Axle Assemblies....Anyone heard of SURTRACK?

[JoFotoz]

My local garage is fitting these to an Ironman...right now.


http://surtrack.biz/external?url=htt...ycarparts.net/

(Wait a couple of secs, then click Isuzu..then VX..)

Impossible to tell if they are tripod bearings or ball without taking them apart...
...and the garage guys didint thinks that was a great plan!!!

Anyone know...?

Anyone heard of them...?

I'll call them Monday, just thought I'd throw it out there given axls/shaft/cup/bearings questions.

Jo

[Triathlete]

Jo, just from some quick search...
Chinese made, look to cost anywhere from $45-75, there site really doesn't give much info which makes me a bit leary, claims to be reverse engineered from oem, could find no real world reviews.

[JoFotoz]

Thanks Billy.....

Jo, just from some quick search...
Chinese made, look to cost anywhere from $45-75, there site really doesn't give much info which makes me a bit leary, claims to be reverse engineered from oem, could find no real world reviews.

....I know the cost, and I've seen them....played with them at the garage.
( they called me for advice!! )

My question is..without taking them apart..does anyone know the bearing set up in the cup..
..and has anyone used them...and can give feedback on how they perform.

They look OK ( cup is silver, not green!)..but looks can be deceiving ..

I'll follow up with the company Monday..just wanted fast info, if available from folks here!

Jo

[Triathlete]

Will be interested to hear what you find out!

[JoFotoz]

Me too.....

Will be interested to hear what you find out!

If they are ball race ( as OEM) and not 'tripod roller' bearings ( binding issues when lifted.). ......
...and they dont have the "smaller balls" issue ( ) .... that the EMPI brand does...

..maybe they are a good find.

We shall see.

jo

[PK]

If you look on their site, the photo of the complete axle without the green cup does show a 6 ball setup.
Not sure of the diameter or the quality.

PK

[JoFotoz]

Good catch PK...

If you look on their site, the photo of the complete axle without the green cup does show a 6 ball setup.
Not sure of the diameter or the quality.

PK

...I was fixated on the whole assembly.

You're right..thats not a tripod bearing.

Now..if it's OEM style...

...we might have something.



jo

[RabidPony]

Maybe a few of us could chip in to buy one for an autopsy. That way no one is throwing away a wad of cash.

[JoFotoz]

I'll get in touch with them this week...

Maybe a few of us could chip in to buy one for an autopsy. That way no one is throwing away a wad of cash.

...and ask about the ball bearing size etc.

If it all measures up to OEM ( not Empi ~small!)..

...I'll order a set and bring them to Moab for general inspection.

Anyone have the exact overall length of full OEM assemblies for either side......?

Jo

[Triathlete]

PK...the only problem is most sites like that show a generic pic of one of their shafts for all applications and not a pic of that specific shaft so they could differ when you actually get your hands on one.

[VXorado]

What I know...

EMPI

Rzeppa = - for trooper rzeppa cups

Tripod =



Hope for the best, expect the worst.

[MSHardeman]

Jo, I have a complete driver side axle as a spare. If you need me to measure it let me know.

[JoFotoz]

Yes please Mark!!

Jo, I have a complete driver side axle as a spare. If you need me to measure it let me know.

If its an original OEM ...

...if you can get compressed and un-compresed length that would be awesome!

Thanks

jo

[MSHardeman]

Yep, full OEM assembly. Got it from a salvage yard VX when my driver side green cup got messed up, but ended up not having to use it.

It's buried in my garage and it's beddy-by time here. Hope it can wait until after work tomorrow.

[JoFotoz]

Sweet...

Yep, full OEM assembly. Got it from a salvage yard VX when my driver side green cup got messed up, but ends up not having to use it.

It's buried in my garage and it's beddy-by time here. Hope it can wait until after work tomorrow.

.....anytime its good for you, is good for me.

I'll get the tech details from "SurTrack" tomorrow or Tues...so no huge rush.

Thanks Mark

Jo