Page 1 of 3 1 2 3 LastLast
Results 1 to 15 of 41

Thread: Transfer Case Compatibility

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jul 2013
    Location
    1999 Ironman hopeful
    Posts
    23
    Thanked: 0

    Transfer Case Compatibility

    So my transfer case is on the outs in my '99 Ironman and I've already dropped the diff, swapped cv's, checked prop shaft, etc. It IS my transfer case that is going.

    Now that that is clear, is the Trooper transfer case with TOD compatible with the VX? I mean, can I drop my current transfer case, stick a TOD Trooper transfer case in, hook up driveshaft and drive off?
    I've searched and found that it SHOULD be possible but a few Isuzu veterans have told me that it might not work due to the fact that the Vehicross is full-time 4wd whereas the Trooper has the switch to activate TOD under 50mph.
    If that is the case, would I not be able to take the switch from the donor Trooper and install in the Vehicross to have a selectable beast?

    Hopefully I'll be pulling a transfer case from a yard come Sunday and if it does work I'll be rebuilding my original transfer case anyways. This would be more of a 'to get me by' fix.

  2. #2
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0
    Shouldbe identical, the difference with the selector switch is purely electronic, turning the TOD puter on or off. I would take the computer and switches if you are already there, would be much cooler with the swap.

    PS-doesnt have to be a trooper, the acura SLX would also be a compatible unit, that is where I got my last prop shaft.

    I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.
    Thomas Jefferson

  3. #3
    Member Since
    Jul 2013
    Location
    1999 Ironman hopeful
    Posts
    23
    Thanked: 0
    When you say outer, which one are you referring to? Got a picture of it?
    And Marlin, if this works, be expecting an Ironman to drop in and share a drink or two with you since you're the only one that could give me a straight answer sir!

  4. #4
    Member Since
    Nov 2012
    Location
    1999, Blue (Astral)5 spd VX #1396 ; '01 Proton 0753
    Posts
    775
    Thanked: 3
    puter as in computer not outer.
    There's no 'I' in denial.

  5. #5
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0
    No problem. If you want to drive up to washington, we can talk shop all day.

  6. #6
    Member Since
    Jul 2013
    Location
    1999 Ironman hopeful
    Posts
    23
    Thanked: 0
    Got the transfer case today.
    It's off of a 1998 Isuzu Trooper with TOD. Hoping to get it fitted soon. My only worry is that this one read 4422 000 004
    whereas the Vehicross reads 4422 000 002
    (there may be more zeros but the only digit that is off is the last one)

    I grabbed the button too but couldn't figure out the wiring and need help with which computer it is that I need to grab. I have no clue as I normally deal with completely mechanically driven 4wd set-ups. Any guidance on that?

    (I'll post pictures once I can get some off my memory card later tonight)

  7. #7
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0
    Tod computer is located under the passenger seat.

  8. #8
    Member Since
    Jul 2013
    Location
    1999 Ironman hopeful
    Posts
    23
    Thanked: 0
    Wiring for switch should be ran from switch to that 'puter eh?

  9. #9
    Member Since
    Sep 2014
    Location
    2001, Foxfire Red, 1283
    Posts
    123
    Thanked: 0
    Make sure that puter is grounded to the chassis, that's where I'd start.

  10. #10
    Member Since
    Jul 2013
    Location
    1999 Ironman hopeful
    Posts
    23
    Thanked: 0
    That sir, would be the reason it would have lit up. I didn't mount the 98 box, just unplugged it from my 99 and tried it. Guess those two screws ground it out?

  11. #11
    Member Since
    Sep 2014
    Location
    2001, Foxfire Red, 1283
    Posts
    123
    Thanked: 0
    When you mount it, it grounds it to the chassis.

  12. #12
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0
    Beat me to it, it needs to be grounded.

  13. #13
    Member Since
    Mar 2012
    Location
    sold
    Posts
    1,158
    Thanked: 0
    i talked to both borg warner and isuzu about the vx transfer case - other isuzu cases will work but the gearing is slightly different - the vx transfer case is completely unique to only the vx no other vehicle ever - confirmed this by both companies when doing my rebuild - so will another case work? probably - will it be exactly the same? no - and you'll prob always have a check engine light (which can be solved by taking the bulb out)

    that being said i dont see any real benefit to having the actual vx transfer case compared to one off a rodeo - especially if you can maintain tod regardless of what the stupid dash lights say - would be much easier to find parts for the trooper or rodeo tcase in the future (like the seals i had to wait 2 months for because they had to come on that slow boat from japan - both companies confirmed they were completely unique seals to the vx tcase - actually, the borg warner guy found one of the 3 i needed in a current case they make for hd ford pickups but i still needed the other 2)
    Last edited by evillecutter : 12/10/2014 at 09:42 AM

  14. #14
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    When/if mine goes I will replace it with a manuel tcase. TOD is just not something I require.
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  15. #15
    Member Since
    Mar 2012
    Location
    sold
    Posts
    1,158
    Thanked: 0
    im not sure what exactly happened to mine - im guessing previous owner tried to use 4wd low on dry pavement or something stupid like that - the guys at the driveline shop said they rarely have problems with borg warner products especially in passenger vehicles

    the only time i actually ever used tod was in the snow but it worked perfect - much better than any 4wd truck i have owned - always wanted to compare the vx to an awd subaru or something of about the same year to see which is better
    Last edited by evillecutter : 12/15/2014 at 02:33 PM

Similar Threads

  1. Transfer case #'s
    By simonsayz1 in forum VX Talk...
    Replies: 4
    Last Post: 01/29/2015, 01:01 PM
  2. what transfer case and trans do i get
    By givegodachance in forum VX Talk...
    Replies: 4
    Last Post: 11/04/2012, 11:44 AM
  3. 2WD transfer case?
    By So-CalVX in forum VX Talk...
    Replies: 1
    Last Post: 03/03/2008, 09:40 PM
  4. TOD vs Transfer Case - Same thing?
    By jimbo in forum VX Talk...
    Replies: 10
    Last Post: 05/08/2005, 09:57 AM
  5. Transfer Case
    By yal^ in forum VX Troubleshooting...
    Replies: 14
    Last Post: 04/16/2005, 10:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails