Trouble Code list - ODB2 codes

[BlackVX]

Here are the all the OBD2 codes from our vehicle.

http://www.troublecodes.net/isuzu/iszuobd2.shtml


OBD2


P0101
MAF System Performance

P0102
MAF Sensor Circuit Frequency Low

P0103
MAF Sensor Circuit Frequency High

P0106
MAP System Range/Performance

P0107
MAP Circuit Input Low

P0108
MAP Circuit Input High

P0112
IAT Circuit Input Low

P0113
IAT Circuit Input High

P0116
ECT Circuit Range/Performance

P0117
ECT Circuit Input Low

P0118
ECT Circuit Input High

P0121
TP Sensor System Performance

P0122
TP Sensor Circuit Input Low

P0123
TP Sensor Circuit Input High

P0125
ECT Insufficient Coolant Temperature For Closed Loop Fuel Control

P0131
HO2S Circuit Voltage Low Bank 1 Sensor 1

P0132
HO2S Circuit Voltage High Bank 1 Sensor 1

P0133
HO2S Slow Response Bank 1 Sensor 1

P0134
H02S Circuit No Activity Bank 1 Sensor 1

P0135
HO2S Heater Circuit Malfunction Bank 1 Sensor 1

P0137
HO2S Circuit Voltage Low Bank 1 Sensor 2

P0138
HO2S Circuit Voltage High Bank 1 Sensor 2

P0139
HO2S Slow Response Bank 1 Sensor 2

P0140
H02S Circuit No Activity Bank 1 Sensor 2

P0141
HO2S Heater Circuit Malfunction Bank 1 Sensor 2

P0143
HO2S Circuit Voltage Low Bank 1 Sensor 3

P0144
HO2S Circuit Voltage High Bank 1 Sensor 3

P0146
HO2S Insufficient Activity Bank 1 Sensor 3

P0147
HO2S Heater Circuit Bank 1 Sensor 3

P0151
HO2S Circuit Voltage Low Bank 2 Sensor 1

P0152
HO2S Circuit Voltage High Bank 2 Sensor 1

P0153
HO2S Circuit Slow Response Bank 2 Sensor 1

P0154
H02S Circuit Insufficient Activity Bank 2 Sensor 1

P0155
HO2S Heater Circuit Bank 2 Sensor 1

P0157
HO2S Circuit Voltage Low Bank 2 Sensor 2

P0158
HO2S Circuit Voltage High Bank 2 Sensor 2

P0160
H02S Circuit Insufficient Activity Bank 2 Sensor 2

P0161
HO2S Heater Circuit Bank 2 Sensor 2

P0171
Fuel Trim System Lean Bank 1

P0172
Fuel Trim System Rich Bank 1

P0174
Fuel Trim System Lean Bank 2

P0175
Fuel Trim System Rich Bank 2

P0201–P0206
Injector Control Circuit Cyls. 1–6

P0218
Transmission Over Temperature Condition

P0300
Engine Misfire Detected

P0301–P0306
Misfire Detected Cyls. 1–6

P0325
KS Filter Module Or Circuit

P0327
KS Sensor Circuit Input Low

P0335
CKP Sensor Circuit Malfunction

P0336
CKP Sensor 58X Reference Signal Circuit Range/Performance

P0337
CKP Sensor Circuit Frequency Low

P0341
CMP Sensor Circuit Range/Performance

P0342
CMP Sensor Circuit Input Low

P0351
Ignition Coil ‘‘A’’ Primary/Secondary Circuit Malfunction (2.2L)

Ignition Control Circuit (2.6L)

P0351–P0356
Ignition Control Circuits 1–6 (3.2L)

P0352
Ignition Coil ‘‘B’’ Primary/Secondary Circuit Malfunction (2.2L)

P0401
EGR Flow Insufficient

P0402
EGR Excessive Flow Detected

P0404
EGR Sensor Circuit Range/Performance, Stuck Open

P0405
EGR Sensor Circuit Low

P0406
EGR Sensor Circuit High

P0420
TWC System Low Efficiency Bank 1

P0430
TWC System Low Efficiency Bank 2

P0440
EVAP System Malfunction

P0441
EVAP System No Flow During Purge

P0442
EVAP System Small Leak Detected

P0443
EVAP System Purge Control Valve Circuit Malfunction

P0446
EVAP System Canister Vent Blocked (Except 2.2L)

EVAP System Canister Vent Control Circuit Malfunction (2.2L)

