Page 1 of 6 1 2 3 4 5 ... LastLast
Results 1 to 15 of 86

Thread: Offset from Hell saved the VX ...

  1. #1
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0

    Offset from Hell saved the VX ...

    ... but she won't be on the road for a while.

    Traveling up I95 this morning, towing an empty utility trailer, the cars in front of me came to a hard stop. I LEEEEANED on the brakes but with the trailer pushing me, I wasn't gonna stop in time.

    I started to head for the shoulder but the Ford Escape in front of me had the same idea. As soon as she realized that she would be able to stop in time, she stayed in her lane & I headed for the shoulder. All this happened in about 0.587 seconds. My front drivers side tire hit her rear bumper and rode up the quarter panel ... ever so gently diflecting me further towards the shoulder. But now I was on 2 wheels. A nice arc sent me safely around the Ford but I came to rest with the front driver's tire resting about 1 1/2 feet off the ground on the side of a Dodge Van.

    What a ride!!!

    Hope I never do THAT again!!!

    Anyway, after the State Trooper took his pix, he asked me to kindly remove my VX from the side of the van. I obligingly did so but when the tires were all on the ground again, it was plainly evident that something was amiss. The front tires were pointing 2 different directions.

    The good news is that everyone was OK. The bad news is that I made the news (Wifey called to tell me that the radio was reporting a 7 mile backup).

    I don't have any idea what the extent of the damage is yet but I'll keep you posted. As soon as I figger out how to get the pix on my phone downloaded to my 'puter, I'll post them.

    Tom

    Pix are on page 3 of this thread: http://www.vehicross.info/forums/sho...4&postcount=39
    Last edited by tom4bren : 06/01/2010 at 08:17 AM
    [SIGPIC][/SIGPIC]

    Put a smiley after you say that Bub.

  2. #2
    Member Since
    Dec 2008
    Location
    Former owner 2001, Foxfire Red, #0663
    Posts
    7,311
    Thanked: 33
    I just KNEW that offset from hell was a great idea!! YAH!!!!!!!!!!
    Glad it went down THIS way, and not the other many baddddddd ways it could have & yer all OK!
    VX KAT
    ....the adventure BEGINS ANEW! ...2015......
    Remember that life is not measured in the breaths you take, but rather in the moments that take your breath away.

  3. #3
    Member Since
    Apr 2008
    Location
    2000 Foxfire Red Mica, 0555 (RIP) & 0717
    Posts
    6,229
    Thanked: 3
    Dude that's terrible!!! So sorry to hear about it, definitely keep us posted on the damages, and let me know if there's anything you need my help in hunting down.

  4. #4
    Member Since
    Jun 2002
    Location
    '99
    Posts
    1,158
    Thanked: 0
    I'm glad you're okay, Tom. It'll get fixed and you'll be back on the road in no time. Stay off I-95!

    Mark

  5. #5
    Member Since
    Oct 2004
    Location
    99 Victory White Ironman 0685
    Posts
    1,579
    Thanked: 0
    Good driving!! glad everyone is okay.
    [SIGPIC][/SIGPIC]
    Chi Dog...Dog is my Co-pilot
    Onward thru the fog
    Leave it BETTER than you found it!

  6. #6
    Member Since
    Apr 2004
    Location
    2000, Ebony, VX, 0370
    Posts
    2,503
    Thanked: 12
    Tom, glad to hear that everyone is OK, and the VX is in relatively good shape. Sounds like you might have bent, or snapped, a tie rod. Easy fix....heck, Zeus did it on the trails in Moab.

    Way to "monster truck" it.
    "The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
    -Douglas Adams, Mostly Harmless

  7. #7
    Member Since
    Dec 2008
    Location
    Former owner 2001, Foxfire Red, #0663
    Posts
    7,311
    Thanked: 33
    Quote Originally Posted by vt_maverick View Post
    Dude that's terrible!!! So sorry to hear about it, definitely keep us posted on the damages, and let me know if there's anything you need my help in hunting down.
    Oh yeah, that's right, Tom. Mav is "just a guy who knows how to get stuff" and I'm his jr.apprentice! Yes, grasshopper, this is how you find VX parts....

