Results 1 to 9 of 9

Thread: amp placement

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Sep 2010
    Location
    1999 silver vx 0250
    Posts
    434
    Thanked: 0

    amp placement

    i have searched alot of amp placement threads and it looks like under the seat is the most popular place.but my amp is too big to fit there so i had to figure something else out.

    i decided to put it above jack compartment.
    first i took some romex wire to get the contour of the panel and traced it on two 2x4's

    a little test fit

    painted them black really quick(wont be able to see em anyway)
    cut hole in panel/ran the wires

    then i took some decking i had layin around and traced the foot print of the amp,cut it out and painted it,mounted it on the "feet"

    and the finished project..looks clean enuff.hope this help anyone lookin for a place for there amp.



  2. #2
    Member Since
    Mar 2011
    Location
    99, Orange, VX, 0398
    Posts
    141
    Thanked: 0
    I like it. Nice and clean. My component amp is about the same size and I've got it sitting right below where yours is in a vertical position right up against the floor. (My sub amp is in the rear door). I'm assuming your rear seats are out for good? Or will they still fit with the way yours is positioned?

  3. #3
    Member Since
    Aug 2008
    Location
    2001, PROTON YELLOW, VehiCROSS, 1451
    Posts
    1,955
    Thanked: 0
    Be sure to get your windows tinted, because that amp screams "Steal Me" to a car prowler!!!


  4. #4
    Member Since
    Sep 2010
    Location
    1999 silver vx 0250
    Posts
    434
    Thanked: 0
    seat fits and windows tinted check!

  5. #5
    Member Since
    Feb 2009
    Location
    1999,silver, 1516
    Posts
    905
    Thanked: 0
    How did you attach the wooden "feet" to the interior?

  6. #6
    Member Since
    Jun 2002
    Location
    2001 Ebony S/C #1304
    Posts
    3,647
    Thanked: 10
    Right on, but in my neck of the woods, I would soon be replacing an amp and a window. Stealth placement is golden.
    Gary Noonan
    '01 S/C VX / '18 Forester XT

  7. #7
    Member Since
    Sep 2010
    Location
    1999 silver vx 0250
    Posts
    434
    Thanked: 0
    Quote Originally Posted by samneil2000 View Post
    How did you attach the wooden "feet" to the interior?
    screws from the inside

  8. #8
    Member Since
    Jan 2005
    Location
    2001, Ebony Black, 1153
    Posts
    2,264
    Thanked: 2
    That amp looks smaller than mine and my Infinity Amp is under my driver's seat. I did have to cut some metal off the seat to make it fit, but it is possible once you take out the foam and carpet under the seat. Check my gallery for pics :-) good luck. That does look like a buffet for a thief right now.

  9. #9
    Member Since
    Sep 2010
    Location
    1999 silver vx 0250
    Posts
    434
    Thanked: 0
    Quote Originally Posted by LittleBeast View Post
    That amp looks smaller than mine and my Infinity Amp is under my driver's seat. I did have to cut some metal off the seat to make it fit, but it is possible once you take out the foam and carpet under the seat. Check my gallery for pics :-) good luck. That does look like a buffet for a thief right now.
    you cant see it from outside lookin in...pretty dark tint.
    the amp is13 1/4 x 8 1/4 x 2

Similar Threads

  1. claddinf screw placement short/long?
    By vxfocus in forum VX Troubleshooting...
    Replies: 5
    Last Post: 03/19/2013, 06:31 AM
  2. Back up camera screen placement
    By Mile High VX in forum VX Talk...
    Replies: 1
    Last Post: 09/09/2012, 08:15 AM
  3. Midrange and Midbass speaker placement
    By gunpackingpoet in forum VX Talk...
    Replies: 3
    Last Post: 04/08/2007, 02:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails