The ORW..after Re-Build.

[Marlin]

For the basic LineX, it was <$2000 for the whole truck.

[JoFotoz]

Ummmmm...

For the basic LineX, it was <$2000 for the whole truck.

..........sort of/but not really....and its not "basic"

Anyone in the San Diego area that wants details I'll happily go over it....

....I did a deal involving some experimentation plus mine is being used
in a series of advertising shots for the franchise that did it.

I got a smoking deal.... and FULL Kudos to Jason @ Line-X San Diego.

JO

[JoFotoz]

Thanks for all the .....comments.

She came out better than I could of hoped for...I love her,
and its great that some others do too

Big Props to:-
VXorado...endless Line-X/mechanical chat.
VXFocus...he put the first Camaro scoop on, I had to copy it!
PBKid.......bouncing ideas back and forth for the Rock Bumper.
Jason........for producing the great 3D graphics.
LDub.......for always being on the other end of the phone when I needed
him !

I've had several enquiries about the Rock bumper & Hood Scoop insert...
...I'll do a write up later...and may produce a limited run of both if the interest holds.

She survived Moab very well...with a few Line_X adhesion issues...
...but this was expected.
I'll be experimenting with Jason @ Line-X San Diego in the coming months.

Cheers from the Stoop

Jo

[Marlin]

By basic, I meant linex offers 3 variations in the civilian world, lineX, lineX extra, which is lineX with color and UV protectant, and they offer a kevlar fortified topcoat. All linex is badass, the difference basically being to add color and/or UV topcoat which makes it shiny.

I humbly apologize if the basic part sounded demeaning or anything.

Your truck truly looks badass and mean and has the equipment to back it up. No mall crawler you got there.

[JoFotoz]

Fear not Marlin !

I wasn't offended by "basic" in the least.......

Just didn't want others to compare the price you quoted for mine incorrectly...
...if they are thinking of doing the same.

Jo

[Marlin]

Did u put all the clips back on the cladding? I found that the oem screw mounts were more than enough, and for some reason I have like 10 of the cladding screws left over. I replaced the rear cladding screws with hex heads, but that is only 5. I also went without the bottom mounts since I removed the rear bumper tubing.only problem I had was teh half moon, the plastic posts that the c clips go on broke off.

[Marlin]

I also have to go in for a touch up in one spot. The rear cladding on the drivers side tore through when it rubbed the tail light. Have shave a bit off the light fiixture.

[Marlin]

I also have to go in for a touch up in one spot. The rear cladding on the drivers side tore through when it rubbed the tail light. Have shave a bit off the light fiixture.