Page 1 of 2 1 2 LastLast
Results 1 to 15 of 21

Thread: Grille Projects

  1. #1
    Member Since
    Aug 2012
    Location
    99 Ebony Vx's, 0054 & 1548
    Posts
    349
    Thanked: 0

    Grille Projects

    I made light guard out of the oem speaker covers (rear panels). The turn signal covers are mounted by the oem screws. The driving light covers are formed and glued in place with plastic epoxy.





    Thanks Kat for the extra set of covers.

    Life is better when you go Topless

  2. #2
    Member Since
    Jun 2004
    Location
    99 Astral Silver VX #1872 + 99 Ironman WIP
    Posts
    10,613
    Thanked: 1

    Thumbs up

    .

    Look'n Good...

  3. #3
    Member Since
    Jun 2009
    Location
    99 Matte Midnight Sand Met... oh nevermind. VX #0377...Project ZU
    Posts
    2,656
    Thanked: 4
    Good idea, the results look sharp.

  4. #4
    Member Since
    Aug 2012
    Location
    99 Ebony Vx's, 0054 & 1548
    Posts
    349
    Thanked: 0
    These are simple covers formed by a hand made press. The grille is formed to match the curves of the light cover. I plan on making 9 covers for the front of the VX:
    2 for the turn signals
    2 for the running lights
    2 for the bumper space by the Lic plate
    3 for the grille area (plan on keeping the VX Fangs there)

    Here is a pic of the wooden press made. First make a card board cutout, then make a match out of a piece of wood, then the outer mold. A Jig saw and a large file is all I used. After that a simple vise or C Clamps work as the press. Be careful if using softter wood (like plywood), it may break or crack.


    I plan in the long run to order new covers for the turn signals. Originally I was planing on replacing them with smoke lens, now I am leaning towards clear covers.

    What does the rest of the VX community think? clear or smoke?
    Last edited by VxSport : 12/31/2012 at 06:07 AM

  5. #5
    Member Since
    Jun 2009
    Location
    99 Matte Midnight Sand Met... oh nevermind. VX #0377...Project ZU
    Posts
    2,656
    Thanked: 4
    I have smoked markers but I personally think the clear look better. Can you still buy clear lenses and if so, where?

  6. #6
    Member Since
    Aug 2012
    Location
    99 Ebony Vx's, 0054 & 1548
    Posts
    349
    Thanked: 0
    I am looking for the link for you. I saw it a few months ago. If I don't find it soon, maybe Kat will jump in and post it.

    Quote Originally Posted by VXorado View Post
    I have smoked markers but I personally think the clear look better. Can you still buy clear lenses and if so, where?

  7. #7
    Member Since
    Nov 2009
    Location
    2001Proton 1432, ex 2001 Dragon Green Mica 0168 (RIP May 2017)
    Posts
    3,590
    Thanked: 31
    http://www.klearz.com/isuzu.html

    This should get you what you're looking for...
    Live, Love, Forgive and Never Give Up

  8. #8
    Member Since
    Aug 2012
    Location
    99 Ebony Vx's, 0054 & 1548
    Posts
    349
    Thanked: 0
    Thanks for the link....

    Quote Originally Posted by Mile High VX View Post
    http://www.klearz.com/isuzu.html

    This should get you what you're looking for...

  9. #9
    Member Since
    Aug 2012
    Location
    99 Ebony Vx's, 0054 & 1548
    Posts
    349
    Thanked: 0
    Let me know if you want to do a combined order.

    Quote Originally Posted by VXorado View Post
    I have smoked markers but I personally think the clear look better. Can you still buy clear lenses and if so, where?

  10. #10
    Member Since
    Aug 2012
    Location
    1999, silver,vehicross,0555
    Posts
    38
    Thanked: 0
    Quote Originally Posted by VxSport View Post
    I made light guard out of the oem speaker covers (rear panels). The turn signal covers are mounted by the oem screws. The driving light covers are formed and glued in place with plastic epoxy.





    Thanks Kat for the extra set of covers.
    I like how those rodeo wheels look.

  11. #11
    Member Since
    Aug 2012
    Location
    99 Ebony Vx's, 0054 & 1548
    Posts
    349
    Thanked: 0
    Yep, you are correct.... This set is from a 94-95 Rodeo & Passport. These are a rare size, 16x7.5 same offset as the rest. I sent these out for powder coating a couple yeares ago.

    Quote Originally Posted by chadzu View Post
    I like how those rodeo wheels look.

  12. #12
    Member Since
    Sep 2010
    Location
    2001 kaizer vx
    Posts
    160
    Thanked: 0
    Klearz lenzes on my truck become yellow within two years (((( May be too much road salt in Canada or UV light))))
    Now I use turn signals out of 2000 GMC Savana they are Little bit bigger so have to use longer screwslenz assy positive side - they are for double lightbulb lightbulb socket needed(turnsignal and marker) .
    tomorrow will make some pics. how they seat in.

  13. #13
    Member Since
    Oct 2012
    Location
    2001, Proton, 0586
    Posts
    445
    Thanked: 0
    Quote Originally Posted by Dmitrikr View Post
    Klearz lenzes on my truck become yellow within two years (((( May be too much road salt in Canada or UV light))))
    Now I use turn signals out of 2000 GMC Savana they are Little bit bigger so have to use longer screwslenz assy positive side - they are for double lightbulb lightbulb socket needed(turnsignal and marker) .
    tomorrow will make some pics. how they seat in.
    I would love to see more details on this!

  14. #14
    Member Since
    Mar 2010
    Location
    2001 Ironman 0588
    Posts
    1,176
    Thanked: 0
    Quote Originally Posted by Dmitrikr View Post
    Klearz lenzes on my truck become yellow within two years (((( May be too much road salt in Canada or UV light))))
    Your lenses from Klearz lasted longer than the side lenses I bought from him (this company is just a guy working out of his home garage.) It took a month and two emails before he finally shipped mine. Two months later one of them cracked. The guy promised to replace it but never followed through. A few months after that, the other lens started holding water. Frustrated, I asked for a refund but he said he couldn't afford that right now and offered to send replacements. Again, it never happened. My experience: build quality is poor & customer service matches.
    Buyer beware.


  15. #15
    Member Since
    Apr 2011
    Location
    01 Proton 00 Kaiser 99 IM
    Posts
    216
    Thanked: 0
    I have a couple of the front signal covers as well as a set of the side signals from klearz on the way so I can post pics of what they look like before and after if you would like to see them.

Similar Threads

  1. Paracord/survival projects
    By Marlin in forum Chit-Chat ...
    Replies: 16
    Last Post: 01/18/2011, 02:41 PM
  2. Some projects for the new year
    By Moncha in forum News
    Replies: 12
    Last Post: 12/23/2008, 02:25 PM
  3. 2 VX projects
    By Vehi-Cross-Az in forum VX Modifications...
    Replies: 15
    Last Post: 01/02/2008, 03:29 PM
  4. Mods & Projects - UPDATES
    By Joe_Black in forum VX Modifications...
    Replies: 18
    Last Post: 11/04/2004, 08:22 PM
  5. Grille Mod
    By VehiCrazy in forum VX Modifications...
    Replies: 1
    Last Post: 09/26/2002, 04:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails