Page 2 of 4 FirstFirst 1 2 3 4 LastLast
Results 16 to 30 of 54

Thread: Trans fluid??

  1. #16
    Member Since
    Feb 2007
    Location
    '01, Proton, VehiCROSS, 0229
    Posts
    631
    Thanked: 15
    I got my VX about 3-4 yrs now. I had the trans fluid changed immediately as part of a check list of things I did. I haven't changed it since. I've been told that since it's been so long that I should change it or it will kill the transmission. Is this true?
    ---------

    Ty

  2. #17
    Member Since
    Jul 2003
    Location
    '01 Ebony #0939
    Posts
    2,142
    Thanked: 5
    Quote Originally Posted by tysamigo View Post
    I got my VX about 3-4 yrs now. I had the trans fluid changed immediately as part of a check list of things I did. I haven't changed it since. I've been told that since it's been so long that I should change it or it will kill the transmission. Is this true?
    Trans fluid and filter in transmissions is just like engine oil in engines. There's usually a timeframe/mileage recommended by the manufacturer for when they should be replaced.

    Transmission fluids and filter changes for automatic transmissions are generally recommended at around 60k miles (after new, or, since they were last replaced), but individual driving conditions and type of fluid can change those time periods and mileages.

  3. #18
    Member Since
    Mar 2010
    Location
    2001 Ironman 0588
    Posts
    1,176
    Thanked: 0
    Atilla mentioned to "be cautious" before agreeing to a transmission flush. To elaborate, there have been several posts here where people suspect that a flush may have lead to failure of their transmissions. Some advice says to avoid it unless you know it's been done on a regular basis.

    You may have already read this, but just in case others read this thread in the future, I thought it was worth mentioning. Search for "transmission flush" for more details.


  4. #19
    Member Since
    Feb 2007
    Location
    '01, Proton, VehiCROSS, 0229
    Posts
    631
    Thanked: 15
    Quote Originally Posted by RickOKC View Post
    Atilla mentioned to "be cautious" before agreeing to a transmission flush. To elaborate, there have been several posts here where people suspect that a flush may have lead to failure of their transmissions. Some advice says to avoid it unless you know it's been done on a regular basis.

    You may have already read this, but just in case others read this thread in the future, I thought it was worth mentioning. Search for "transmission flush" for more details.
    This is what I've heard. I got the Proton 3-4 years ago with 25k miles. It now has 94k miles. I had the fluid changed once when I first got it and haven't changed it since. Would it be ok to change now you think?

  5. #20
    Member Since
    Jul 2009
    Location
    '01, Proton Yellow, 1028. '01, Gunmetal Metallic, 1033.
    Posts
    1,226
    Thanked: 0
    With 70,000 since the last change, now would be a good time to change the fluid and filter. I bought mine with 150,000 miles and changed the filter and fluid to Amsoil Synthetic ATF with only good things to say about the trans performance since then, no horror stories or doom and gloom! I would NOT flush it though, too many reported problems with that procedure, usually resulting in transmission failure...
    Vixer Fixer

  6. #21
    Member Since
    Jul 2004
    Location
    1999/black/VX/black
    Posts
    808
    Thanked: 0
    Quote Originally Posted by Scott Larson View Post
    I would NOT flush it though, too many reported problems with that procedure, usually resulting in transmission failure
    X2

  7. #22
    Member Since
    Jul 2010
    Location
    1999,silver,VX,0118 & 1144
    Posts
    144
    Thanked: 0
    I have the fear of doing a change, only because in the past, the vehicle always ran funny afterwards. I bought all the parts then I was reminded how things run after filter changes. Has anyone experienced any problems after the filter and fluid change?

  8. #23
    Member Since
    Nov 2009
    Location
    2001Proton 1432, ex 2001 Dragon Green Mica 0168 (RIP May 2017)
    Posts
    3,590
    Thanked: 31
    Quote Originally Posted by jmayer40 View Post
    I have the fear of doing a change, only because in the past, the vehicle always ran funny afterwards. I bought all the parts then I was reminded how things run after filter changes. Has anyone experienced any problems after the filter and fluid change?
    I had the Check Trans Temp light come on ONCE only a few hours after I had the work done. I posted here and a few others had the same thing. It has not ever come on again and it runs/shifts great.
    Live, Love, Forgive and Never Give Up

  9. #24
    Member Since
    Feb 2010
    Location
    2001,Kaiser,1130
    Posts
    346
    Thanked: 0
    Mine actually shifted smoother after the filter change, it was a slight change - but perceivable. The filter was very very dirty, very clogged. I never had the temp light issue - and the job went smoothly, except removing the old gasket from the pan mating surface. (it took a long time). Support the transmission with a jack, drop the crossmember with a socket and a breaker bar, drop the pan, remove the old gasket, change the filter, put a bead of RTV on the mating surface and set the new gasket, then put the pan back on with the new filter installed. Repeat for the second pan, then refill the pan with ~7 quarts of synthetic ATF.

    Wash the pans with brake cleaner to remove the metal shavings which inevitably coat the bottom of the inside of the pan.

  10. #25
    Member Since
    Jul 2003
    Location
    '01 Ebony #0939
    Posts
    2,142
    Thanked: 5
    Quote Originally Posted by jmayer40 View Post
    ...Has anyone experienced any problems after the filter and fluid change?
    I changed my own filter and fluid to synthetic not long after purchasing my VX and haven't had any problems. My VX doesn't get subjected to much severe duty though (towing, extensive off-road 4x4 usage, etc) so a VX operating under those conditions will also require more frequent trans fluid and filter servicing.

  11. #26
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    I have always been told that rtv or the likes is a no-no on trans gaskets. If small pieces of it dry out and break free they clog the small passageways and cause problems by restricting/blocking fluid flow.
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  12. #27
    Member Since
    Feb 2010
    Location
    2001,Kaiser,1130
    Posts
    346
    Thanked: 0
    The filter is right on top of the pan, and I didn't see any small passageways in the area that isn't beyond the filter, but I'll keep an eye out. The bead size I used should not have exceeded the mating surface, even when pressed.

  13. #28
    Member Since
    Jan 2012
    Location
    1999,Black,9273
    Posts
    35
    Thanked: 0
    Ok I have two v-cross I did transmission flush this weekend.. one went good but the 2nd one slipped on me after 5 min test driving.. it shifted violently coming out of 1 st gear then rev high and shifted hard again from 1st to 2nd.. I got nervous and stopped went thru each gear with brake on and turn off and back on and it seemed ok... I went home and parked it.. any idea what might have happened. Did I over fill??
    Last edited by molivares : 02/27/2012 at 11:24 AM Reason: typo

  14. #29
    Member Since
    Feb 2010
    Location
    2001,Kaiser,1130
    Posts
    346
    Thanked: 0
    You did a flush? Did you read through this thread at all? Flushing and changing fluid are different things. Flushing involves actively cleaning out the transmission, while changing fluids is just replacing the fluid in the pans after you turn the truck off.

    You may have under-filled. If you open the fill port (the higher of the two bolts) and cycle through the gears with the engine warm, you should see a very fine drip when the fluid is at the right level. No drip, and you should add fluid (and cycle through gears). If you overfilled it, just let it drain from the fill port until its just a trickle.

  15. #30
    Member Since
    Jan 2012
    Location
    1999,Black,9273
    Posts
    35
    Thanked: 0
    Thanks, Yes I meant changing fluids.. So ether overfilling or under filling would cause this and did I cause any damage to the transmission from this skipping ?

Similar Threads

  1. Checking Trans fluid
    By ahdoman in forum VX Troubleshooting...
    Replies: 9
    Last Post: 08/04/2014, 09:11 AM
  2. Trans fluid change oil temp question
    By Tornado in forum VX Troubleshooting...
    Replies: 9
    Last Post: 07/17/2013, 02:12 PM
  3. checking the trans fluid
    By Vehi-Cross-Az in forum VX Troubleshooting...
    Replies: 5
    Last Post: 12/06/2007, 01:16 PM
  4. Trans fluid change - caution
    By marcosv6 in forum General Tips...
    Replies: 5
    Last Post: 04/04/2007, 09:36 PM
  5. change trans fluid?
    By zadam123 in forum VX Talk...
    Replies: 20
    Last Post: 11/03/2004, 03:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails