Results 1 to 15 of 15

Thread: Thud/Bang after HARD braking

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Oct 2012
    Location
    2001, Proton, 0586
    Posts
    445
    Thanked: 0

    Thud/Bang after HARD braking

    Every time, after I come to an abrupt stop, I experience a thud/bang when I start moving. It is like something gets "loaded up" during braking and then gets released when brakes are released.

    Has anyone heard of this phenomenon on VX?
    Last edited by Leon R : 03/27/2014 at 05:43 AM
    96 Eclipse Spyder GSX (already turbo, AWD swap)
    93 Eagle Summit AWD (4G63 turbo swaps)

  2. #2
    Member Since
    Jun 2002
    Location
    2001, Proton Yellow, VX, 1379 (sold)
    Posts
    994
    Thanked: 0
    This has been reported several times, and usually was resolved by greasing the drive shaft. There are three zerk fittings, if I rememeber correctly. I had the same issue once, and grease fixed mine.
    Gregg
    2001 Proton Yellow #1379

  3. #3
    Member Since
    Oct 2012
    Location
    2001, Proton, 0586
    Posts
    445
    Thanked: 0
    Seriously? I would have never thought of this solution!

    Thanks for heads up, I will have to try this. Certainly easier than what I was thinking (worn bushings/motor mounts).

  4. #4
    Member Since
    Oct 2012
    Location
    2001, Proton, 0586
    Posts
    445
    Thanked: 0
    OK, I finally spent 30 minutes under my VX and I can't anything that can be greased... Does anyone have a better description of what needs to be lubricated?

  5. #5
    Member Since
    Nov 2009
    Location
    2001Proton 1432, ex 2001 Dragon Green Mica 0168 (RIP May 2017)
    Posts
    3,590
    Thanked: 31
    There are three zerk fittings on the driveshaft...one on each of the U-joints and one on the slip joint of the shaft itself. If you don't see them you may need to move the VX so that the driveshaft rotates and brings them into view. The one on the driveshaft is closer to the front.
    Live, Love, Forgive and Never Give Up

  6. #6
    Member Since
    Oct 2012
    Location
    2001, Proton, 0586
    Posts
    445
    Thanked: 0
    I found them, all three are "in-phase" and they were all pointing UP (making them impossible to see from the bottom ). I filled them full of grease, lets see if that helps the problem.

  7. #7
    Member Since
    Sep 2002
    Location
    99 Silver 515
    Posts
    76
    Thanked: 0
    I was in a junkyard where someone was pulling a transmission out of a VX. the cross member (transmission rear support) was laying on the ground and was in perfect shape so I took it home with me. Mine was badly dented and when I pulled off mine and set them side by side mine was bowed up 2in in the middle where the transmission sits. I put on the undamaged cross member and that thud after braking then taking off was gone. Coincidence? Maybe. Can't explain why that helped, but now after 2+ years it hasn't done it since.

  8. #8
    Member Since
    Jul 2003
    Location
    '01 Ebony #0939
    Posts
    2,142
    Thanked: 5
    The VX is heavy for it's relative size as a 4x4 vehicle, so keeping the u-joints properly/regularly lubed is important.

    Unless your motor or trans mounts are worn and the torque from the engine from a standing stop is allowing part of the powertrain to hit against the underside of the body somewhere, the u-joints and slip-joint would have been my guess too.

    Easy enough to check and address anyway.

  9. #9
    Member Since
    Oct 2012
    Location
    2001, Proton, 0586
    Posts
    445
    Thanked: 0
    Just to update, the thud is gone!

  10. #10
    Member Since
    Nov 2009
    Location
    2001Proton 1432, ex 2001 Dragon Green Mica 0168 (RIP May 2017)
    Posts
    3,590
    Thanked: 31
    And the thrill is back and better than ever...congrats!

  11. #11
    Member Since
    Mar 2012
    Location
    2001 Ebony #0254
    Posts
    395
    Thanked: 16
    Sorry I missed this thread and did not see it until you figured it out I might have saved you some time and aggravation. I am glad you got it fixed.
    I had the same problem and the transmission mount was the problem. I made a thread about it a while back so I added the link below in case anyone is interested in what I found too.
    http://www.vehicross.info/showthread...t=transmission

    Also if anyone is interested Joe Darlington makes a poly transmission mount, we bought 2 of them and they are nice, PM him if you need or want one.
    http://www.vehicross.info/member.php...Joe-Darlington

  12. #12
    Member Since
    Apr 2011
    Location
    01 Proton 00 Kaiser 99 IM
    Posts
    216
    Thanked: 0
    Did you get one from Joe? I picked up 2 and plan to install them before the moab trip.

  13. #13
    Member Since
    Nov 2009
    Location
    2001Proton 1432, ex 2001 Dragon Green Mica 0168 (RIP May 2017)
    Posts
    3,590
    Thanked: 31
    Quote Originally Posted by arcobarco View Post
    Did you get one from Joe? I picked up 2 and plan to install them before the moab trip.
    Go your PM but your box is full and won't let me send you anything. Here is the answer to your question...

    Shows available on isuzuparts.com under body hardware/trim then hood then exterior trim then decal...about $53.00

  14. The Following User Says Thank You to Mile High VX For This Useful Post:

    arcobarco (01/01/2017)

  15. #14
    Member Since
    Mar 2012
    Location
    2001 Ebony #0254
    Posts
    395
    Thanked: 16
    Yes, Kevin and I bought 2 of them from Joe. One is installed in the Ironman, the Ebony has a new regular one so we have not installed Joe's in that one yet. I like them and think they are a good upgrade.
    Last edited by CatFish : 12/30/2016 at 10:31 PM

  16. The Following User Says Thank You to CatFish For This Useful Post:

    arcobarco (01/01/2017)

  17. #15
    I’ve had this trouble for a few years now. I will try your solution. Thanks.

Similar Threads

  1. Started the season off with a bang!
    By Triathlete in forum VX Talk...
    Replies: 9
    Last Post: 02/28/2009, 09:48 PM
  2. braking problem
    By rowhard in forum VX Talk...
    Replies: 3
    Last Post: 01/19/2009, 09:57 AM
  3. bang headlights
    By zadam123 in forum VX Troubleshooting...
    Replies: 6
    Last Post: 01/18/2007, 10:17 PM
  4. Well, it happened... BANG.
    By billh23 in forum VX Talk...
    Replies: 75
    Last Post: 07/02/2004, 04:36 AM
  5. OT: July 4th BANG BANG
    By Joe_Black in forum VX Talk...
    Replies: 6
    Last Post: 07/08/2003, 07:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails