Results 1 to 7 of 7

Thread: Tire with slow leak

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Feb 2003
    Location
    2001, Black, VX, 0781
    Posts
    974
    Thanked: 0

    Tire with slow leak

    My right rear tire has developed a very slow leak. Seems to take about 2 weeks to go from full to noticeably low. It is a stock 18" tire.

    Can this kind of problem be easily fixed? If so, any suggestions on how to do it myself or how much I should expect to pay to get it fixed?

  2. #2
    Member Since
    Jun 2003
    Location
    01,black,vx,
    Posts
    28
    Thanked: 0

    Unhappy

    my wife had the same problem on her car. it was a leaking valve stem small $$ to fix.
    i also need so help! i bought some mich. 275/55/18 for my stock rims and the tire shop could get it to pop the bead!? does anyone else have this problem with puting on oversized tire?

  3. #3
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3

    Thumbs up

    A slow leaking tire can be repaired (patched) by any tire shop as long as the hole/leak is not in the sidewall. Around here it costs 8-10 dollars. Much cheaper than a new tire.
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  4. #4
    Member Since
    Jun 2002
    Location
    2001, Proton Yellow, VX, 1379 (sold)
    Posts
    994
    Thanked: 0
    I've had success with the Monkey Grip plug kit that you can buy in any Kmart and it only takes five minutes once you locate the leak. I probably plugged my old Bridgestones 4 or 5 times in the last year. They were very susceptable to nails and screws when the treads got low.
    Gregg
    2001 Proton Yellow #1379

  5. #5
    Member Since
    Feb 2003
    Location
    '76 IH Scout II Tubed, 40"s, locked, etc
    Posts
    1,090
    Thanked: 0

    slow leak??

    had a slow leak on one of my Swampers. Problem was is that when I "air down" to 12-15 psi to go wheeling, the bead is vunerable to obstructions such as dirt, sticks, weeds, mud...etc
    These cause it not to seal properly and after you inflate it leaks slowly....mine started out to go flat after one month...then one week...then everyday...then overnight.
    Went down to tire shop and had them remove the tire from the rim, clean the bead area, and then put sealent all around the rim where tire sits and then remount and balance. Problem solved!!!

  6. #6
    Member Since
    Sep 2002
    Location
    12 Mini Cooper Coupe S fully modded and tuned!, 01 Kaiser VX #1209 RIP, 01 Kaiser VX #0664 Clone
    Posts
    1,678
    Thanked: 1
    You know, you can get that fixed for free at a lot of tire places! I would get it fixed before it causes a problem! You know it looses air, so I would take it in where they can find the leak!
    Ask forgiveness, not permission.

  7. #7
    Member Since
    Sep 2002
    Location
    '01 EBONY 1330 r.i.p. now '01 PROTON 0987
    Posts
    799
    Thanked: 0
    You could always try the " spray bottle of soapy water" technique to locate the source of the leak.

Similar Threads

  1. Going Drag racing in the slow lane!
    By ohiovx in forum VX Talk...
    Replies: 4
    Last Post: 11/07/2015, 12:20 PM
  2. Driver's Window slow to raise
    By curiouswords in forum VX Talk...
    Replies: 3
    Last Post: 05/11/2006, 10:41 AM
  3. slow starting
    By etlsport in forum VX Troubleshooting...
    Replies: 9
    Last Post: 03/09/2006, 07:13 AM
  4. Slow/dead windows
    By Apostle in forum VX Troubleshooting...
    Replies: 10
    Last Post: 12/22/2003, 05:40 PM
  5. Vmag dying a slow death?
    By Panther_Black_VX in forum VX Talk...
    Replies: 2
    Last Post: 05/28/2003, 10:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails