From the shop manual:
Normal Pressures for the AC lines are Low Side: 21.3-42.7 psi and High Side: 199.1 to 270.2 psi
Your high side seems fine, so working from the manual on low side:
Symptom: Suction (Low Abnormally High. Gauge) Pressure Low pressure gauge (Low pressure gauge is lowered after condenser is cooled by water.)
Cause: Excessive Refrigerant In System
Fix: Discharge and Recover, Replace Coolent to recommend levels
---
Symptom: Suction (Low Abnormally High. Gauge) Pressure Low pressure hose temperature. (Low pressure hose temperature around the com compressor ressor refrigerant line connector is lower than around evaporator.)
Cause: Unsatisfactory valve operation due to defective temperature sensor of expansion valve.
Fix: Replace the expansion valve.
Cause: Expansion valve opens too long.
Fix: Replace the expansion valve.
---
Symptom: Suction (Low Abnormally High. Gauge) Pressure High and low pressure gauge balanced quickly. (After turned off A/C)
Cause: Compressor gasket is defective.
Fix: Repair or Replace Compressor
---
Symptom: Suction (Low Abnormally Low. Gauge) Pressure, Insufficient cooling.
Cause: Insufficient refrigerant in system.
Fix: Check for leaks. Discharge and recover the refrigerant. Recharge to specified amount.
---
Symptom: Suction (Low Abnormally Low. Gauge) Pressure, Frost on the expansion valve inlet line
Cause: Expansion valve clogged.
Fix: Replace the expansion valve.
---
As you can see, there are a lo trof variables. A/C systems should be checked by a certified A/C mechanic.
--------
VX Status: Running Great! Build is coming along nicely...