  8. #8
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    Glad all ended well (somewhat anyways)! May be time to upgrade to indy 4x heavy duty tie rods...if I recall they are pretty close in price to new stock ones.
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  9. #9
    Member Since
    Apr 2010
    Location
    1999, Astral Silver, Vehicross, #1209
    Posts
    1,673
    Thanked: 0
    Ya I'm ordering a set this week, keep my stockers as spares. Like I said in the hitch thread, just glad your ok and the VX is ok. Also I can't lie, I can't wait to see your VX parked on top of a van lol. You could use it as a sig pic! Minivan<VX
    1999 Isuzu Vehicross-#1209- lots of mods - gone
    1995 Honda Passport: Lifted, Locked, 34x10.50's, just a few things..-Click for build thread

  10. #10
    Member Since
    Nov 2009
    Location
    2001Proton 1432, ex 2001 Dragon Green Mica 0168 (RIP May 2017)
    Posts
    3,590
    Thanked: 31
    Glad everyone is fine Tom.

    Only a 7 mile back up? Dude, you can do better than that...

    If the damage is more that just the tie rod you might grab that VX in Des Moines for $2K that needs a motor...just sayin.
    Live, Love, Forgive and Never Give Up

  11. #11
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    Quote Originally Posted by Mile High VX View Post
    If the damage is more that just the tie rod you might grab that VX in Des Moines for $2K that needs a motor...just sayin.
    HMMM!!!! USAA, I have a DEAL for you!!!


    Thanks all. The shakes are kinda subsiding now.

    Gotta go home & try to get the Eclipse fixded so I can get to work in the morning (still overheating ... Bye Bye thermostat).

  12. #12
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    phew Tom be careful out there! glad youre alright and sounds like the only damage to the VX was easily replaceable stuff (and not body)

    let me know if I can do anything to help get the ol girl back on the road!


    "Engineers believe if it ain't broke, it doesn't have enough features yet"

  13. #13
    Member Since
    Dec 2005
    Location
    Former Owner of 'ZEUS' aka 1031
    Posts
    3,185
    Thanked: 1
    Tom, are you sure it wasn't the offset from Hell that kept you from braking in time? Wait, I'm not RiffRaff! I bet if your VX wasn't yellow you wouldn't have been going as fast and you could have stopped. I do believe I have an extra tie rod thanks to Ascinder so shoot me a PM if you think you need a driver's side replacement - it's yours for the cost of shipping if you want it!

    Now... if we are waiting for you to figure out how to work with images we may never see them.
    Sent from my "two hands on a keyboard"

  14. #14
    Member Since
    Feb 2009
    Location
    1999,silver, 1516
    Posts
    905
    Thanked: 0
    Glad to hear no one was injured.

  15. #15
    Member Since
    Nov 2008
    Location
    1999,Astral Silver,VX,1238
    Posts
    269
    Thanked: 0
    Tom, 2 things:

    #1: Glad to hear that you are fine. A little shaken up, but good none the less.

    #2: Those pics are going to be awesome! Can't wait to see them.

    Congratulations on making the news. Good thing you weren't transporting any deactivated landmines this morning! You would have been the lead story.

Similar Threads

  1. offset question
    By vxfocus in forum Wheels and Tires
    Replies: 7
    Last Post: 01/14/2015, 09:15 PM
  2. Saved Again !!!!!!
    By JoFotoz in forum VX Talk...
    Replies: 19
    Last Post: 07/19/2008, 10:42 AM
  3. Ok, what the hell is this?
    By kodiak in forum VX Talk...
    Replies: 24
    Last Post: 04/17/2008, 04:03 AM
  4. Offset
    By CrnCnn in forum VX Modifications...
    Replies: 2
    Last Post: 03/20/2007, 07:51 PM
  5. What's an offset?
    By Medman in forum VX Talk...
    Replies: 5
    Last Post: 06/26/2004, 08:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails