Does anybody know if the r98 rodeo dash fits the vx?
thanx
Does anybody know if the r98 rodeo dash fits the vx?
thanx
Perfectly...I have one myself.
I thought only 95.5-97 were compatible.
thats what i was wondering
thanx
that dash is really quite ugly
edit: at least its double din... =(
My bad... It was from 96...
VX_Focus..are you replacing your dash with the rodeo version out of necessity and thats whats available...or that the look you prefer?
This is the '97 Rodeo dash-
Ya gotta figure Isuzu did the final design of the JDM VX in '96 with production for '97. I guess they were not gonna bother to change the dash to a '98 for the US version. I can't blame 'em. The US VX was all about the exterior and the seats. They were only looking to attract attention and sell a few thousand, so why bother with a fancier dash?
It's up to us owners to spice it up with a trim kit or some paint.
Mark
Last edited by deermagnet : 02/09/2011 at 07:46 PM
vxjunky,
my dash is cracked and covered with vinyl to hide it but it looks awful.i would replace it with a vx dash but cant find one so i figured if the rodeo and or passports have the same dash it might be easier to find.
i found a 98 rodeo dash on ebay for around 35 buck would have been a steal if it would fit
any 95.5-97 Rodeo dash would work so look for those!
1999 Isuzu Vehicross-#1209- lots of mods - gone
1995 Honda Passport: Lifted, Locked, 34x10.50's, just a few things..-Click for build thread
Is your dash cover or your dash bezel cracked? Be careful that you don't buy the wrong thing on eBay - $35 for the entire dash cover (horizontal surface that wraps around the dash) sounds cheap to me. $35 for the bezel (trim around the gauges, radio, etc.) is about right.
the whole dash not the trim and i know it was a steal!!!
here is the link
http://cgi.ebay.com/ebaymotors/98-19...Q5fAccessories