P0449
EVAP System Vent Valve/Solenoid Circuit Malfunction

P0452
EVAP System Pressure Sensor Input Low

P0453
EVAP System Pressure Sensor Input High

P0461
Fuel Level Sensor Circuit Performance

P0462
Fuel Level Sensor Circuit Input Low

P0463
Fuel Level Sensor Circuit Input High

P0480
Cooling Fan 1 Control Circuit

P0481
Cooling Fan 2 Control Circuit

P0501
VSS Circuit Range Performance

P0502
VSS Circuit Input Low

P0505
Idle Control System Malfunction

P0506
IAC System RPM Low

P0507
IAC System RPM High

P0532
A/C Refrigerant Pressure Sensor Circuit Input Low

P0533
A/C Refrigerant Pressure Sensor Circuit Input High

P0560
System Voltage Low

P0562
System Voltage Low

P0563
System Voltage High

P0601
PCM Memory Checksum Error

P0705
Transaxle Range Switch Circuit

P0706
Transaxle Range Switch Performance

P0712
TFT Voltage Low

P0713
Transmission Fluid Temperature Voltage High

P0719
Brake Switch Circuit Low

P0722
Output Speed Sensor Circuit No Signal

P0723
Output Speed Sensor Circuit Intermittent Signal

P0724
Brake Switch Circuit High

P0730
Gear Ratio Improper

P0742
TCC Circuit Stuck On

P0748
Transmission Pressure Control Solenoid Electrical Fault

P0751
Transmission SS ‘‘A’’ Performance Or Stuck Off

P0753
Transmission SS ‘‘A’’ Electrical Fault

P0756
Transmission SS ‘‘B’’ Performance Or Stuck Off

P0758
Transmission SS ‘‘B’’ Electrical Fault

P1106
MAP Circuit Intermittent Voltage High

P1107
MAP Circuit Intermittent Voltage Low

P1108
Barometric Pressure Circuit Input High

P1111
IAT Sensor Circuit Intermittent Voltage High

P1112
IAT Sensor Circuit Intermittent Voltage Low

P1114
ECT Sensor Circuit Intermittent Voltage Low

P1115
ECT Sensor Circuit Intermittent Voltage High

P1121
TP Sensor Circuit Intermittent Voltage High

P1122
TP Sensor Circuit Intermittent Voltage Low

P1133
H02S Insufficient Switching Bank 1 Sensor 1

P1134
H02S Transition Time Ratio Bank 1 Sensor 1

P1153
H02S Insufficient Switching Bank 2 Sensor 1

P1154
H02S Transition Time Ratio Bank 2 Sensor 1

P1171
Fuel System Lean During Acceleration

P1297
Electrical Load Detector Circuit Input Low

P1298
Electrical Load Detector Circuit Input High

P1300
Random Misfire

P1336
CKP System Variation Not Learned

P1359
CKP/TDC Sensor Disconnected

P1361
TDC Sensor Intermittent Interruption

P1362
TDC Sensor No Signal

P1380
ABS Rough Road System Fault

P1381
Cylinder Position Sensor Intermittent Interruption, Misfire Detected (Except 1998 Rodeo)

ABS Rough Road Class 2 Serial Data Fault Or Link Error (1998 Rodeo)

P1382
Cylinder Position Sensor No Signal

P1390
G Sensor Circuit Intermittent Voltage Low

P1391
G Sensor Performance

P1392
G Sensor Voltage Low

P1393
G Sensor Voltage High

P1394
G Sensor Intermittent Voltage High

P1404
EGR Valve Stuck Closed

P1406
EGR Valve Pintle Position Circuit

P1441
EVAP System Flow During Non-Purge

P1442
EVAP Vacuum Switch Voltage High During Ignition On

P1459
EVAP Emission Purge Flow Switch Malfunction

P1491
EGR Valve Lift Insufficient Detected

P1498
EGR Valve Lift Sensor Voltage High

P1508
IAC System RPM Low

P1509
IAC System RPM High

P1546
A/C Compressor Clutch Output Circuit Malfunction

P1548
A/C Compressor Clutch Output Circuit Malfunction

P1607
PCM Internal Circuit Failure ‘‘A’’

P1618
SPI Communications Error

P1625
PCM Unexpected Reset

P1627
PCM A/D Conversion Malfunction

P1635
5 Volt Reference Voltage Circuit Malfunction

P1640
ODM 1 Input Voltage High (Except 1998 Rodeo)

ODM Output ‘‘A’’ Circuit Fault (1998 Rodeo)

P1650
Quad Driver Module ‘‘A’’ Fault

P1790
Trans ROM Checksum Error

P1792
Trans EEPROM Checksum Error

P1835
Trans Kickdown Switch Malfunction

P1850
Brake Band Apply Solenoid Malfunction

P1860
TCC PWM Solenoid Circuit Failure

P1870
Transmission Component Slipping

[Swordy]

Thank you for posting this list of codes. It was like way more helpful than the code readers interpretation.

By the way, anyone know where I can get a better code reader? I'm thinkin like something I can hook up to my laptop.

This thread deserves more keywords. It was kinda hard to find. so... ODB2 codes, ODBII codes, ODB-2 codes,
ODB-II codes, ODB 2 codes, ODB II codes.

Thx, Andy

[AREA 51]

OBD , OBD 2 , OBD II , CODE , CODES , TROUBLECODE , TROUBLE CODE , TROUBLECODES , TROUBLE CODES .

[Robert]

Swordy,

Here is one that looks good:

www.autotap.com

Robert

[Bagheera]

Hey guys/girls =)

Anyone have any idea what could cause these codes to appear on the computer? P1640 ODM 1 Input Voltage High (Except 1998 Rodeo) & P1870 Transmission Component Slipping.....I just had my manifold intake gasket replaced (30783 miles on 1999) and 5 codes came up....3 realted to the gasket prob, but the other 2, the mechanic wasn't sure of (non Isuzu shop)

Should I worry? I wanted 20 " rims, but if my VX is gonna crap out soon, I should prob save the $$$$$$

Later,
~Kiersten

[SPAZZ]

dealer replaced my manifold once and f'd all sorts of things up....they had to keep it a month and a half just to fix everything they screwed up...I thought it was funny...maybe I would get a new engine..but it didn't hapen..and I wound up walking to work everyday for that time.

I guess the only way to be truly at peace is to gut all VX's everywhere and replace them with better working, fuel efficient, and more powerful ones...

[FernZ]

i think this should be made a sticky. Very helpful.

Also my check engine light came on and got it checked our. i got the following code: (P1153) which is H02S Insufficient Switching Bank 2 Sensor 1 .......um so what do i have to replace lol. Any info is appreciated.

[44ficus44]

Awsome. I was looking for this