dumb ? but will that work with the tracks i'm thinking about ordering
website...... http://www.americantracktruck.com/in...page=sno-truck
VXer
dumb ? but will that work with the tracks i'm thinking about ordering
website...... http://www.americantracktruck.com/in...page=sno-truck
Super VXer
Did you gut the inside of the fender and trim the cladding?
I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.
Thomas Jefferson
Super VXer
Any thoughts on a dash controlled super flexy IFS?
'01 Kaiser SC'ed VX #0867
Super VXer
It should work with those...Originally Posted by USMCvxOFFROAD
Super VXer
YES!!! Hopefully we will see this produced by a large automaker in the future...
.Remember when just a few years back, a few folks were cutting the front swaybar on jeeps and welding on splines and a coupler, contolled with a cable...badda-bing NOW JEEP OFFERS THIS FROM THE FACTORY ON AT LEAST TWO MODELS....push-button swaybar disconnect....
Super VXer
Yep, long ago I tore out all the inner plastic fenders...and smacked all the high points down with a BIG sledge hammer...opened it up....beat the firewall back about 1"
Trimmed the cladding 1" around the radius as well
Super VXer
Interesting! I met the guy who invented the Revolver shackles and I figured he had made a bunch of money off of the patent sell to Teraflex. When I asked him about it he said you really don't get that much money from it. What is your stance? Have you floated the idea around to a bunch of places, come up with some sort of cost per unit sell or something?YES!!! Hopefully we will see this produced by a large automaker in the future...
Sent from my "two hands on a keyboard"
Super VXer
I dont expect to get rich off these....if thats what your askin
Who knows what the future holds, though....
Super VXer
I was referring to a dash-mounted super flexy IFS controller for the VX, not looking to buy a 2014 Jeep. I've got to think something could be substituted for the removable pin?
Super VXer
Those vids are awesome!
1999 Isuzu Vehicross-#1209- lots of mods - gone
1995 Honda Passport: Lifted, Locked, 34x10.50's, just a few things..-Click for build thread
Super VXer
I think the thing you're looking for in that case is a solenoid. You could also use a cable or push rod to make it lever actuated. An air or hydraulic cylinder would also work but require a little more work. I'd stick with the solenoid. You would probably have to taper the pin too so it would engage smoothly. How hard is it to get out and pull a pin though? Seems like for as much as you'd use this, you could pull a pin out 50 times and it would take just as long as installing a system like that once, not to mention cost, complexity, and reliability.I was referring to a dash-mounted super flexy IFS controller for the VX, not looking to buy a 2014 Jeep. I've got to think something could be substituted for the removable pin?
The reasonable man adapts himself to the world; the unreasonable man persists in trying to adapt the world to himself. Therefore all progress depends on me.
Super VXer
I thought about a solenoid, but I didn't know if you had to move that yolk back and forth in order to get the pin in.
Super VXer
I have an idea, go to Home Depot, yell "Uno", put a harness under the VX, and voila, knock once to engage, knock twice to disengage.
Super VXer
Good idea, but might have clearance issues.
Last edited by phines : 05/25/2011 at 08:53 PM
Super VXer
Unless you have skid plates. Obviously I've never installed this kit on my VX, but I would think it would be difficult to pull (and probably even harder to replace) the pin without removing the plate. If that's the only way to do it, then it kind of defeats the point of an easy to use pin.
Posting Permissions
Reply With Quote
