Bump stops

[Ldub]

I don't understand how so many people can have issues with hitting the bump stops so much. With the 912's and daystar spacers I have at least 4 inches of space between the axles and bumps, and they are the whole bumps, not cut, not shorter than factory. I can't imagine that the factory suspension parts had them closer than an inch.

Maybe yours were already cut?

I've never seen a stock/non lifted VX with more than 3/4" between the stop & the axle pad, with 1/4-1/2" being far more common...

[Triathlete]

Dub, I think he was being funny...he says he has 912's plus spacers!

[Bob Barker]

No I was sayin that before the suspension mods, I can't imagine them being closer than an inch... The bumps aren't cut either. The whole "Figure 8" is there.

[vt_maverick]

In any event, going from anywhere from 1/2 to 1 1/2" of clearance to 3 or 4" will make a huge difference.

[Bob Barker]

fo shizzle!

[SouthJ1]

HAHAHA! YAY! He's not a robot! Just razzing you man. Are you getting rear stops or front stops or both?

I'm only getting rear stops for now since those are the only ones missing so far lol but on the exaughst note flow masters sound weird my isuzu kinda sounds like a diesel? Lol kinda a weird sound to hear from this thing but I have so many dtc codes right now I just sent all my injectors off to get cleaned hopefully it will give me some gas pedal cause right now my Vx bogs down when I give it past half throttle

[Marlin]

but on the exaughst note flow masters sound weird my isuzu kinda sounds like a diesel? Lol kinda a weird sound to hear from this thing but I have so many dtc codes right now I just sent all my injectors off to get cleaned hopefully it will give me some gas pedal cause right now my Vx bogs down when I give it past half throttle

I have the flowmaster 40, I love that it sounds like a diesel. One of my favorite mods...of course, I love my Diesel F250 as well. It may sound like a diesel anyway, the 3.5L valve train is very noisy.

[Maddawg]

Mine were touching the rear axle without a lift and I sawed them to half height. With my three inch lift I just took them off. We don't need no steenking stops!