Results 1 to 14 of 14

Thread: Gear shift problem

  1. #1
    Member Since
    Jan 2004
    Location
    2000 IRONMAN
    Posts
    15
    Thanked: 0

    geer shift problem

    Hi guys, i just a VX and this is my first truck/SUV/4WD ^^ and i had a sedan before.

    this is my second day own the Vx and so far i am pretty happy about it. But there is one thing I notice is that when my geer shift from R to D (drive). The geer shift makes a big noise under the back seats, it sounds like a someone randonly drop a 40lbs object on the ground. Is it normal for a truck or SUV or it is special design for a 4WD?

    and also i had read lots of good commends about how great the ride is, but since i drove i found out the ride is not smooth at all. It bounces a lot ( really a lot ) whenever drive over a hole or an object. Is it normal? or my expectation is too high compare to my old Lincoln towncar ( air shock )

    Thank you guys


    Colin

  2. #2
    Member Since
    Dec 2002
    Location
    '01 Ironman
    Posts
    1,286
    Thanked: 0
    As for the ride it gives a good bounce when you hit a bump but it should quickly recover from it and ride smooth. If you continue to bounce a ways down the road after hitting a bump then most likely your shocks are bad.

    For the shifting, it does give a little clunk (especially in 4Lo) but its not a 40lb weight sound, maybe a 5lb weight (for me it doesn't happen unless I'm on an incline) I found that if you put it in neutral after you park, let it setttle then put it in park you won't get the clunk. Maybe go under your car (while in neutral) and give your drive shaft a good shaking to see if it moves.
    Last edited by AlaskaVX : 02/19/2004 at 02:32 PM
    2001 Ironman Daily Driver... 3.5" suspension lift (OME912 springs and 1" spring spacer), ball joint flip, 1.5" front diff. drop, 33"x12.5 TrXus MT, 16x10 Eagle Alloy rims, Interceptor, PV muffler, K&N air filter, Alpine Supercharger, Bilstein shocks, and some trimming.

    2000 Ironman Project LS-1 VX... very slow progress but someday....... ohhhhh someday......

  3. #3
    Member Since
    Nov 2003
    Location
    2004 Frontier S/C formally '99 1174
    Posts
    279
    Thanked: 0
    It will not ride like a floaty air-bag Lincoln. It should feel tight and it will jolt when you hit a bump. It's more like driving a sports car than a truck.

    The shifting noise is something else. Mine doesn't make that kind of noise when shifting from R to D. You may want to have the U-joints checked out.

  4. #4
    Member Since
    Feb 2004
    Location
    2001, SUPERCHARGED!
    Posts
    507
    Thanked: 0
    I have the same problem with shifting, it's been like that from the day I bought it brand new.

    I said something once to my dealer about it and he said, "Isuzu's are loud"....ok.

    my two cents...
    Draftsman of the dead

  5. #5
    Member Since
    May 2003
    Location
    '99 Astral #1613
    Posts
    1,317
    Thanked: 0
    zzzyang,

    I can hear the shift in mine too, but it's nothing I'd ever worry about. Yours must be louder.

    It's normal to bounce a bit in the bumps - chalk that up to the short wheelbase and firm suspension. Mine rides great on a nice stretch of road - great road manners for an SUV. Compared to my dad's Navigator and Explorer before that - well, there is no comparison.

    I love to feel the road. My parents had a Mercury Grand Marquis for a while, and it really did feel like it was floating. Granted, it wasn't the first thing I ever drove so I was already used to some road feel, but I hated that car. I want to feel some feedback. I much preferred my Avenger and now the VX because they give a bit of a kick on the bumps. There are times I think it would be bad not to have that.

