Results 1 to 15 of 17

Thread: Spare tire mod

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Mar 2007
    Location
    2001 black vehicross 1190
    Posts
    339
    Thanked: 0

    Spare tire mod

    I removed the back seat months ago because I needed carrying capacity and I rarely have more than wifey riding with me so the back seat seemed unnecessary. I haven't carried the OEM spare tire for a very long time either and I plan to install a subwoofer and amplifier in the spare tire area in the very near future. I run oversized tires, Falken ZIEX S/TZ P275/70R16 on 8-inch rims. These tires have a diameter of 31.5 inches. The VX OEM spare tire has a diameter of 28.5 inches. I realized that if I ever had a catastrophic blowout it might reek havoc on the TOD if I had to use the OEM spare so I really needed to have another Falken tire as my spare. I decided that carrying a spare tire, and one that's same sized, was a good idea. But where and how? I don't like the looks of carrying it on the roof or attaching it, somehow, to the back of the truck.

    Solution: I saw a 1997 (I think) Rodeo at the local Pick 'n' Pull. It had the spare tire mount attached on the outside of the back door. I got the mount and measured it for fitment in the back of the VX. I fabricated some mounting brackets that fit flat on the floor and bolt up nicely to the mount. The floor is corrugated so it's best not to just bolt through it without a bracket. I had the mount sandblasted and powder coated in gloss black. I positioned the mount so that when the tire is mounted to it the front seats can be in the full back position and reclined without touching the tire. There is still room to conveniently stow things immediately behind the seats and plenty of storage room at the back. I cut a 22 inch diameter circular piece of .125 inch thick Masonite to fit horizontally on top of the tire and got a tire cover off Ebay. I also got a roll of rubber truck bed liner from J. C. Whitney and made a mat for the back.

    If you decide to do this make sure that you find a Rodeo tire mount that fits a mostly flat rear door. Some mounts seem to be contoured to a more rounded shape. That wouldn't work well on the flat floor.

    This is the powder coated spare tire mount off a Rodeo:


    These are the 2-piece mounting brackets bolted to the floor:


    This is the rubber truck bed liner from J. C. Whitney:


    This is the spare tire mount bolted to the floor:


    This is the tire bolted to the mount:


    View of finished installation:


    Another view of the finished installation:



  2. #2
    Member Since
    Dec 2005
    Location
    2001, Dragon Green, 1342
    Posts
    2,393
    Thanked: 0
    You might take a look at what I did, will give you more storage space. http://vehicross.info/forums/showthread.php?t=18343
    Greetings, Earthling. We come in peace... Never mind "Paris to Dakar", the VehiCROSS looks ready for the Martian desert.

  3. #3
    Member Since
    Jul 2004
    Location
    1999/black/VX/black
    Posts
    808
    Thanked: 0

    Thumbs up

    Looks good! I like it

  4. #4
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    well done, ive been toying with this idea for a while now.. been trying to figure out how to do a mix between what you did with the mount and rowhards space saving design.


    "Engineers believe if it ain't broke, it doesn't have enough features yet"

  5. #5
    Member Since
    Mar 2007
    Location
    2001 black vehicross 1190
    Posts
    339
    Thanked: 0
    Quote Originally Posted by rowhard View Post
    You might take a look at what I did, will give you more storage space. http://vehicross.info/forums/showthread.php?t=18343
    I did explore the vertical mount concept but it blocks the already limited view to the rear. For stability and good anchorage (in case I am in an accident) I opted for horizontal with dual 1/4" aluminum brackets, 4 good sized bolts and double washers. It's not going to go flying around the inside after an impact. Also I just like the sporty look and aesthetic symmetry of the tire mounted this way. And, I can unmount the tire and remove the tire mount from the floor in about 2 minutes.

  6. #6
    Member Since
    Dec 2005
    Location
    2001, Dragon Green, 1342
    Posts
    2,393
    Thanked: 0
    Quote Originally Posted by navistar View Post
    I did explore the vertical mount concept but it blocks the already limited view to the rear. For stability and good anchorage (in case I am in an accident) I opted for horizontal with dual 1/4" aluminum brackets, 4 good sized bolts and double washers. It's not going to go flying around the inside after an impact. Also I just like the sporty look and aesthetic symmetry of the tire mounted this way. And, I can unmount the tire and remove the tire mount from the floor in about 2 minutes.
    Actually, there is very little impact

  7. #7
    Member Since
    Aug 2008
    Location
    2001, PROTON YELLOW, VehiCROSS, 1451
    Posts
    1,955
    Thanked: 0
    Quote Originally Posted by rowhard View Post
    You might take a look at what I did, will give you more storage space. http://vehicross.info/forums/showthread.php?t=18343
    x2. For permanently mounting a full-size spare within the interior without sacrificing valuable cargo space "ROWHARDs" design rules!!!

  8. #8
    Member Since
    Jan 2009
    Location
    97 Jap Import, Black BEAST
    Posts
    1,515
    Thanked: 0
    looks awsome mate!
    Speed Thrills, Boredom Kills!!

  9. #9
    Member Since
    Apr 2008
    Location
    2000 Foxfire Red Mica, 0555 (RIP) & 0717
    Posts
    6,229
    Thanked: 3
    Nice job! I don't see this as being any more or less convenient than rowhard's "space-saving" design; both have advantages and disadvantages. rowhard's design preserves more horizontal floor space but does so at the cost of vertical space that might have been used for carrying wider/taller cargo that needs to lean over sideways to fit. Navistar's design eats more horizontal floor space but let's you use the full width of the cargo space that remains. There's no question that rowhard's solution cuts visibility (just look at the pics) but whatever is lost can be regained with $3 blind-spot mirrors. Both are great alternatives and honestly I don't know which one I'd choose.

    Pics for comparison:


  10. #10
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    I like your ingenuity fellers. I just gots one question:

    Does the spare tire smell EVER go away???
    [SIGPIC][/SIGPIC]

    Put a smiley after you say that Bub.

  11. #11
    Member Since
    Dec 2008
    Location
    Former owner 2001, Foxfire Red, #0663
    Posts
    7,311
    Thanked: 33
    That's looks great! If you feel like making more...I'll be the first to buy one!
    I was thinking of putting mine there and then using ratchet straps in an "X" pattern to secure it to each of those silver tie down points back there. Bet yours is stronger, being attached to the actual metal floor.
    VX KAT
    ....the adventure BEGINS ANEW! ...2015......
    Remember that life is not measured in the breaths you take, but rather in the moments that take your breath away.

  12. #12
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    KAT,

    You may be able to just use the parts that mounted the donut in the rear door. I'll have to look at the pieces tonight and see if it'll work.

    Tom

  13. #13
    Member Since
    Mar 2010
    Location
    '01 Kaiser Gray VX#0867
    Posts
    354
    Thanked: 0
    I'm surprised that the vertical designs have all been mounted on the passenger side. If mounted on the driver's side, visibility would be a non-issue.
    '01 Kaiser SC'ed VX #0867

  14. #14
    Member Since
    May 2009
    Location
    2001 Kaiser 0845
    Posts
    122
    Thanked: 0
    I think they mean that you wouldn't have to open the rear door all the way if the tire is on passenger side. If you have other stuff in trunk it's easier to remove the spare full size tire if it's on the passenger side as well.

  15. #15
    Member Since
    Aug 2008
    Location
    2001, PROTON YELLOW, VehiCROSS, 1451
    Posts
    1,955
    Thanked: 0
    I'm not one for carrying any FS spare unless venturing off-road to the extreme outback wilderness. However; ROWHARD's design of vertically mounting the FS spare in the right-rear corner offers a somewhat balanced weight distribution with the driver, as it is diagonally opposed with the driver across the vehicle's frame. Mounting the FS spare in the left-rear corner would be improper weight distribution in relation to the driver's own personal weight. Afterall; the driver is a constant weight factor in the equation, but a passenger is an optional weight factor.

    In regards to a right-rear located vertical FS spare blocking rear blind spot visibility, that's an invalid point IMHO. While driving my VX the other day, I intentionally tried to look over my right shoulder out the right-rear 3rd quarter window to check traffic for a possible lane-change. What an extremely dangerous and wasted effort that was-- the little 3rd quarter window of the VX is absolutely worthless for checking traffic at speed, as the VX travels too far down the road when trying to determine a valid safety zone for a safe lane-change. The $3 convex spot mirror on my passenger-side outside mirror is a far more safer lane-change traffic check device; and requires far less eye-n-head movement, thereby maintaining quick traffic reference back thru front windshield. The inherent cacoon-tunnel design of the VX cargo area makes rear window visibility virtually worthless, and the VX should be treated the exact same as driving a Panel Delivery Truck. Just my 2-cents.


Similar Threads

  1. Use of spare place of spare tire...
    By uncle_asa in forum General Tips...
    Replies: 15
    Last Post: 08/10/2009, 11:31 AM
  2. Spare tire vs Tire Sealer?
    By Petos in forum VX Talk...
    Replies: 15
    Last Post: 04/25/2008, 08:02 AM
  3. TOD vs. Spare tire
    By Offroad vx in forum VX Troubleshooting...
    Replies: 2
    Last Post: 07/30/2006, 08:33 AM
  4. problem after use of spare tire
    By cyan328 in forum VX Troubleshooting...
    Replies: 15
    Last Post: 02/04/2006, 10:52 AM
  5. Spare Tire
    By ScubaSteve in forum VX Talk...
    Replies: 6
    Last Post: 01/15/2004, 01:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails