Results 1 to 13 of 13

Thread: Removing a cladding dent....

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jan 2009
    Location
    97 Jap Import, Black BEAST
    Posts
    1,515
    Thanked: 0

    Thumbs down Removing a cladding dent....

    Not having the best of mornings today, i can get the VX around a forest between hundreds of trees on slippery banks however today i managed to nudge a single lamp post on a long stretch of empty pavement (sidewalk to you lot)

    I recon some boiling water ought to enable me to pop it back out? I can get to the back of it in the wheel well.

    ps, anyone got a spare indicator lense ?

    Speed Thrills, Boredom Kills!!

  2. #2
    Plonker!

    Yes I have an indicator lens... PM me your address

    Nick
    [SIGPIC][/SIGPIC]
    1997 Vehicross with mods coming! --- 1995 Pajero with lots of mods!
    2000 Audi Allroad - Wife won't let me mod

    Owner of the Four Wheel Drive Club in the UK - pop in and say hi! Click pic for link.

  3. #3
    Member Since
    Jan 2009
    Location
    97 Jap Import, Black BEAST
    Posts
    1,515
    Thanked: 0
    LOL!!! Thanks i'll PM you!

  4. #4
    Member Since
    Apr 2008
    Location
    2000 Foxfire Red Mica, 0555 (RIP) & 0717
    Posts
    6,229
    Thanked: 3
    I think someone said a hair dryer works best.

  5. #5
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    The question needs to be asked:

    Why were you driving on the sidewalk???
    [SIGPIC][/SIGPIC]

    Put a smiley after you say that Bub.

  6. #6
    Member Since
    Feb 2009
    Location
    1999,silver, 1516
    Posts
    905
    Thanked: 0
    Crazy Brits!

    Just kidding. I know it's frustrating...

  7. #7
    Member Since
    Jan 2009
    Location
    97 Jap Import, Black BEAST
    Posts
    1,515
    Thanked: 0
    i was doing a U turn, it was first thing without any caffeine in me! etc etc.....all quite embarrassing really

  8. #8
    Member Since
    Jun 2002
    Location
    2001 Ebony S/C #1304
    Posts
    3,647
    Thanked: 10
    Heat gun. ONLY apply heat from the INSIDE. I did it on my rear bumper cladding a while back and it was not much of an issue, but takes a bit longer to get it just right since this material is thicker than your average bumper cover.

    Yours might take some extra attention since it is right on the lens crease. Look for breaks/tears in that crease line on the inside. A heat gun and some resin should be able to treat it so it doesn't worsen anyways.
    Gary Noonan
    '01 S/C VX / '18 Forester XT

  9. #9
    Member Since
    Mar 2010
    Location
    2001 Ironman 0588
    Posts
    1,176
    Thanked: 0
    Quote Originally Posted by WormGod View Post
    Heat gun. ONLY apply heat from the INSIDE. I did it on my rear bumper cladding a while back and it was not much of an issue, but takes a bit longer to get it just right since this material is thicker than your average bumper cover.

    Yours might take some extra attention since it is right on the lens crease. Look for breaks/tears in that crease line on the inside. A heat gun and some resin should be able to treat it so it doesn't worsen anyways.
    When you repaired your dent, did it leave a lighter discoloration where it was bent the most?


  10. #10
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    Quote Originally Posted by crotchrocket View Post
    .....all quite embarrassing really
    Hence the ribbing.



    Just gotta keep it all in perspective. After all, I'm the one who threw a 2x4 into the trailer - missed & took out the VX tail light. Now THAT's embarrasing.

  11. #11
    Member Since
    Jan 2009
    Location
    97 Jap Import, Black BEAST
    Posts
    1,515
    Thanked: 0
    Dent is gone

    Thanks for the advise guys, the heat gun worked perfectly!

  12. #12
    Member Since
    May 2010
    Location
    1999 Ebony 1716
    Posts
    1,196
    Thanked: 0
    Stay off the side walks! It's bad enough you all drive on the wrong side of the road as it is, not only are us normal-side-of-the-road drivers in danger, now sidewalk pedestrians have to worry as well!

  13. #13
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    Crotchy,

    Remember the comment you made on this pic:

    http://www.vehicross.info/gallery/sh...hp?photo=18642

    Bet you're regretting it now!!!

Similar Threads

  1. Removing ALL cladding...any TIPS?
    By JoFotoz in forum VX Talk...
    Replies: 7
    Last Post: 02/20/2013, 02:47 PM
  2. Was just a dent
    By Gussie2000 in forum VX Talk...
    Replies: 9
    Last Post: 05/03/2011, 04:29 PM
  3. Deep dent from a Harley Sportster
    By Dino in forum VX Troubleshooting...
    Replies: 20
    Last Post: 07/12/2007, 08:39 PM
  4. removing interior
    By Amack76 in forum Body, Cladding, Windows & Interior
    Replies: 5
    Last Post: 12/15/2003, 05:38 PM
  5. Help w/ repairing a dent...
    By ScubaSteve in forum VX Talk...
    Replies: 15
    Last Post: 10/04/2003, 09:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails