Results 1 to 10 of 10

Thread: ABS Locking?

  1. #1
    Member Since
    Jul 2003
    Location
    01 Proton VX.0851
    Posts
    144
    Thanked: 0

    ABS Locking?

    Saturday morn. going to work in the midst of a fast 5 inch snow blizzard, my VX handled like a dream, passing big rigs on the expy doin bout 55mph w/out plowed roads. No problem until I reached the off ramp and applied the breaks. I was down to about 25 mph when if felt like my breakes locked. I started to skid( A STRAIGHT SKID ), but by break pedal felt like it stopped at half way. It felt just like when its depressed when the engine is off. Idid feel a great pulsing sensation when pressing down, but still only until I came to FULL STOP did I get control of the breaks again. So there I am just 3 blocks from work on the unplowed main road,doin no more than 20 mph when I was about to turn rt into my driveway,when it happened again. I couldnt even turn into the driveway because the breaks went halfway down , pulsated & caused me to go into a straight skid. In the uncleared parking lot on the snow it kept happening, but when it rained a few hrs later and all turned to ice , I did some hard driving in the empty lot and had no problems breaking . I had it to near 45 mph & hit the breaks hard and it was beautiful, Stopprd on a dime. But when I drove very slow on some patches of snow it all happened again, What can this be?

  2. #2
    Member Since
    Sep 2002
    Location
    '01 EBONY 1330 r.i.p. now '01 PROTON 0987
    Posts
    799
    Thanked: 0
    I think I remember some old posts about snow becoming packed in or on the abs sensors and causing intermittant problems.

  3. #3
    Member Since
    Jul 2003
    Location
    01 Proton VX.0851
    Posts
    144
    Thanked: 0
    thx SGT. I will look into these posts

  4. #4
    Member Since
    Jun 2002
    Location
    2000, Proton, VX, 0689
    Posts
    25
    Thanked: 0
    Biggest thing I learned when driving in the snow with my VX, was when trying to stop with the ABS, was to shift into neutral. The torque on the VX without disengaging the engine, would move you further than you needed to go. By shifting into N you are able to stop the VX much easier.
    Just my 2 cents.
    Jeff
    former 2000 Proton owner
    Lehigh Valley, PA

  5. #5
    Member Since
    Jun 2003
    Location
    1999, White, Ironman, 1626
    Posts
    168
    Thanked: 0
    good point jeffkics...

    Sheik, I have experienced the same problem with the ABS. It almost put me into a telephone pole last week and almost into someone's yard yesterday.

    I have been pulling my ABS fuse when the weather gets snowy. It has worked well for me, but I don't it's a permanent solution. (Although I saw another member of the board posted a how-to install an ABS disconnect switch).

    Just letting you know that you're not alone.

    Joe

  6. #6
    Member Since
    Dec 2002
    Location
    '01 Ironman
    Posts
    1,286
    Thanked: 0
    When you get that pulsating in the pedal the ABS is working. If you only depress the brake halfway then your only using half your brakes. Yes it feels like it only wants to go halfway but if you really press on it hard you will stop quicker. However once you get used to when the ABS will kick in you can brake better by using your brakes up 'till the ABS would kick in. If the ABS kicks in you should be able to steer still (somewhat) It helps if your about to rear end someone and your trying to brake but the last second you can still hit the ditch/berm while you are braking instead of skidding straight into the car in front of you.
    2001 Ironman Daily Driver... 3.5" suspension lift (OME912 springs and 1" spring spacer), ball joint flip, 1.5" front diff. drop, 33"x12.5 TrXus MT, 16x10 Eagle Alloy rims, Interceptor, PV muffler, K&N air filter, Alpine Supercharger, Bilstein shocks, and some trimming.

    2000 Ironman Project LS-1 VX... very slow progress but someday....... ohhhhh someday......

  7. #7
    Member Since
    Jul 2003
    Location
    01 Proton VX.0851
    Posts
    144
    Thanked: 0
    good advice & thanks, but there still must be some sort of problem here because it only happens to less than a handfull of us VX'ers.If it doesnt happen to other VX'ers, then why is it happining to just a few? Maybe something need be looked into, for this is a BIG & DANGEROUS problem. BTW Ive been driving on snow for many years & with abs in my BMW.No problems like these.

  8. #8
    Member Since
    Aug 2003
    Location
    2001, Dragon Green #0891 [retired ;_;]
    Posts
    303
    Thanked: 0
    Havn't had this problem, but I was thinking maybe its the difference in a 4wd ABS and a 2wd ABS?? I know its my first 4wd and I'm having to get used to the way it drives (ie: punching the gas into a sharp curve can somtimes lead to over steering/turning with all 4 tires pushing/pulling me through the corner).

  9. #9
    I've had the same braking issue. I think we're only hearing about it from those of us who live in the snow-belt. We got about a foot of snow last week and I ran into the same situation. It only seemed to happen at street speeds, not highway. Neutral is the best solution I found. Before the VX I always used neutral in the winter, so it was kind of habit anyways. Snowboarding is a blast, just not in my car.
    Stick with what works.

  10. #10
    Member Since
    Jun 2003
    Location
    1999, White, Ironman, 1626
    Posts
    168
    Thanked: 0
    AlaskaVX, thanks for the explanation, but I really do think this is an isolated problem for some of us... not normal ABS operation. I have pushed on my pedal as hard as I could (and I'm no frail little thing ) and I still wasn't stopping.

    I will definitely use the Neutral method of stopping when necessary.

    I am going to have my 30,000 miles service down after the holiday and I definitely am going to have them check the brake system and ABD thoroughly.
    I think that it's about time for a brake change (pads) and that may have some influence on my problem.

    Until then, I will drive in snowy conditions with the ABS fuse in my pocket.

    Joe

Similar Threads

  1. Locking the TOD to 50/50 in 4H...on a JDM
    By Sakkie in forum VX Modifications...
    Replies: 3
    Last Post: 02/24/2015, 05:39 AM
  2. TOD Locking?
    By Vaso in forum VX Talk...
    Replies: 20
    Last Post: 10/01/2010, 12:38 PM
  3. Manual Locking Hubs
    By Solitude in forum VX Talk...
    Replies: 68
    Last Post: 08/17/2009, 08:09 PM
  4. Disable locking gas cap/door
    By VX KAT in forum General Tips...
    Replies: 13
    Last Post: 02/04/2009, 09:35 PM
  5. locking hubs
    By 4x4boy in forum VX Modifications...
    Replies: 7
    Last Post: 06/01/2006, 07:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails