Need some help on wire routing

[mantis465]

Hi hoping someone on here might be able to shed some light on a few problems I am having. I took my VX apart about 3 years ago to do a frame off restoration I took many pictures at the time documenting it for reassembly and have since lost the phone they were stored on. I am finally putting truck back together but need some assistance and hopefully some pics of how a few wires and vacume lines go.

Was wondering the following
-routing of battery harness to alternator
-Battery harness to starter
-Transmission harness to body harness behind left head light
- transmission harness routing
-Vacuum lines to and from the small brown solenoid on left rear portion of engine close to brake booster
- also a picture of the left and right side of Engine bay would be great.
Anyways just wanted to say thanks in advance I have spent hours searching the forum for pictures to help but am now hoping someone could give me a few perfect pictures of the locations in question.

[Mile High VX]

I have these. Hope it's helpful.

[mantis465]

Thanks for pictures I should have mention pictures of motor with engine cover off, and for the under hood was hoping for birds eye view. Really appreciate the help though so far

[Mile High VX]

Sure thing...lots of other pics in my gallery that might be helpful.

[Jayd-S]

Hi hoping someone on here might be able to shed some light on a few problems I am having. I took my VX apart about 3 years ago to do a frame off restoration I took many pictures at the time documenting it for reassembly and have since lost the phone they were stored on. I am finally putting truck back together but need some assistance and hopefully some pics of how a few wires and vacume lines go.

Hi Mantis465

Here is a link to download the workshop manual which includes all circuit diagrams and locator diagrams for the harnesses, components and connectors:
http://www.carfsm.com/part_1132/Isuz...air+Manual.htm
Hope this helps,
Geoff

[Jayd-S]

Hi Mantis465,
Here is another link to download the workshop manual just in case the first does not work:
http://myvehicross.com/download/vehi...rkshop-manual/
Geoff

[mantis465]

Thanks mile high some great pics there found out were the vacuum line goes but still stumped on the rest.

Thanks for the tip Jays-s but I have access to all-data and Michell on demand and neither were any help. can't see that online source being any better?

No body has any other pics as mentioned above?