AutoPros V8 Build - Photo Thread

[MSHardeman]

That is freakin' impressive. Congratulations on a top notch build.
Y'all do EXCELLENT work.

[Riff Raff]

What am I forgetting?

Errr.........the most important finishing touch that's all. That would be the "flip-flopped" side fender emblems to read: 5.3L

Doh.

[Triathlete]

She cleaned up nicely!

[tomdietrying]

OK.........I noticed on your check list you didn't have "video tape burn out".
hmmmm........ that would please everybody. How about it?
Peace.
Tom

[JoFotoz]

Indeed....

Video with SOUND...

...and extreme tire abuse.

....

Jo

[JoFotoz]

I kind of like...

Errr.........the most important finishing touch that's all. That would be the "flip-flopped" side fender emblems to read: 5.3LDoh.

...the stealth/street sleeper approach.

It'll freak people even more

Jo

[Mile High VX]

Sunroof would be nice...

Perhaps a set of OEM roof bars and a great roof basket like a Thule 696.

[AutoPros]

$250+ for new emblems was just not a priority for the customer any longer, and the condition of the emblems would not have allowed for removal and reinstallation of them. The alternative was clean them up and touch them up with paint.

With new tires and the motor needing to be broken in properly, a burnout video was just not the best decision at this time, even if we would LOVE to see what she can do. Perhaps the owner will shoot some footage for us!

This was a fun project and we would love to do more to it and make it more aggressive and an off road beast! If anyone is ready to do the conversion on theirs as complete as this build, call us!

Feel free to like us on Facebook as well, and view the photo album on there. We will be adding more photos and videos as we come across them.

[HeckaTrebeka]

[QUOTE=AutoPros;277225]With new tires and the motor needing to be broken in properly, a burnout video was just not the best decision at this time, even if we would LOVE to see what she can do.QUOTE]

Now I'm not saying this as a joke or to try and fool you, but a co-worker who has been working on motors for over 30 years swears by taking the engine through every RPM that it's capable of so that the rings seat properly. This is what keeps the motor from having oil leak issues down the road.

With this information presented to you, you can now think about how you're only helping your customer by burning out. Plus, you don't want those new tires to be all slippery.

[Riff Raff]

$250+ for new emblems was just not a priority for the customer any longer, and the condition of the emblems would not have allowed for removal and reinstallation of them. The alternative was clean them up and touch them up with paint.

Okay, here's the very best solution of all:

Use some professional grade Decal Remover and a hard rubber spatula (so as not to scratch the paint) to only remove the "3" and the "dot" characters from each side fender, leaving the "5L" remaining in place (then it will be quickly finished to perfection without spending an additional $250). Having only the "5L" will be sufficient.

You're Welcome.

[AutoPros]

We couldn't leave well enough alone. We swapped out the tires again and went up to a 285/75R16.

[HeckaTrebeka]

Okay, here's the very best solution of all:

Use some professional grade Decal Remover and a hard rubber spatula (so as not to scratch the paint) to only remove the "3" and the "dot" characters from each side fender, leaving the "5L" remaining in place (then it will be quickly finished to perfection without spending an additional $250). Having only the "5L" will be sufficient.

You're Welcome.

What about just swapping the 5 and the 3? Since that's the actual size, right?

[Riff Raff]

What about just swapping the 5 and the 3? Since that's the actual size, right?

Nope, it won't work. If you go back and re-read AutoPro's post #203 above, they basically stated that the removal and reinstallation of the same old number emblems are much too deteriorated for successful reapplication and would not likely re-stick once removed. Brand new emblem sets cost $250 and that was the reason they were not ordered by the customer/VX owner.

Consequently; to save spending $250 for a brand new set of emblems, the best solution is just to only remove the "3" and the "dot", while leaving the original "5L" remaining in place on each side fender. Ka-pisch???

[VX KAT]

Geez, what's all this talk of $250??? That's for a complete set of every decal/badge on the truck.
A brand new 3.5L badge from Isuzu is only $14.80 each.

[JoFotoz]

I'm with you Sue..
I was trying to figure if the aforementioned emblems.... were made of Unobtanium

Here is all thats required....( unless you just stay stealth...my personal pref!)

http://www.ebay.com/itm/CHROME-RED-M...82d1b3&vxp=mtr


....for $8.95

jo