Transfer Case Compatibility

[Audacity]

Well, thanks to that slip yoke not compressing I have to put off moving into the new place a day.
I have two bolts on the passenger side that I just don't have enough leverage to get off with a boxed end wrench. I'm soaking everything in PBlaster and hoping that it comes off easier tomorrow morning when it's forecasted to be 19 in the morning with a blistering high of 30

12:22AM
Got the last two bolts out, dropped the case and got it into the garage... The danged prop shaft is still connected at the transfer case. It can have it.
I swapped over my speedogear for continuity sake, and I'm waiting on daylight to get at installation.

[Audacity]

I can say that without a doubt the TOD case from a Trooper is a direct swap to the Vehicross.

EXCEPT:
The front driveshaft will be needed from the Trooper as well, due to the CV style joints in the VX driveshaft.

The only difference I noticed is the Trooper TOD shifter is angled back a tad whereas the VehiCROSS is straight up and down.


I'll be compiling my photos to correspond with the factory service manual directions over the next few days but be patient as I'm also moving into a new place