Socket won't work. Removes from the inside out and there is a shaft (folcrum pin) in the center. Section 3c of the manual shows it.
Socket won't work. Removes from the inside out and there is a shaft (folcrum pin) in the center. Section 3c of the manual shows it.
Billy Oliver
15xIronman
My Sponsors:
Accelerate3Coaching
TriSports.com (PM me for 1 time use 20% off code)
Also, I am at a point of no return...I can not put it back as was. The inners of the current bushing pretty much disintegrated during the tear down.
Well, the sun is setting so I am calling it quites for the night. In the AM I will disconnect the brake lines, completely remove the control arm and have better access with the BFH.
I'm guessing that you might have to have them pressed out/in.
Pressed...BFH...same thing!