Results 1 to 10 of 10

Thread: Chaging fluids...

  1. #1
    Member Since
    Feb 2004
    Location
    2001, SUPERCHARGED!
    Posts
    507
    Thanked: 0

    Chaging fluids...

    Ok, I want to run out and buy the best fluids to change out my transmission and differential(sp?)

    Questions are:

    How much do I buy for each and what are the best?

    Thanks- Jay
    Draftsman of the dead

  2. #2
    Member Since
    Jun 2002
    Location
    '99 SC Ebony #1961
    Posts
    1,559
    Thanked: 0

  3. #3
    Member Since
    Feb 2004
    Location
    2001, SUPERCHARGED!
    Posts
    507
    Thanked: 0
    Cool, I'll go with the Mobil 1.

    To get this straight,

    Tranny 10 quarts?

    front and rear diffs 4 quarts?

  4. #4
    Member Since
    Dec 2002
    Location
    '01 Ironman
    Posts
    1,286
    Thanked: 0
    Don't forget the X-fer case, I think its another 4 quarts?
    2001 Ironman Daily Driver... 3.5" suspension lift (OME912 springs and 1" spring spacer), ball joint flip, 1.5" front diff. drop, 33"x12.5 TrXus MT, 16x10 Eagle Alloy rims, Interceptor, PV muffler, K&N air filter, Alpine Supercharger, Bilstein shocks, and some trimming.

    2000 Ironman Project LS-1 VX... very slow progress but someday....... ohhhhh someday......

  5. #5
    Member Since
    Jun 2002
    Location
    '99 SC Ebony #1961
    Posts
    1,559
    Thanked: 0
    My Isuzu shop used:

    14 qrts (Mobil 1 ATF) for the tranny flush and fill

    3 qrts (Mobil 1 ATF) for the transfer/TOD cases

    4 qrts (Mobil 1 Gear Lube Oil 75w 90 )for the diffs/ also added a lsd additive to the rear diffs.

    5 qrts (Mobil 1 10w 30) engine oil
    Last edited by Cyrk : 03/04/2004 at 01:24 PM

  6. #6
    Member Since
    Feb 2004
    Location
    2001, SUPERCHARGED!
    Posts
    507
    Thanked: 0
    Got it, thanks guys!

  7. #7
    Member Since
    Sep 2002
    Location
    '99 Astral #1977
    Posts
    577
    Thanked: 0
    If you are not having the trans flushed, you will NOT need 10 to 14 quarts of trans fluid. IIRC... I used 4 (?) for drain and fill.
    RichD
    ------------------------------------------------
    ...because vinyl just sounds better!

  8. #8
    Member Since
    Jun 2002
    Location
    '99 Ebony Black VX, 0339
    Posts
    2,073
    Thanked: 0
    Tranny capacity with converter is only 9.1qts and you will only get 3-4 out with a regular drain and fill.

  9. #9
    Member Since
    Feb 2004
    Location
    2001, SUPERCHARGED!
    Posts
    507
    Thanked: 0
    Should I change out the trans filter(30K)?

  10. #10
    Member Since
    Sep 2002
    Location
    '01 EBONY 1330 r.i.p. now '01 PROTON 0987
    Posts
    799
    Thanked: 0
    Yes, you should. It requires supporting the trans and dropping the crossmember to remove the pan.

Similar Threads

  1. AHH!! wrong fluids
    By etlsport in forum VX Troubleshooting...
    Replies: 17
    Last Post: 05/30/2006, 09:14 PM
  2. fluids changed
    By tngerman2000 in forum VX Troubleshooting...
    Replies: 3
    Last Post: 03/04/2006, 04:48 PM
  3. changing all fluids
    By thedutchguy in forum VX Troubleshooting...
    Replies: 13
    Last Post: 10/17/2004, 12:08 PM
  4. Fluids question...
    By Cyrk in forum VX Talk...
    Replies: 30
    Last Post: 04/01/2004, 07:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails