Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 16 to 30 of 44

Thread: 3.8L Series II w/ SC swap?

  1. #16
    Member Since
    Jan 2013
    Location
    2001,custom,#0947
    Posts
    329
    Thanked: 0
    Quote Originally Posted by Leon R View Post
    Did you really just asked me that? I thought I made it perfectly clear, that I prefer turbochargers to supercharger!

    But I suspect that like most people, you do not bother with the destitution between turbo vs super chargers.

    I have not yet turbocharged my VX. I have to complete two other car projects (converting my Eclipse Spyder from FWD - Auto to AWD - 5sp manual and then installing 4G63 Mitsu engine in Triumph TR7) before I can undertake the turbo VX project. But I started collecting the parts and AEM FIC is the first step in my "master plan".

    And as I have said, I am often tempted with the LS4 conversion... But that will only happen if someone develops (and sells) a good starter mount option.

    As far SMOG is concerned, forced induction is easier to pull off than LS4 swap, but in Mass, that is only a concern for another 2 years. After 15 years, they stop checking OBD2 codes, so you can get away with almost anything
    Hihi thats me ... i did ask. For the same reason. I was gonna say what happened to the turbo option you were thinking of hajaha.

  2. #17
    Member Since
    Nov 2012
    Location
    1999, Blue (Astral)5 spd VX #1396 ; '01 Proton 0753
    Posts
    775
    Thanked: 3
    Reviving this old thread for Thrasher.
    There's no 'I' in denial.

  3. #18
    Member Since
    Jun 2009
    Location
    99 Matte Midnight Sand Met... oh nevermind. VX #0377...Project ZU
    Posts
    2,656
    Thanked: 4
    Quote Originally Posted by bartmanS4 View Post
    Reviving this old thread for Thrasher.
    ...ah yes. We've been waiting for you to take the plunge Scotty!

  4. #19
    So the 3800 FWD bolt pattern does not bolt directly to the 4L30e huh? Hmm - what bellhousing bolt pattern was on the 1st gen Troopers with the 2.8 V6? Was that a RWD pattern? I vaguely recall now - it's been a few years - that's why the 3.4L out of a F body was a popular swap (due to RWD) and not the FWD 60 deg V6's, right?

    And the 3800 F bodies had a 4L60e with a removable bellhousing on them didn't they? Does our 4L30e have a removable or fixed bellhousing? So who makes an adapter to adapt between the GM FWD bolt pattern and the 4L30e? Cost?

    The Northstars had a lot of head gasket issues and wouldn't they have the same bellhousing issue? Plus depending on the model year, most had the Siemans PCM and I don't know if anyone's reverse engineered that to program it.

    The 3800 should fit better being smaller and it's durability is much better (once you address the intake issues on the L36). So just how weak is the 4L30e?

  5. #20
    Member Since
    Nov 2009
    Location
    2001Proton 1432, ex 2001 Dragon Green Mica 0168 (RIP May 2017)
    Posts
    3,590
    Thanked: 31
    Quote Originally Posted by thrashercharged View Post
    So just how weak is the 4L30e?
    I recall that it's only rated for 260 ft lbs of torque.

    Numerous members here have had failures of this transmission so it has a poor reputation.
    Live, Love, Forgive and Never Give Up

  6. #21
    Yeah, I know it's a weak tranny - I bought a 2002 Trooper with a bad tranny and haven't had time to dive into it yet - it's still parked at the shop.

    So that 260 limit is just under the 280 ft-lbs output of the stock L67. I wonder what the Bimmer folks have done to improve the 4L30e. Once I have mine apart I guess I'll get a chance to see just how small the clutches and things are. But I'm not intending on ever putting slicks on a VX and taking it down the strip so the abuse shouldn't be as bad. I'm wondering if a shift kit and some higher friction clutches (don't know if Raybestos has any for this trans or not) and a bigger trans cooler will help it live.

    I'm mainly interested in keeping the 4L30e just to make for an easier and cheaper swap and to keep the TOD as the TOD seems to be the heart of a VX. I assume the tailshaft of the 4L60e doesn't allow the TOD transfer case to fit?

  7. #22
    Member Since
    Nov 2012
    Location
    1999, Blue (Astral)5 spd VX #1396 ; '01 Proton 0753
    Posts
    775
    Thanked: 3
    The 4L30e is a weak link but not necessarily because of it's torque rating. The failures seem to be associated with solenoids etc. I would highly suggest doing a 5 spd swap though and the AR5 is a pretty rugged option that allows you to maintain TOD.
    The bolt pattern is 60^ GM for 4L30e and AR5.
    Everything I've seen shows the 3800 using the same bolt pattern.
    http://en.wikipedia.org/wiki/List_of...using_patterns

  8. #23
    "The bolt pattern is 60^ GM for 4L30e and AR5."

    So wait, will the 3800 bolt up to our 4L30e or not? Someone said earlier in this thread that it would not and would need an adapter. I know the 3800 and 3400 (which is a 60 deg V6) - both are typically used in FWD vehicles - share the same bellhousing bolt pattern.

    Solenoids have been a known failure item in earlier 4T65e too but I believe you can get fairly robust ones to replace with, so I'd assume the same for 4L30e.

    I didn't know you could retain the TOD with the AR5 - that's the 5 speed used in later Troopers (1999-2002) isn't it?

    So assuming that the 3800 will bolt right in, why hasn't this swap been done already? Is there a big issue with motor mounts or something? Seems the F body parts like exhaust manifolds should make this easy?

  9. #24
    Member Since
    Nov 2012
    Location
    1999, Blue (Astral)5 spd VX #1396 ; '01 Proton 0753
    Posts
    775
    Thanked: 3
    Quote Originally Posted by thrashercharged View Post
    So wait, will the 3800 bolt up to our 4L30e or not? Someone said earlier in this thread that it would not and would need an adapter. I know the 3800 and 3400 (which is a 60 deg V6) - both are typically used in FWD vehicles - share the same bellhousing bolt pattern.
    I don't know for sure but everything I've seen as far as specs go says it should work. LeonR said it won't work but I don't know what info he's working with. He may be right though. I do have an AR5 bellhousing sitting in my garage. If I could find a L67 to test fit it to...

    I didn't know you could retain the TOD with the AR5 - that's the 5 speed used in later Troopers (1999-2002) isn't it?
    Yes, four that I know of have been done including mine.
    http://www.vehicross.info/forums/sho...light=ar5+swap

    So assuming that the 3800 will bolt right in, why hasn't this swap been done already? Is there a big issue with motor mounts or something? Seems the F body parts like exhaust manifolds should make this easy?
    I think someone with an Amigo did it but no one has done this on a VX to the best of my knowledge. I suggest you do it and document it well so that when I do it I can learn from your mistakes.

  10. #25
    When I get around to pulling that 4L30e out of that Trooper I'll fit it to a L67 block and see if indeed they fit and take some pictures.

    Do you or anyone already know of any fitment issues? Does the oil pan / starter clear or is that an unknown? Anyone already look at the width? Does it fit between the rails?

    I suppose the AR5 does away with any tranny controls issues but I'd think the 4L30e and the 4T65e that the L67 came with are close enough so the L67 PCM can control the 4L30e with some wiring and programming.

    The TOD has a controller completely separate from the engine/trans controls right? And so does the ABS? I'd assume all they really need from the PCM is engine RPM or something like that so that might be an issue. I wonder if it got this info via a CAN or GM ClassII bus or something? That'll be something to look into. I guess that'll be the only hic-up, the communication with the TOD/ABS stuff since the engine will not be running off the Isuzu controller.

  11. #26
    So I have a question about that TOD with the AR5 - Isuzu never had these working together from the factory right? The VX never got a AR5 and all the Trooper's with AR5 didn't get the TOD but got a conventional transfer case instead, right?

    So did you just bolt the AR5 onto the TOD and it fit and just worked? Any negatives? If not, why didn't Isuzu offer that combo in the Trooper?

  12. #27
    Member Since
    Nov 2012
    Location
    1999, Blue (Astral)5 spd VX #1396 ; '01 Proton 0753
    Posts
    775
    Thanked: 3
    AR5 will accept the TOD with minor grinding relief near the shifter housing. See the link above for details.
    TOD works great with the AR5 and you get a better crawl ration because of the 1st gear being 3.95. I've since swapped my TOD out for a manual 2H, 4H, 4Lo TC but only because I want a larger crawl ratio.
    As far as anyone who has driven the AR5/TOD combo we ALL agree Isuzu should have made them this way.

  13. #28
    Member Since
    Oct 2012
    Location
    2001, Proton, 0586
    Posts
    445
    Thanked: 0
    Guys, I was talking about Grand National 3.8, which uses different transmission pattern. Looks like FWD Buicks 3800's will fit.

    But... considering that LS4 is CHEAP and is direct bolt up to Isuzu, why would you ever consider anything else?
    96 Eclipse Spyder GSX (already turbo, AWD swap)
    93 Eagle Summit AWD (4G63 turbo swaps)

  14. #29
    Member Since
    Jun 2007
    Location
    2001, Proton
    Posts
    3,299
    Thanked: 0

    You have to remember

    Quote Originally Posted by bartmanS4 View Post
    AR5 will accept the TOD with minor grinding relief near the shifter housing. See the link above for details.
    TOD works great with the AR5 and you get a better crawl ration because of the 1st gear being 3.95. I've since swapped my TOD out for a manual 2H, 4H, 4Lo TC but only because I want a larger crawl ratio.
    As far as anyone who has driven the AR5/TOD combo we ALL agree Isuzu should have made them this way.
    These small Crossover SUVs were already at $32,000+ At that the price point affected the sale. A bigger better Tranny probably would have added to the sticker.
    "Take it up with my butt, cuz he's the only one that gives a crap"

    Carter Pewterschmidt

  15. #30
    @LeonR - yeah, the GN was a BOP RWD pattern. Regarding the LS4, I've a few concerns:

    1. It's longer, so harder to fit behind the radiator
    2. No factory RWD exhaust manifolds ready to bolt on
    3. Harder to find in boneyards than the 3800
    4. I have to admit I haven't priced 'em, but they've got to be more costly than the L36 or L67 in boneyards? The Flint engine plant made almost a million or more 3800's so they're everywhere.
    5. Something about the starter needing to be mounted differently?

    Aside from these reasons, I'm also just more familiar with the 3800's and their control systems and integrating it into another vehicle, etc. and I know very little in comparison about the LS4. I've ready access to 3800's and don't have a LS4, so the choice is obvious for me. But regardless, I think for anyone, the much more affordable build will be the 3800 from many reasons - one being that you can use the stock PCM and wiring harness that you'll probably get for free with the engine - no need to spend the money on Megasquirt, etc. and stock either the L36 or L67 will give comparable power to the original 3.5L (so you don't have to worry about stressing the 4L30e) and if trans durability isn't a concern, the L67 can be modified to make plenty enough power.

    I have to agree that if you have your heart set on a V8 for that V8 exhaust note if nothing else, the LS4 is definitely the way to go over any other LS series due to the FWD bolt pattern. So how cheap is a LS4? Are they easy to find? So no one wants them due to the bolt pattern?

    Anyone have any comments on how the TOD and ABS controller interface with the PCM?

    @circmand - I see you're from Greenville, MS? I'm from MS - my wife's from Greenville but it's been over 20 years ago. Got married there @ 1st Baptist. Is the drag strip still open? I got stopped by the cops drag racing a buddy's '84 Mustang GT against another buddy's brand new '86 GT while a guy that just bought a GN off the showroom floor paced us ('cause it was no contest that it was faster!) at 3:00 AM on Hwy 82 coming into town back in the day when we were young and stupid! We stop at Doe's Eat Place whenever we're back now days and don't mind spending the money!

Similar Threads

  1. v8 swap help
    By imfraeglasgow in forum VX Modifications...
    Replies: 21
    Last Post: 07/10/2012, 09:08 AM
  2. LS1 Swap?
    By Exclamation in forum VX Talk...
    Replies: 32
    Last Post: 05/10/2011, 10:40 PM
  3. Rancho 9000 series (time sensitive)
    By etlsport in forum VX Modifications...
    Replies: 7
    Last Post: 03/28/2010, 08:38 AM
  4. Tire question: series differences on stock rim
    By Boogieman in forum VX Modifications...
    Replies: 6
    Last Post: 12/18/2005, 09:19 PM
  5. Another LS1 swap, in a BMW
    By volume311 in forum Polls
    Replies: 6
    Last Post: 02/07/2004, 02:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails