FYI to those that need to replace the power steering HP hose. I ordered the replacement hose through Rockauto and the hose is correct but the copper crush washers are not the right size. Travis had the same problem but I don't know where he ordered his hose from. If new crush washers are needed you can order a steering pump rebuild kit from O'Riellys for under $20. This comes with the proper sized washers, a few o-rings, and a gasket. I used two of the o-rings and discarded (saved in a pile of stuff that I never throw away) the rest of the kit. I found that removing the pulley allowed access to get a wrench on the hex part of the pump that the HP line attaches to. I did not remove the pump itself. Now that I know how to do it it's not that bad but while I was doing it I was thinking I'd rather just pay someone else to do it.