Results 1 to 6 of 6

Thread: Winch

  1. #1

    Winch

    I've been gator hunting through in florida lately and the VX did great through the creeks and sandy swamp muck but was thinking I could really use some reassurance. The problem is that I'm way out in the middle of no where and I'm sure even a 4x4 tow truck couldn't get out to me if I ever got stuck so my process of driving was very slow and thought out. Before executing an obstacle I'd stop, get out and walk around before going forth which made this kind of hunting very slow and inefficient. I'd like a winch on the front to keep me moving. How would I mount a winch on this SUV with the cladding? I've never mounted one before.

  2. #2
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    Do a search. There are several threads where others have mounted winches. You will need to fab a mount behind the cladding and cut the cladding.
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  3. #3
    Member Since
    Nov 2009
    Location
    2001Proton 1432, ex 2001 Dragon Green Mica 0168 (RIP May 2017)
    Posts
    3,590
    Thanked: 31
    Here's a freebie to get you started...

    http://www.vehicross.info/forums/sho...=winch+install
    Live, Love, Forgive and Never Give Up

  4. #4

    .

    Thanks mile, I wasn't finding anything in search. Seems like allot of work to get this idea going and I don't have a welder(though I'd love an excuse to get one). I'm not huge into off roading but would using a manual winch, the ones that have a long bar for the crank, be the poor mans substitute for a winch? I'm not sure if that's a common practice for off roaders but I'd be just fine spending the thirty bucks and tossin that in the back if I knew it would work should I need it.
    Last edited by Vinnybin : 06/14/2014 at 03:48 PM

  5. #5
    Member Since
    Sep 2010
    Location
    1999,VX, 2477
    Posts
    742
    Thanked: 8
    In this setup, the OEM bumper reinforcement is removed for something bit more beefy. IIRC, it weights 67lbs w/the winch attached. Nothing has to be moved for it to fit, although you have to cut a hole in the cladding where the license plate would mount.

    Before:


    After:
    Last edited by eternal21 : 06/14/2014 at 04:36 PM

  6. #6
    Member Since
    Nov 2011
    Location
    1999 Ironman 1515
    Posts
    92
    Thanked: 4
    I put a 2" receiver hitch extending from the right frame rail along with a 200 amp plug. I use the receiver for moving trailers around the yard and only put the winch on when I need it. I also have a plug on the rear so I can use the winch there also. I put a wireless remote control on the winch that I have used about fifty feet away. I had to move a truck so I hooked the winch to the VX and then hooked the cable to the truck, with me in the truck to steer, I used the remote to pull the truck into my garage.
    If you don't mount the winch permanently you don't have to carry the weight around all of the time and the winch is less exposed to the elements. Plus you can use it on any vehicle with a receiver hitch and some long battery cables.
    Mike

Similar Threads

  1. Winch
    By Nerve_Gas in forum VX Modifications...
    Replies: 6
    Last Post: 04/15/2006, 10:49 PM
  2. Winch installed
    By rocket man in forum VX Modifications...
    Replies: 2
    Last Post: 05/23/2005, 12:48 PM
  3. Winch Bar and Snorkel
    By mytronic in forum VX Modifications...
    Replies: 10
    Last Post: 04/21/2005, 06:11 AM
  4. Winch sale!
    By Triathlete in forum VX Talk...
    Replies: 6
    Last Post: 01/12/2005, 02:02 PM
  5. Looking for a bull bar with a removable winch
    By Eckstream in forum VX Talk...
    Replies: 8
    Last Post: 12/27/2003, 09:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails