I thought the Rodeo clutch pedal bolt-up was common knowledge...LOL
I tried a Napa Clutch set and a Auto Zone (LUK brand)...
The Disks are OK, but the preasure plates are machined incorrectly....
neither was made well.and I had an (very used) OEM Trooper clutch still attached to the Flywheel I bought, so I could compare side by side...OEM quality to aftermarket JUNK!!!
I am sure that there IS a decent aftermarket setup somewhere out there, I just didnt want to buy anymore clutch sets (and return them the next day) Plus those were the only ones readily available W/O taking an even bigger gamble by ordering another aftermarket....
There is a way to use the aftermarket preasure plate...BUT ONLY IF you already have an OEM trooper preasure plate...,On the OEM, it IS possble to dis-assemble the inner portion of the preasure plate and re-install this part on the aftermarket preasure plate... basicaly replacing the part that was made TOO big with the OEM one....
There are ALOT of different trannys that use this input shaft...SO.... you CAN find a variety of DISKs that have the correct fit... (this should help the V-8 swaps)
Preasure plates might be a bit trickier, though....
Reply With Quote
! ! !
Originally Posted by Hotsauce
