Page 1 of 4 1 2 3 4 LastLast
Results 1 to 15 of 46

Thread: Timing Belt Life

  1. #1
    Member Since
    Aug 2005
    Location
    1999, silver, 0887
    Posts
    1,408
    Thanked: 3

    Post Timing Belt Life

    Just changed my timing belt for the first time....at 138K. It didn't look like it would have snapped, but maybe skipped a notch sometime soon. At any rate, 138K says alot about Isuzu OEM parts quality.

  2. #2
    Member Since
    Jun 2007
    Location
    2001, Proton
    Posts
    3,299
    Thanked: 0

    That is too long

    you got lucky. They dont always show wear and between the use and the high temps under a hood its better to be safer than sorry. I would suggest 215,000 for the next one or 7 years
    "Take it up with my butt, cuz he's the only one that gives a crap"

    Carter Pewterschmidt

  3. #3
    Member Since
    Aug 2005
    Location
    1999, silver, 0887
    Posts
    1,408
    Thanked: 3
    Thank you for that perspective and advice. We'll change my wife's '99 exactly at the factory recommended 100K.

  4. #4
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    Mine has 140,000+ on it....yeah, I know, gotta change it some time soon!

    Pretty sure I will get to it before the 215,000 mark! ~
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  5. #5
    At least neglecting it won't wreck the engine, like on some engines.

  6. #6
    Member Since
    Aug 2005
    Location
    1999, silver, 0887
    Posts
    1,408
    Thanked: 3
    Yeah, but if you breakdown out in the desert, the tow bill and motel stay while they fix it will wreck your wallet and your marrige, I'll bet.

  7. #7
    Member Since
    Aug 2005
    Location
    1999, silver, 0887
    Posts
    1,408
    Thanked: 3
    I've heard of one guy making 145k on the original belt, but that's the record I think?

  8. #8
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    Still on the original water pump too...no leaks ands bearings still sound good.

  9. #9
    Member Since
    Aug 2005
    Location
    1999, silver, 0887
    Posts
    1,408
    Thanked: 3
    Mine is the original water pump at 138K. And no leaks so we'll go another round, so to speak.

  10. #10
    Member Since
    Dec 2009
    Location
    1999,ebony,0316-1999,ironman,0324
    Posts
    99
    Thanked: 0
    What's the deal about time ? Some of our VXs have low mileage but the 99s are getting 11+ years on the timing belts. Do they need to be changed ?

  11. #11
    Member Since
    Aug 2005
    Location
    1999, silver, 0887
    Posts
    1,408
    Thanked: 3
    My Isuzu trained master technician says if it's not leaking leave it alone (He's said that for years, my wife's first '99 he did the belt at 100K , and said leave the pump alone. It's still running strong in Moscow. I guess if it's not broken don't fix it sort of mentality. ( By the way this guy has all sorts of special Vehicross training from way back when, he's got a wal full of Isuzu certificates.)

  12. #12
    Member Since
    May 2007
    Location
    1999 Black Rodeo
    Posts
    388
    Thanked: 0
    On the 3.2 and 3.5s the water pump or tensioner usually fails before the belt does. Mine all got changed at 88k miles because the guy I bought it from did all that plus new clutch and windshield before selling it (the reason I bought it even though I didnt want black).

    What's the deal about time ? Some of our VXs have low mileage but the 99s are getting 11+ years on the timing belts. Do they need to be changed ?
    Rubber does break down and dry out over time so it may not last as long as far as miles. But the biggest enemy to rubber is UV which isnt an issue with t-belts. Can probably go another 11 years lol.

    I wouldnt change the t-belt without changing the water pump. I just dont like doing work twice. If I just did the belt, the pump would fail on me 2 weeks later.
    --Dave

  13. #13
    Member Since
    Aug 2005
    Location
    1999, silver, 0887
    Posts
    1,408
    Thanked: 3
    Like I said... if it ain't broke don't fix it. It's just that simple. And this guy I work with you can bet your bottom dollar on.

  14. #14
    Member Since
    Jun 2002
    Location
    '99
    Posts
    1,158
    Thanked: 0
    Quote Originally Posted by blacksambo View Post
    Like I said... if it ain't broke don't fix it.
    So why doesn't that apply to the timing belt?

    You get the timing belt changed when it's working fine as preventive maintenance, before it breaks. The same principle applies to the water pump 'cuz it's so difficult to get to. You have to dig deep to get to the water pump behind the timing belt. As long as you're right there anyway, it'll take just a few minutes and not much money to change the water pump.

    If your water pump fails soon, it'll be such a waste to have to remove the timing belt again. You may say, "the water pump will probably last for years longer". You could say the same thing about the original timing belt. If you decide to do preventive maintenance on one part, why neglect the other?

    A broken timing belt is rare. A water pump problem is much more common. The water pump is by far the weaker part. If you're only gonna change one of those parts and not the other, I'd change the water pump. Change 'em both and be done with it.

    Mark Griffin
    Last edited by deermagnet : 06/25/2011 at 09:10 PM

  15. #15
    Member Since
    Aug 2005
    Location
    1999, silver, 0887
    Posts
    1,408
    Thanked: 3
    Think about it this way...everything around the t-belt is worn after 138K. That means the cam gears etc. So the most pliable or flexible item is the rubber belt. To break in other new metal/hard items carries an inherent risk of inbalance or noise in the whole chain of action. They run the risk of becoming minimally dissimilar components near term which causes extra pressure on the old items and are thus more prone to causing failure. Keep everything the same as much as possible...that's the best scenario.

Similar Threads

  1. Did I screw up my timing? Timing belt replacement
    By workmeistr in forum VX Troubleshooting...
    Replies: 6
    Last Post: 04/13/2015, 07:26 AM
  2. Who else is on their 3rd timing belt?
    By deermagnet in forum VX Talk...
    Replies: 3
    Last Post: 05/23/2011, 12:36 PM
  3. Timing belt replacement and timing videos
    By deermagnet in forum General Tips...
    Replies: 8
    Last Post: 11/26/2007, 08:09 PM
  4. Timing belt replacement and timing videos
    By deermagnet in forum Archives
    Replies: 8
    Last Post: 11/26/2007, 08:09 PM
  5. Timing Belt
    By Randy in forum VX Talk...
    Replies: 9
    Last Post: 10/21/2003, 09:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails