Results 1 to 9 of 9

Thread: #1 Cyl. Missfire???????????????????

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3

    Question #1 Cyl. Missfire???????????????????

    VX was running great last night. Check engine light came on this morning. Took it to Autozone for the code. #1 cylinder missfire. Engine idles rough. Besides plugs, which will be replaced, is there anything else I should check (if plugs don't do the job)?
    Thanks in advance for the help!
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  2. #2
    Member Since
    Sep 2003
    Location
    2000 Ironman 0591
    Posts
    139
    Thanked: 0
    Check the coil(red thing on top of spark plug) to make sure its firing.... Also Id check the injectors. But I wouldnt run it too long like that. Could lead to MAJOR problems.

  3. #3
    Member Since
    Nov 2003
    Location
    2004 Frontier S/C formally '99 1174
    Posts
    279
    Thanked: 0

    Question Is it making a loud tapping sound??

    That is not a good sign. That is exactly where the bearing problem starts that I had and Coach just experienced. I replaced my engine with a new 3.5 from Isuzu. Coach is currently swapping a 5.7 liter GM engine (fingers crossed). Take it and get it checked immediately by a reputable mechanic or the dealer. Not something to take lightly. I hope it is the coil pack or a plug and not an internal engine problem.

  4. #4
    Member Since
    Jun 2002
    Location
    2000 Ebony VX #263 ****** VX-2 My weekend car
    Posts
    2,067
    Thanked: 7
    Call the dealer and tell them what is happening. Doesnt sound like you should drive it. ;eekr;
    Anita
    2000 Ebony #263
    Original Owner- love her too much to part with her.
    AnitaProtich.com

  5. #5
    Member Since
    Apr 2003
    Location
    2001, Ebony, 0761
    Posts
    102
    Thanked: 0

    Missfire in #1

    Check Red #1 Coil. Remove Red coil and check for moisture underneath. The chamber is o-ringed sealed. A little moisture will cause big problems.

    Howard

  6. #6
    Member Since
    Jul 2003
    Location
    gone but not forgotten
    Posts
    61
    Thanked: 0
    When i got mine it had set on the showroom floor for 18mo and only had 158 miles. It quickly developed a #3 misfire which turned out to be an injector. You can swap the coils and see if the miss moves and listen to the injectors and compare the click or lack of. Mine was not working but when i tapped on it, it started working, so I cleaned the injectors and it has been fine for the last 25k. A minor miss will turn the light on but if is really bad the light will start to flash and then it should definatly not be driven then.
    ________
    D platform
    Last edited by skunkworks : 02/02/2011 at 11:13 PM

  7. #7
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    Thanks for all the responses. I will check these things along with change the plugs in the morning. Will let you know what I find.

  8. #8
    Member Since
    Jun 2002
    Location
    99, Ironman, 0909
    Posts
    196
    Thanked: 0
    Hi Billy-- sorry to hear about this. It's probably just your truck's way of asking for a weekend off after that last Chivo Falls trip...
    :sighr:

    I'll be around Sunday if you need a hand with anything.

  9. #9
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3

    Happy Ending!

    Well, all ends on a good note. The VX is once again healthy and running like a thoroughbred. Pulled the plugs. Previous owner had replaced them with cheapo Champions. I put in a new set of Bocsh Platinum 2's and reconnected the battery. Started her up and "damn" same symtems! Disconnected the battery again and tapped on the fuel rail and injectors then reconnected the battery. Started her up and she purred like a kitty! Drove her around a bit and no problems!!!
    Also noted that all cylinders appeared to be burning equally, all plugs looked equally burned, all were dry and no appearance of oil!!!!

Similar Threads

  1. I have a big problem with my Vehicross Missfire
    By stokes_osu in forum VX Troubleshooting...
    Replies: 6
    Last Post: 09/05/2009, 05:31 AM
  2. intermittent(sp?) missfire
    By TDUB in forum Meets...
    Replies: 4
    Last Post: 03/01/2004, 08:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails