Quote Originally Posted by Riff Raff View Post
B. 295/45R20 (30.5" O.D./39 lbs)
These are very wide at 295 series width, and will likely rub which will require a tad bit of cladding trim. However, they will look totally bad-@ss once fitted on the VX and give the VX a much wider, meaner stance. If you are willing to trim a little bit of the inner cladding, then this would be my recommendation.
I would strongly recommend against a 295 width on that particular rim. The offset is "0" which means the inside of your wheel will sit 38mm out farther than stock. Add onto that an additional 50mm of section width over OEM tires, and you're going to have a MUCH larger swing arc, therefore requiring signficant trimming. I'm only running 265 width tires but because my offset is 40mm wider than stock, I've had to do at least as much trimming as those running 285's on stock rims. If you're trying to lean more towards sport than offroad, chopping up your cladding to fit tires that will likely stick out several inches from the body would (IMHO) look more ricey than sporty.

Riff's Option A is almost certainly a better choice.