  6. #6
    Member Since
    Aug 2003
    Location
    1999,Silver,Vehicross,0928
    Posts
    1,087
    Thanked: 0
    there a pretty loud *clunk* when i shift to...i think its pretty normal cause we do have a good amout of torque even at idle....
    ________
    Orangedouce Live
    Last edited by MZ-N10 : 09/05/2011 at 02:50 PM

  7. #7
    Member Since
    Jun 2002
    Location
    99' Astral Silver
    Posts
    581
    Thanked: 0
    Towards the end of last year I had a problem with the tranny shifting.

    It would not go in to reverse or drive on occasion. Even though the gear indicator showed it was in gear. This started happening more often over a weeks time. I got concerned when it started banging in to gear after a hestitation to actually shift in to gear.

    The dealer had it for a day and stated they "Adjusted the Auto Trans Shifter Lever" to fix the problem.

    Not sure if this is the type of problem you are experiencing but at least when you take it to the dealer you have something to tell them to look at.

    Hope this helps
    Live Free or DIE!

  8. #8
    Member Since
    Jun 2002
    Location
    2001 Proton VX #0662
    Posts
    495
    Thanked: 0
    I don't think the noise is normal. I never hear any sound when shifting from reverse to drive or vice-versa.
    Canadian VXer!

  9. #9
    Member Since
    Oct 2002
    Location
    2001, Ebony/Red, 0189
    Posts
    41
    Thanked: 0
    I have the noise. It has gotten worse over time. The dealeship checked the rear and said it was fine, but not the U-joints. I just live with it. It's worse on an incline as well. Still don't think it is anything devistating.

  10. #10
    Member Since
    Jan 2004
    Location
    2000 IRONMAN
    Posts
    15
    Thanked: 0
    Guys, thanks for the advices, i really appreacite it.

    i guess i need to get used to this vehicle, and i think i am spoiled by the air ride from Lincoln ^^

    the VX is really a eye catcher, i have had for two days and more than 20 people had have talk to me about this vehicle in first day of the ownership. ^ ^

    Thank you


    Colin

  11. #11
    Member Since
    Feb 2004
    Location
    1999, Black, Vehicross, 0529
    Posts
    35
    Thanked: 0
    I have the same problem and I had the same klunk in the trooper I had before.

    I guess its saying its ready to move.............
    -Fred

  12. #12
    Member Since
    May 2003
    Location
    '99 Astral #1613
    Posts
    1,317
    Thanked: 0
    I can hear a slight something going to reverse, but the only thing I ever get that I'd call a clunk is occasionally when stopping and it gets to about 5 mph. Which is apparently pretty normal for the VX and Troopers.

  13. #13
    Member Since
    Jul 2003
    Location
    2001, proton, 0310
    Posts
    136
    Thanked: 0
    Wow!! ZZZYANG you went from a Lincoln Towncar to a VX?

    That's like having a wife that looks like Geraldo Rivera in drag, then waking up one morning and realizing it...knawing your arm off at the shoulder and marrying Nicole Kidman!

    Now as for the ride...get used to it....you are diving Nicole now not Geraldo;

  14. #14
    Member Since
    Jan 2004
    Location
    2000 IRONMAN
    Posts
    15
    Thanked: 0
    haha ........i am getting used to my VX now....i am loving it

Similar Threads

  1. new shift knob
    By vxfocus in forum VX Modifications...
    Replies: 12
    Last Post: 05/02/2011, 04:52 PM
  2. Gear won't shift out of Park! Anyone with solution?
    By magda76 in forum VX Troubleshooting...
    Replies: 15
    Last Post: 08/07/2009, 01:50 PM
  3. 4400 RPM "LAG" in third gear 3rd Gear
    By Ikkesh in forum VX Troubleshooting...
    Replies: 3
    Last Post: 04/15/2009, 05:13 PM
  4. Button on the gear select shift
    By ThunderChicken in forum VX Talk...
    Replies: 4
    Last Post: 10/13/2004, 12:32 PM
  5. Shift out of park w/out key?
    By JAFO in forum VX Talk...
    Replies: 7
    Last Post: 08/24/2003, 02:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails