trimming needed for the rear of the front well? i know gary had to do it, this is pretty much the same wheel/tire combo (as far as size) and im not lifted nor do i really want to lift if i can avoid it

also.. can i interest anybody in a set of 5 factory wheels in great shape (minus the peeling on the inner wheel, but not where tires mount or on the face)

[circmand]

they arrived today sadly i have class tonight, but i do work tomorrow, so the first chance i get that we slow down i will be mounting them.. look for pics tomorrow night or sunday


anyone have a photo of the trimming needed for the rear of the front well? i know gary had to do it, this is pretty much the same wheel/tire combo (as far as size) and im not lifted nor do i really want to lift if i can avoid it

also.. can i interest anybody in a set of 5 factory wheels in great shape (minus the peeling on the inner wheel, but not where tires mount or on the face)

I did not require any trimming and my VX is not lifted at all.

[etlsport]

I did not require any trimming and my VX is not lifted at all.

what size tires are you running? I am running 286/60/18s

[etlsport]

mounted them... the offset is more than i was anticipating.. had to cut a good chunk off the front of the wheel well and looks like i will have to cut the back of the well too.. any tips on where/how to cut it?

thinking may just do a 1" coil spacer and crank the torsion bars to help too