So my ABS Light has been coming on and going off intermittently for months. When I first got the VX I replaced all of the pads and rebuilt the calipers. Since I had the hood open anyway for round two of the Seafoam treatment to try and clean out the EGR system, I decided to check all of the fluids. My brake fluid was just under the “add” line. I filled it to about 1/4” below the “max” line and the light went off. Hopefully this fixes the issue. Hopefully.

I also reset the 401 code for “low EGR flow” while doing the cleaning. So far, it hasn’t come back. We shall see. I still have two cans of SeaFoam. Fortunately I am getting good at this process. I may have to make it part of my regular service.

Oh! And there is no sign of oil burn since I changed the oil while it was in the shop, for the EGR fix! Yay!