New Brake Rotors and Pads

[fotomaker]

I just received the diagnosis that it is time for new rear brake rotors and pads.

Isuzu rotors are over $ 200 each!
Please offer your experiences and decisions on the matter.
OEM Vs Slotted and/or Drilled?
Anyone use R1?

Thanks!

Jeff

[MSHardeman]

I know many VX owners have use the R1 rotors with much success. I'm sure that they will chime in here.

I went with SP Performance drilled and slotted rotors with stock Isuzu pads. I don't remember why I went with SP rotors (just to be different?), but they have worked well for the past four or five years. I went with the stock Isuzu pads because they tend to last a LOOOOOONG time and create very little dust.

I know drilled and slotted rotors are useless on my VX because I'm never going to rally the truck and push the brakes hard enough, but dang they look cool.

[evillecutter]

http://www.carid.com/1999-isuzu-vehi...-10730297.html

i dont have these but they look cool - and if you just want basic replacement rotors they shouldnt be more than $50 each at any brake shop or parts store

[Gizmo42]

I put some Brake Labs Power Sport slotted only rotors and ceramic pads on my Rodeo before Moab this year and so far I've been really happy with them. Was only about $220 shipped for a full set from Ebay.

Unfortunately they dont make them for my Volvo so its probably going to get Centric plain or slotted only rotors with Hawk HPS pads. That combination gets really good reviews from the Volvo community.

[fotomaker]

After a couple of hours of web research... I am thinking of going with R1 Premium Rotors and Hawk HPS pads. I haven't decided between blanks and slotted.

[WormGod]

I went with DBA slotted rotors and EBC green pads.

No real need for slotted. They are just a "look, I got slotted rotors bro!" conversation. No real payoff, Other unknowing people will just see them and think you have a mad fast car yo.

[fotomaker]

R1 says that you get a wee bit more stopping power from slotted and chew up the pads a wee bit quicker.

My intellect says go blank and my emotions are routing for slotted... Film at 11!

[jasonm621]

I like my drilled and slotted R1 concepts! I replaced my OEM's after they started warping. choice was to either pay $150 to machine the rusted OEM's or $300 for brand new pads and rotors. Ive had the new ones on for almost 2 years and no issues what so ever!

[fotomaker]

I still have to act on this…

Any opinions on OEM vs Premium?

Jason which did you choose?

[rowhard]

I still have to act on this…

Any opinions on OEM vs Premium?

I have the R1's, been running them for a few years with no issues. Just got a flyer from them for 17% off site wide if your interested. use prom code SPD2014 Ends March 25th

[nocturnalVX]

I had drilled & slotted on all 4 corners, but I put the Premier OE rotors on the back when my right rear caliper went. I was searching for info & saw all the plusses and minuses, and IMHO it really doesn't matter all that much on a purely street vehicle. The trade offs? Solid rotors = more surface area and stopping. The drilled & slotted = more cooling/water clearing, looks (if you can see them), and cheese graters for your pads. In street/Moab use? I really didn't notice too much difference.

[fotomaker]

Thanks for the input!

[fotomaker]

Update...

I replaced all four calipers, rotors and pads with R1 products.
It has been about 16 months and 12K miles.

I was just informed that my rear pads and rotors are shot and need to be replaced.
Nothing was said about the fronts.

Wonderful!

[Mile High VX]

Maybe get a second opinion...seems odd that they would fail in such a short time.

[DaGambit69]

Rockauto has Brembo rear rotors for 12.64 still.