Battery died while being stored.
Replaced battery with a new one.
Zero power going into the truck now?
Is there a main circuit breaker or something that needs to be reset?
Thanks
Battery died while being stored.
Replaced battery with a new one.
Zero power going into the truck now?
Is there a main circuit breaker or something that needs to be reset?
Thanks
Only thing I can suggest is grab the wire bundle that goes into the engine bay fuse box and give it a gentle wiggle back and forth and/or wiggle/tap/pull the fuses in the box that have to do with the ignition. Check for any blown fuses in both engine bay and driver side fuse panel. Worked on a friends Pathfinder. Damn gremlins...
01 VX Kaiser | Love it! Drive it! Mod it! MYVEHICROSS.com | VX-WIKI
Rancho RS9000X | VXC Shifter Plates | PV2 | Hella Micro DE fogs | Carbon Fiber Hood | AfterShock Skid Plates (front, rear, sides)
Rodents chew through wires?
Excessive rust/corrosion on ground cable (check both ends).?
Billy Oliver
15xIronman
My Sponsors:
Accelerate3Coaching
TriSports.com (PM me for 1 time use 20% off code)
Only stored for three weeks. No rodents.
Used a battery minder in cig lighter.
Any clues there?
Blown fuse...
Yes....but which one?
Thx
sambo,
It could be security system related. There are 2 attachments in this thread that talk about it: http://www.vehicross.info/forums/sho...threadid=25516
Try turning the key quickly ON-OFF-ON. If that doesn't work, try ACC-OFF-ACC. If that's the problem, you should get either a chirp or lights flashing to let you know that you just disabled the alarm system.
It's not likely that this is the issue since the security system is supposed to just disable the starter ... not cut all power. But, it's one of those easy things to try & costs nothing.
Tom
[SIGPIC][/SIGPIC]
Put a smiley after you say that Bub.
Thank you to all.
There is a reset button on the inside door fuse panel. All set.
Good info to know for future. Thanks for update. Glad you got her up and running.