Page 1 of 3 1 2 3 LastLast
Results 1 to 15 of 38

Thread: Cladding Restoration

  1. #1
    Member Since
    Mar 2012
    Location
    2001 Ebony #0254
    Posts
    395
    Thanked: 16

    Cladding Restoration

    *I do NOT recommend Forever Black*

    I applied the product to the VX and waited a week before washing it, I went to the car wash and washed it as I normally do (run of the mill do it yourself high pressure car wash) after I rinsed it I noticed some area looked discolored so I drove home and waited to see how it looked after drying it. Well it looked like crap, some of the product washed off and it was then splotchy grey and black. They claim it dies the plastic but it did not on the VX. I cleaned and prep'd it better than they instructed so I do not believe that was why it did not color the cladding. I plan to remove it all at some point and just live with it the way it is, I am not impressed with the results.

    I have been testing a product and I know some others have also been trying some restoration products too, so I am starting a new thread about this because most of the threads I found are so old the products used in them are no longer available so I am going to post what I found here and hope others will post their recent finds here or links to other recent threads I may have missed.

    I am only testing the products that claim to dye the plastics and rubbers because I have tried at least 10 different reconditioning type products and none of them lasted longer than a few months on my VX.
    My cladding was very chalky when I got it and all the products that did not add color or have a dye in them lasted less than a few months, I think some of the products made mine look worse the cladding would get streaks and spots on it after a rain or snow and stay that way until I reapplied some more product.

    I am trying Forever Black and have tested it on a spare piece of cladding. I did use a degreaser and then after that I cleaned it the cleaner they provided to be sure all the layers of grease and silicone products I tried on it were removed before using the dye. Here is the youtube product video. It says permanent and then says should last years which is longer than to so called permanent hair die I use, I think the permanent refers to not being able to wash it off or remove it once it is applied. After I dyed it and I did spray cleaners and degreasers on my test cladding, scrubbed it and rinsed it then I rubbed it dry with a towel and none of the color came off or changed.
    https://www.youtube.com/watch?v=wNfQUq8soBg

    My PhotoBucket with more pictures of the cladding and the product packaging. http://s920.photobucket.com/user/Red...?sort=3&page=1

    Before applying any products.


    First coat and section, you can see some white spots and scrapes next to the first section, the dye does cover them completely in the next picture.


    Second coat over the first one, I cannot see the line from the first section I did.


    I left it oustide for a few days in the snow and let the snow melt on it to see if it streaked like the other products did.


    I did one more section and put it on as tin and light as I could to show a very thin coat.

    This picture shows from left to right, no product at all, a very thin light coat in the middle and a good coating on the right.

    I am going to do the VX based on my findings, I think it looks good and as bad as the VX looks I have nothing to lose. I will post before and after pictures of the VX when I do it and try and remember to post a picture every 6 months or so to see how it compares to the initial application.

    I think this stuff is similar to the showroom new used in this thread.
    http://www.vehicross.info/showthread...light=cladding
    I could not find showroom new anywhere so I moved on to the forever black.
    Last edited by CatFish : 04/28/2016 at 01:28 PM Reason: Product NOT Recomended

  2. #2
    Member Since
    Feb 2011
    Location
    2001, Kaiser Silver, VX, 0871
    Posts
    117
    Thanked: 1
    If You Spray The Cladding With Gatorback Paint In A Spray Booth Then Bake It On - You Never Have To Apply Any Of These Black Products To The Cladding - Just Wash Normally !

  3. #3
    Member Since
    Nov 2009
    Location
    2001Proton 1432, ex 2001 Dragon Green Mica 0168 (RIP May 2017)
    Posts
    3,590
    Thanked: 31
    As long as you don't mind changing the texture and look of the cladding you are correct.
    Live, Love, Forgive and Never Give Up

  4. #4
    Member Since
    Feb 2011
    Location
    2001, Kaiser Silver, VX, 0871
    Posts
    117
    Thanked: 1
    I Had My Entire VX Cladding Sprayed With Gatorback & It Did NOT Change The Texture !

  5. #5
    Member Since
    Nov 2009
    Location
    2001Proton 1432, ex 2001 Dragon Green Mica 0168 (RIP May 2017)
    Posts
    3,590
    Thanked: 31
    All I know is that I've got some spare pieces from a member here that have the aerosol Gatorback applied and it's a very different look than my untreated cladding. Maybe yours being professionally done makes a difference.

  6. #6
    Member Since
    Feb 2011
    Location
    2001, Kaiser Silver, VX, 0871
    Posts
    117
    Thanked: 1
    I Did NOT Use A Spray Can. I Bought A Qt Of Gatorback Paint & My Friend That Owns A Body Shop Painted The Entire Cladding In A Spray Booth Then Baked It & Left it Over Night In The Booth to Dry. It Did NOT Change The Texture At All. The Spray Can Is Only Good To Touch Up If Needed !

  7. #7
    Member Since
    Mar 2012
    Location
    2001 Ebony #0254
    Posts
    395
    Thanked: 16
    Pleas show us pictures of the Gatorback treated cladding with a close up too so we can see what it looks like.

  8. #8
    Member Since
    Feb 2011
    Location
    2001, Kaiser Silver, VX, 0871
    Posts
    117
    Thanked: 1

  9. #9
    Member Since
    Nov 2006
    Location
    1999 silver VX #0183
    Posts
    99
    Thanked: 1
    I use Forever Black and haven't found anything I like better FOR THE PRICE. I did use Rustoleum's plastic black spray paint and it was fine, but I liked ( and others ) the FB glossy look better so I have covered the paint with it. I reported on the FB product several times over the years on this forum. It DOES sometimes chip or wear along the bottom from road debris that hits it after a while. I just touch it up with FB. I have gone a few years without doing that off and on.

  10. #10
    Member Since
    Nov 2006
    Location
    1999 silver VX #0183
    Posts
    99
    Thanked: 1

  11. #11
    Member Since
    Jan 2003
    Location
    01 Ebony 1433
    Posts
    29
    Thanked: 0
    Just a thought..I've been applying "Wipe New" once a year for 4 years now, and it's so much better than anything I've used previously.
    It also takes the scratches in your cladding to the same finish as the top of the cladding....I bought the last bottle at Bed, Bath, and Beyond in Spring 2015 for $19.99....literally, just apply once a year, and forget about dealing with the cladding for that year.

  12. #12
    Member Since
    Jul 2012
    Location
    2000 Dragon (lilasskckr)
    Posts
    101
    Thanked: 0
    Quote Originally Posted by disasterlady View Post
    that is the look I'm going for.

    How many coat's did you apply?

    Do you think it works with mirror's, luggage rack, hood insert?????

  13. #13
    Member Since
    Mar 2012
    Location
    2001 Ebony #0254
    Posts
    395
    Thanked: 16
    The forever black it the product I posted about testing in the original thread starter post, The tests I did was just to see how the forever black reacted to the cladding and how heavy it would need to be applied to restore the cladding. I like the way my tests turned out and plan to do the whole VX this weekend, I do plan to try it on the other plastic that has faded like the mirrors and roof rails.

    I am not going to put it on the hood insert because it is fiberglass and painted and the Forever Black was not designed to be applied to paint and probably will not work and look worse.

    Forever Black is meant to be used on plastic, vinyl and rubber only according to the packaging.

  14. #14
    Member Since
    Nov 2006
    Location
    1999 silver VX #0183
    Posts
    99
    Thanked: 1
    RE:bssage
    I remember trying it on my hood insert before I put the wrap on it, and it seems from what I remember, I had too much wax or silicone buildup to make it take it ( very important )? I do use it on the roof racks, interior plastic surfaces like dash & glove box, gearbox cover, windshield wiper arms and mirrors successfully, although the mirrors chip off easier as it has the smoother surface. It took one coat in some places and up to 3 coats in others, but I did learn NOT to apply 2nd coat until first was totally dry and not to apply any of the coats in the hot California summer weather, haha... streaked easily then, but the streaks can be covered with additional coats. I would say that this reminds me of liquid shoe polish and it works best on a saturated foam applicator. Year ago, I actually contracted the inventor of it and he said you can even use paint remover solvent to remove any of the FB to redo it, etc. I actually have done that and it worked, I remember him warning how he wasn't sure how the solvent would affect our cladding, but I don't recall any issues. On our VX Cladding surface, to get it to adhere well, you have to prep the surface by cleaning it from ANY wax or silicone ( such as ArmorAll ) first… I used Dawn dish washing detergent in water and a scrub brush, but you could use what you like. hope that helps

    DLady

  15. #15
    Member Since
    Nov 2009
    Location
    2001Proton 1432, ex 2001 Dragon Green Mica 0168 (RIP May 2017)
    Posts
    3,590
    Thanked: 31
    I saw Christine's test piece yesterday and it looked good. It's very dark, but it's shiny. If you don't like the glossy look this is not the product for you.

Similar Threads

  1. Cladding restoration
    By Cstoops72 in forum VX Modifications...
    Replies: 19
    Last Post: 08/31/2014, 01:55 AM
  2. 3M Headlight Restoration Kit
    By VX KAT in forum General Tips...
    Replies: 33
    Last Post: 11/09/2012, 09:58 PM
  3. Cladding Restoration...so Easy & Dope!
    By mike nomy in forum General Tips...
    Replies: 64
    Last Post: 04/10/2012, 08:02 AM
  4. VX Restoration Begins!
    By nfpgasmask in forum VX Talk...
    Replies: 25
    Last Post: 02/02/2012, 08:39 AM
  5. Headlight Restoration
    By crager34 in forum General Tips...
    Replies: 4
    Last Post: 02/04/2008, 10:48 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails