Page 1 of 2 1 2 LastLast
Results 1 to 15 of 22

Thread: ABS eliminated

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jun 2008
    Location
    2001,black, vehicross 1353
    Posts
    426
    Thanked: 0

    ABS eliminated

    I eliminated my ABS brakes when I did my rotors this summer (by mistake). But I decided to try it through the beginning of winter to see If I like it better without the annoying chattering on the pedal and the unwanted gliding through intersections I experienced last winter. So far it has been much better. Solid Braking on icy, snowy, deeply frozen snow pack, and slushy areas.
    I actually couldn't get it to stop with ABS sometimes. I'm still worried about the time when I'll have to slam them on out of sheer reaction, I think that's where they pay off.
    [SIGPIC][/SIGPIC]
    Milwaukee WI

  2. #2
    Member Since
    Sep 2010
    Location
    2000,Ebony,VEC,0013
    Posts
    683
    Thanked: 0
    My VX has been working fine without ABS as long as I have had it -4 months. The mechanic that was employed by the used car lot that sold it to me tore the ABS sensor wire out of the rt front when "she" did the ball joints. A 200 dollar loss I have not delt with yet.

  3. #3
    Member Since
    Jan 2009
    Location
    1999, Ebony Black, VX, 1614
    Posts
    1,852
    Thanked: 1
    Quote Originally Posted by Ebenezr View Post
    when "she"
    probably not the reason it got broke. A bad mechanic is a bad mechanic.

  4. #4
    Member Since
    Sep 2010
    Location
    2000,Ebony,VEC,0013
    Posts
    683
    Thanked: 0
    Quote Originally Posted by JAMAS View Post
    probably not the reason it got broke. A bad mechanic is a bad mechanic.
    I knew I was walking on eggshells when I spoke of gender. But she is a bad mechanic. She also reworked the brakes and tied off the rear brake line to the lateral rod which connects the axle to the frame. So with every bounce the brake line bends up and down. Nice. Then she was given a kia van to fix the water pump on and placed the timeing belt on wrong and bent the valves.

  5. #5
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    Quote Originally Posted by djvx View Post
    I'm still worried about the time when I'll have to slam them on out of sheer reaction, I think that's where they pay off.
    I highly recommend that you find an empty parking lot or a deserted road to test it out. It's always better to 'know by experience' how your vehicle will react.
    [SIGPIC][/SIGPIC]

    Put a smiley after you say that Bub.

  6. #6
    Member Since
    Jun 2002
    Location
    '99
    Posts
    1,158
    Thanked: 0
    Quote Originally Posted by djvx View Post
    I actually couldn't get it to stop with ABS sometimes.
    That's just what a lot of us have found out. Our ABS is just too sensitive. It can get you killed! I disabled mine permanently and before that I installed a cut-off switch that I used during slippery conditions.

    It's no fun when you need to stop and the ABS won't let it happen. There's times when you just need to stop ASAP and there's no place to steer around. In that case, ABS will cause an accident. Hopefully, no one will be killed or injured.

    Mark Griffin

  7. #7
    Member Since
    Jun 2002
    Location
    2001 Ebony S/C #1304
    Posts
    3,647
    Thanked: 10
    By habit, I always keep quite a bit of distance between me and the car forward anyways. Think it comes from living in DC with a manual tranny and just not wanting to sit on my brakes all the timer. Easier to just coast and torque brake, using that space to slow stop. I adopted this with my VX naturally. Different in an auto however, so at speed, I stay quite a ways away from folks.... in traffic, I tend to stay in a lower gear and keep some distance. Needless to say, I never go through brakes. I will probably go through a tranny first, heh.

    Because of this, I have never had to put it to the test with a hard brake. In any weather. I never was happy with the operation of the VX ABS system. It always seemed a step behind me and fought me no matter what I wanted to do. Can't say I miss it.
    Gary Noonan
    '01 S/C VX / '18 Forester XT

  8. #8
    Member Since
    Jan 2008
    Location
    1999 Astral Silver 0481
    Posts
    2,672
    Thanked: 0

    Arrow

    Quote Originally Posted by WormGod View Post
    By habit, I always keep quite a bit of distance between me and the car forward anyways. Think it comes from living in DC with a manual tranny and just not wanting to sit on my brakes all the timer. Easier to just coast and torque brake, using that space to slow stop. I adopted this with my VX naturally. Different in an auto however, so at speed, I stay quite a ways away from folks.... in traffic, I tend to stay in a lower gear and keep some distance. Needless to say, I never go through brakes. I will probably go through a tranny first, heh.

    Because of this, I have never had to put it to the test with a hard brake. In any weather. I never was happy with the operation of the VX ABS system. It always seemed a step behind me and fought me no matter what I wanted to do. Can't say I miss it.

    X2

    The braking distance of the VX is a bit freaky,i also make sure to stay away from the vehicule ahead of me. For a 4000 + pounds truck the brakes aren't the best.

    My ABS stoped working couple of months ago.
    Dakar was just the begining.

  9. #9
    Member Since
    Feb 2004
    Location
    '01 Ebony #0830
    Posts
    1,097
    Thanked: 0

    Question

    Question... If you disable the ABS while the controller is "good", would this halt further wear and pause the wear-timeframe, or would it continue to wear and possibly "go out" while electrically disconnected?
    SilverBullet75
    Formerly: '01 Ebony VXSTLTH
    Now: '08 Saab 9-7x Aero 6.0L

  10. #10
    Member Since
    Feb 2010
    Location
    2001,Kaiser,1130
    Posts
    346
    Thanked: 0
    Jeez guys, I was just about to make a thread on this. My ABS starts working again when its freeze your balls off cold, which it always is here in Minneapolis. My diagnostics and the ABS light tell me that the module needs to be replaced, but it comes alive when its really cold.

    I've been driving with the ABS on sometimes, and with it OFF sometimes and I was freaking out last night thinking one of my calipers had detached. I couldn't stop at lights without going 50ft past them, what the hell?? All the streets are snow-packed, but I never had these issues when the car warms up and the ABS light comes back on. I don't usually skid either.

    I've never owned a car with ABS before, I knew about he pulsing (which is NOISY) but not about the ****ty brake distances.

    Does anyone have a broken ABS module? I'd like to take it apart and see why mine re-activated when it gets cold, but shuts off after running the car for more than an hour (heat)

    Its 4 degrees F in minneapolis right now

  11. #11
    Member Since
    Jun 2002
    Location
    '99
    Posts
    1,158
    Thanked: 0
    Atilla, you're seeing the same thing as many of us. Do you really wanna fix it and make sure the ABS is on all the time? One day you may end up in the middle of an intersection and get t-boned by a big rig. That would suck!

    Mark

  12. #12
    Member Since
    Dec 2005
    Location
    2001, Dragon Green, 1342
    Posts
    2,393
    Thanked: 0
    Quote Originally Posted by atilla_the_fun View Post
    My ABS starts working again when its freeze your balls off cold, which it always is here in Minneapolis.
    Mine did the same exact thing when it got down into the 20's here but after the engine compartment warmed, the light came on.
    Greetings, Earthling. We come in peace... Never mind "Paris to Dakar", the VehiCROSS looks ready for the Martian desert.

  13. #13
    Member Since
    Jan 2009
    Location
    1999, Ebony Black, VX, 1614
    Posts
    1,852
    Thanked: 1
    Quote Originally Posted by rowhard View Post
    Mine did the same exact thing when it got down into the 20's here but after the engine compartment warmed, the light came on.
    Mine too.....wierd.

  14. #14
    Member Since
    Sep 2010
    Location
    2000,Ebony,VEC,0013
    Posts
    683
    Thanked: 0
    So I guess I DON"T want to fix my ABS.?

  15. #15
    Member Since
    Apr 2008
    Location
    2000 Foxfire Red Mica, 0555 (RIP) & 0717
    Posts
    6,229
    Thanked: 3
    So how do you disable the ABS? Pull all the ABS fuses?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails