New style bumper skid plate and hood scoop

[maxprime]

Well, thanks guys.
On a side note.
5 months ago, I attemped to contact the asian Vx'ers about the 2 mode rear lights and plates and never heard from them. Now, all of a sudden. They emailed me wanting to buy a dozen plates,lol.

Workmeistr, No worries.
With anything, If you do anything to your vehicle,It's best to check your local and federal laws. As for the lights, I knew I was legal in Pa for tinting them. Just wanted to have the exact requirements before I posted. Pa has some strict laws on somethings and not on others. Like window tint , the law states the front door glass has to allow 75% light through the tint "aka no tint allowed" and for the other windows no requirement on them.You can black them out aslong as you have side mirrors,lol.
I hunt down some pic's of the SX/4. I stripped it out totally now and am making it modern styled. I do this for a living plus build custom show computers for Nvidia and other company's for exhibits ,movie premiers and such.
Here's one I did for Nvidia and hasbro:

[Vendetta]

On another note, I'd love to see pictures of your "Go Mango Orange" AMC SX/4; could you post in the for-the-life-of-me-I-can't-find-now "What else do your drive Thread," if you can find it?

I believe this is the thread in question.

Max, thanks for the PM. We'll be in touch.

-V

[vt_maverick]

Well, thanks guys.
On a side note.
5 months ago, I attemped to contact the asian Vx'ers about the 2 mode rear lights and plates and never heard from them. Now, all of a sudden. They emailed me wanting to buy a dozen plates,lol.

I suggest you tread carefully on selling your stuff to those guys, lest you repeat history:

http://www.vehicross.info/forums/sho...5&postcount=14

I'm not sure what those guys have ever supplied us, though they have ready access to a ton of JDM accessories to make molds. Personally I wouldn't bother with them, I imagine you'll probably have your hands more than full from US buyers.

[maxprime]

I suggest you tread carefully on selling your stuff to those guys, lest you repeat history:

http://www.vehicross.info/forums/sho...5&postcount=14

I'm not sure what those guys have ever supplied us, though they have ready access to a ton of JDM accessories to make molds. Personally I wouldn't bother with them, I imagine you'll probably have your hands more than full from US buyers.

vt_maverick,

Your right. I just thought it was funny they contacted me after 5 months. So, I was planning to do the same in my reply to them.
I don't have a interest on selling to them and as far as what i'm making i'm just making what I personally want for my Vx's and if someone wants something i'll make it for them.
Once I get these skid plates out the door ,i'm going to finish off the jdm style light mount. I needed to do both so they fit properly if mounted together.

[LittleBeast]

Max, just to be clear, your craftsmanship look top of the line, and that custom computer is awesome! Sorry I assumed your entire brakelight housing was tinted, because honestly in the pictures that is what it looks like. The laws here in TX are far more strict I think. Here are the TX rules:

(d) A taillamp shall emit a red light plainly visible at a
distance of 1,000 feet from the rear of the vehicle.
(1) visible in normal sunlight at a distance of at
least 300 feet from the rear of the vehicle; and
(2) displayed when the vehicle service brake is
applied.

But I think the reflector one is the one that the LED brake light mod breaks, and I do not think I am compliant on this one:

§ 547.325. REFLECTORS REQUIRED. (a) Except as
provided by Subchapter F, a motor vehicle, trailer, semitrailer, or
pole trailer shall be equipped with at least two red reflectors on
the rear of the vehicle. A red reflector may be included as a part
of a taillamp
(b) A reflector shall be:
(1) mounted at a height from 15 to 60 inches; and
(2) visible at night at all distances:
(A) from 100 to 600 feet when directly in front of
lawful lower beams of headlamps; or
(B) from 100 to 350 feet when directly in front of
lawful upper beams of headlamps if the vehicle was manufactured or
assembled before January 1, 1972.

But once again I am glad you (and it seems like many others) are happy with the front skid and lights, they certainly look high quality, but I just hope your lights don't break due to "skidding" on something ;-)

Have you considered making a design with no lights?

[maxprime]

Update, on the progress.
I got the molds finished and even had time to do one for myself
I also received my 2.5" amber tunnel lights sooner than expected and installed both the skid plate and lights.
Finally getting closer on being ready to strip it all down and refinish the cladding and do the paint .
Here are some new pictures:

Parking lights on/no flash


Parking lights on/w flash



Daytime/lights off


Well, that's all till after the holiday.
Have a Happy Easter.

[Scott Harness]

I really like it.I would have to take it off every time I went off-roading though

[tysamigo]

I LOVE IT!

Hey, did you have a chance to see if the color of those can be changed?

LOOKS GREAT!!

[maxprime]

I LOVE IT!

Hey, did you have a chance to see if the color of those can be changed?

LOOKS GREAT!!

I looked at them and both are colored leds on a ring sealed in the housing.
I wouldn't want to say it couldn't be done. I think if you would take the time and separated the housing you could install any color of the strip led light to get the same effect. But, it would be just trial and error method of converting it.

[tysamigo]

I looked at them and both are colored leds on a ring sealed in the housing.
I wouldn't want to say it couldn't be done. I think if you would take the time and separated the housing you could install any color of the strip led light to get the same effect. But, it would be just trial and error method of converting it.

OK, cool thanks. I ordered 2 for the rear cladding in RED. I'll look at them to see if it's something I want to fool with. But I think these in a deep blue would be awesome on my proton

[jn]

I love the plate you designed. Are you or have you produced any additional for sale?

[JoFotoz]

If you read the last few lines of post 23 on this thread...

.

I love the plate you designed. Are you or have you produced any additional for sale?

...I do believe you'll find your answer.


Jo

[bcb9112001]

are you going into business, makeing skid plates, how about the rear?

Iam interested in front and rear skid plates if reasonably priced??

write back bcb9112001@hotmail.com thanks

[maxprime]

Update:
Today I will finish the 5 skid plates for members and they will be shipped fri.
I should have pictures up for the JDM light mount this weekend, now that I will have the plates done I can finish it up.
Also, the guys from Japan have emailed several times now and want 15 of them, hehe. They have told me that the story about them is not true and they wouldn't copy my plates. Funny, I never asked anything about that. lol. "they sound fishy to me"

I decided to post the change on the pricing of the skid plate. While I made the first 6 for members. I was asked If they could supply the lights? I told them yes and made the price $200.00 and I supplied the SS hardware and primed it for paint.
That's all for now.

[pueblavx]

I want that skid plate...i live near san ysidro, san diego california
let me know if u have one of these front and back skid plates aluminium
Thanks
fernandopuebla7@hotmail.com