Results 1 to 15 of 90

Thread: ATTN!!!! 5 SPEED SWAP W/TOD DONE!

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Apr 2010
    Location
    1999, Astral Silver, Vehicross, #1209
    Posts
    1,673
    Thanked: 0
    I would think the rodeo one would work. The bellhousing and flywheel is the same so you could use an MUA5 from say a 98' Rodeo and delete TOD and get some Tera-Low's. I also don't see why the 93-97's wouldn't work as they also use the same flywheel. There is a guy with a turbocharged pup' running a 2wd MUA5 putting down over 300hp at the tires, so it should be able to hold it. The AR5 is rated at 260 ft/lbs but they also come in the Solstice and the base Mallet Solstice with the stock LS2 conversion retains the AR5 transmission, so it should be able to handle anything the 3.5 can throw at it unless your gonna order parts from Australia and boost the pee out of it! I talked to Mallet about the AR5 in the past and they said with 400hp/400ft/lbs from the LS2 on nice street tirres they never ran into any issues but weren't sure how well it would handle sticky tires and launching at the track. For our use and power even with a blower I think we would be fine. Nice swap! I'm thinking of swapping to an MUA5 later on, but most likely with an engine swap unless I can find a supercharger.
    Last edited by RamAirZ : 04/16/2010 at 12:08 AM

  2. #2
    Member Since
    Dec 2004
    Location
    1999, Black, Vehicross, 1984
    Posts
    243
    Thanked: 0



    Have we been trolled?

Similar Threads

  1. 5-Speed Swap Info
    By twistedsymphony in forum VX Modifications...
    Replies: 44
    Last Post: 08/22/2019, 10:39 AM
  2. VT_Maverick's 5 Speed Swap
    By Buffy in forum VX Talk...
    Replies: 258
    Last Post: 01/09/2016, 02:45 PM
  3. Attn: Aussie and NZ VX owners
    By AussieVX in forum Japanese Domestic Model (JDM) VXs
    Replies: 6
    Last Post: 06/25/2012, 06:18 AM
  4. Attn: thedutchguy
    By mbeach in forum VX Troubleshooting...
    Replies: 5
    Last Post: 12/20/2005, 10:55 AM
  5. ATTN. Lifted VXs....
    By BigMeatVX in forum VX Talk...
    Replies: 7
    Last Post: 07/31/2003, 09:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails